Chinertown

Chinese Carbon MTB => 29er => Topic started by: CrownPerformance on October 22, 2020, 11:07:19 AM

Title: ICAN P9 - Shock Options/bushings
Post by: CrownPerformance on October 22, 2020, 11:07:19 AM
Hello,

I'm looking to see if anyone has used other shocks other than the recommended 210x55 (150mm travel) on the ICAN P9 frame. I've heard 210x57 or 216x63 will work too. Can anyone confirm this and how much travel does your bike have now?

Secondly, what size shock hardwear does it use? 22x8 or 22.2x8?

Here's a pic of my 29er P9:

https://www.pinkbike.com/photo/19275640/ (https://www.pinkbike.com/photo/19275640/)
Title: Re: ICAN P9 - Shock Options/bushings
Post by: Icyseanfitz on October 24, 2020, 10:05:56 AM
What travel have you on the front out of interest? Has anyone tried to put a super high end shock like a push sixeleven on a p9? As they tend to be custom built to particular bike frames i doubt it, what main brand bikes suspension setup most closely resembles a p9?
Title: Re: ICAN P9 - Shock Options/bushings
Post by: endo.alley on October 25, 2020, 02:52:27 PM
Probably a Norco Sight of a couple of years back or Scott Genius or Ransom. Maybe Canyon Strive.
Title: Re: ICAN P9 - Shock Options/bushings
Post by: CrownPerformance on October 26, 2020, 11:30:51 AM
Quote from: Icyseanfitz on October 24, 2020, 10:05:56 AM
What travel have you on the front out of interest? Has anyone tried to put a super high end shock like a push sixeleven on a p9? As they tend to be custom built to particular bike frames i doubt it, what main brand bikes suspension setup most closely resembles a p9?

I run 160mm out front and used the fox dhx2 coil shock.
Title: Re: ICAN P9 - Shock Options/bushings
Post by: Icyseanfitz on October 27, 2020, 05:05:43 AM
Ive a 180mm lyrik ultimate, here's hope the headtube doesn't rip off :D
Title: Re: ICAN P9 - Shock Options/bushings
Post by: AV_RIDER on October 30, 2020, 09:08:27 PM
Mounting Pin Width:
22.0mm

Mounting Bolt Size:
8mm

* I'm currently running 27.5 wheels
* FOX 36 170mm, 44mm offset
* 210x55 DVO Topaz
Title: Re: ICAN P9 - Shock Options/bushings
Post by: Beaumont88 on March 12, 2021, 12:16:28 PM
Looking at getting a marzocchi bomber for the rear but i am fully purplexed at what size mounting hardware i need im reading all sorts of measurements