Chinertown
Chinese Carbon Road Bikes => Road Bike Frames, Wheels & Components => Topic started by: Thom on September 28, 2021, 05:45:05 AM
-
Hi, I like to paint my carbonda 701 gravel bike and was removing al the hardware. But ther is tis little pice on the frame for the front derailleur. Its a cable stop but I would like to remove it but could not get it out. Anybody tips for getting it out. Or knows a replacement part from a other brand. Same for were the rear derelieur cable exits the frame at the back witch nou is kind of a janky pice of rubber rolled up.
Thanks
Thom
-
Hi, I like to paint my carbonda 701 gravel bike and was removing al the hardware. But ther is tis little pice on the frame for the front derailleur. Its a cable stop but I would like to remove it but could not get it out. Anybody tips for getting it out. Or knows a replacement part from a other brand. Same for were the rear derelieur cable exits the frame at the back witch nou is kind of a janky pice of rubber rolled up.
Thanks
Thom
On the CFR505 model, there is a little screw that tighten a metal part inside, pushing against the seat tube.
It is not very visible and black, so maybe you didn't notice it.
-
No I mean not the metal part were the derelieur screws to but te little cable stop fount on the bb behind the seat tube.
-
Can you upload a photo? If its the plastic cone stopper, you can ease it out with a small flat head.
-
No I mean not the metal part were the derelieur screws to but te little cable stop fount on the bb behind the seat tube.
Yeah, that is the part I was referring to, on the back of the seat tube.
How does the 701 looks like, are you happy of what you see ?
Mind to share some pictures ? 8)