See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: Carbonda fm936 Thoughts Ordered my frame last week - super excited to receive it. I did decide to size down to a L (I am 188cm tall) to keep a bit quicker handling and climbing.

A few questions:
1. What is the max rotor size the rear will accept? hoping to go 203mm up front and 180mm out back.
2. Are most people ditching the headset that they include? I opted for it as it was pretty cheap. Not sure about quality.
3. Does the frame come with hardware bushing required for the upper shock mount (8mmx22.2mm).
4. I've seen people saying you should open up all the bearings on the rear link and grease them. I think I'll be doing that (not a question I guess..)

Went with custom paint job too! Will post a pic when I receive it in the next month or so.
August 22, 2020, 07:56:51 PM 		3
Re: Carbonda fm936 Thoughts Just received my frame with custom paint job. Super stoked to build it up. Like everyone else has said, I opened up all the pivots and greased everything. Overall quality seems good. Will post a final build pic and what parts I used.


October 10, 2020, 03:36:56 PM 		4
Re: Carbonda fm936 Thoughts Finished the build! Too bad winter has come a bit early and won't be able to ride till the spring now. Build specs:

- Size Large Frame; custom painted "Chrome Green"
- Shimano XT 12spd
- Shimano XT brakes
- E*thirteen XCX iW28 rims
- Bontrager XR4/XR3 tires
- RaceFace Next R cranks (170mm)
- RaceFace Next Handlebar (760mm)
- RaceFace Stem - 50mm
- OneUp Dropper (210mm)
- Giant Contact Seat
- Fox 34 SC 120mm, 44mm offset
- Fox DPS Float 42.5mm (the one everyone was buying on ebay)

The bathroom scale test (me with bike, me without bike) says 27lbs, but I sure hope that's wrong cause my spec sheet says it should be around 25lbs based on listed weights + 1lb buffer. Will have to get to a bike shop to properly weigh it. I spent about $5200 CAD on this, but did have some access to pro deals for RaceFace and Fox gear. Bought a bunch of the Shimano stuff on AliExpress a few months back before the prices started climbing.
October 23, 2020, 02:24:32 PM 		4
Re: Carbonda fm936 Thoughts
Quote from: adroitrider on November 09, 2020, 09:57:17 PM
Are you happy with sizing down? How does your build ride? Did you end up changing the stem or headset spacers to increase reach/stack?

I sized up and have no complaints.

Yeah, I'm definitely happy with the bike. I was worried it might be a bit small and I'd have to push seat back in rails or go longer stem. But the fit is fine with seat centred in the rails and a 50mm stem. The centre of the bars to seat measurement is within 5mm of my 2019 XL Commencal Meta TR, which has the same HTA, STA so it feels very similar to that bike, but weighs about 10lbs less and pedals like a hot damn! Looking forward to doing XCM with it.
November 13, 2020, 01:21:16 PM 		1
Re: Airwolf YFR068 - 2023 Gravel Frame Well my build is 90% complete. Waiting on some power meter SRAM Force cranks to finish the build. Running some loaner cranks for the time being.

Mixed feelings about this bike. The quality of the paint (see pic of example - it chipped really easily. Has happened in a few locations), issues with the headset plug (as others have noted) and misaligned brake caliper mounts were low points (normal methods for aligning brakes didn't work, needed to really play around to eliminate brake rub). Overall required excessive fiddling to get things right, in my opinion.

The bike rides well enough, but it seems noisy and the wheels I chose are probably too stiff. I can't tell if the noise is the chain/cassette combo? Open to feedback, based on my componenet selection - maybe I'm made some bad choices. Once I get final parts on it, I'll weigh it. I'm not shooting for weight weenie but I think it'll end up light as a result of all that carbon.

Here are the specs:
- SRAM Force AXS brakes and shifters
- SRAM GX AXS rear derailuer (went mullet on this build, good for where I live)
- Garabuk 10-50 cassette
- SRAM Rival cranks with 42T cassette (upgrading to SRAM Force with PM and 44T when it arrives)
- Shimano 160mm ICE-tech rotors
- SRAM GX chain (for now)
- WheelsFar Wheels. 50mm deep, 24mm internals, 30mm external width, DT350 hubs with aero Sapim spokes
- GravelKing SK 43mm tires
- 400mm handlebar and 110mm stem on 58cm frame
- Specialized Power Comp Saddle (not what's on in pic, but have since swapped it out)

Anyone else find specing and building bikes to be almost more fun than riding them?
April 17, 2024, 02:49:09 PM 		6