Chinertown
Other Resources => Sales & Classifieds => Topic started by: spcycle on June 16, 2022, 01:43:44 AM
-
Dear All:
Have a nice day.
New model SP-M016 29er Boost hardtail mtb frame has been tested and put into production. .
Now share some picture and information to this forum members.
Really thanks the supporting for all of you.
Any interesting and pre-order of this frame, feel free to contact us at any time.
info@lc2000.com.cn
By the way, we also accpet the customized mold production and painting job work.
For this model some inforamtion listed:
Bottom Bracket: BSA 73mm
Headset Size：Top 1-1/8 (41.8mm), Down 1-1/2(52mm)
Seatpost: 31.6mm
Rear Spacing: 148*12mm Boost
Cable : All Routing Internal
Max Tire Size: 2.4"
Weight: 1020g +/-30g(17inch)
If anyone has the advice or idea for this model, feel free to reflect to us.
Many thanks.
David
-
Similar design to the bxt mtb056 but less extreme seatstay position and a lot lighter. Geo seems very similar to the Cannondale scalpel ht which is a nice slackened xc bike. The threaded bb is a nice addition as well.
What is the recommended fork length and offset?
-
Similar design to the bxt mtb056 but less extreme seatstay position and a lot lighter. Geo seems very similar to the Cannondale scalpel ht which is a nice slackened xc bike. The threaded bb is a nice addition as well.
What is the recommended fork length and offset?
in the geo chart says 45mm offset fork
-
Similar design to the bxt mtb056 but less extreme seatstay position and a lot lighter. Geo seems very similar to the Cannondale scalpel ht which is a nice slackened xc bike. The threaded bb is a nice addition as well.
What is the recommended fork length and offset?
Hi Friend, We recommend length 505mm and offset 45mm fork, thank you
-
If you made an XL size I'd certainly be interested.
-
If you made an XL size I'd certainly be interested.
Sorry, Currently we only plan to produce 3 sizes S/M/L.
-
Dear All:
Have a nice day.
New model SP-M016 29er Boost hardtail mtb frame has been tested and put into production. .
Now share some picture and information to this forum members.
Really thanks the supporting for all of you.
Any interesting and pre-order of this frame, feel free to contact us at any time.
info@lc2000.com.cn
By the way, we also accpet the customized mold production and painting job work.
For this model some inforamtion listed:
Bottom Bracket: BSA 73mm
Headset Size：Top 1-1/8 (41.8mm), Down 1-1/2(52mm)
Seatpost: 31.6mm
Rear Spacing: 148*12mm Boost
Cable : All Routing Internal
Max Tire Size: 2.4"
Weight: 1020g +/-30g(17inch)
If anyone has the advice or idea for this model, feel free to reflect to us.
Many thanks.
David
What is the price including shipping within China? Can you give me more information on the warranty?
Thanks
-
What is the price including shipping within China? Can you give me more information on the warranty?
Thanks
Hello, For delivery within China, our price is 290usd. Including shipping cost. thank you
we stand behind our product with the following guarantees:
We offer you our high quality and customer-tested products.carbon bicycle frame comes with 2 years warranty. Under normal riding ,if there is any damage not caused by human factors,products can be replaced from us.
Details about warranty period :
* Step1 : Send email to :info@lc2000.c0m.cn telling the problem about products .
* Step2: Taking photos or video to us show the problem .
* Step3: We analyze the problem base on the pictures or video .
* Step4: Confirm the problem, give solving plan.
Notice:
>It is products’ quality problem,Spcycle pay all fees.
>Confirm it is because human caused , customer need pay all fees .
This warranty does not cover:
* Normal wear and tear, any damage caused by accident, misuse, neglect, abuse, or stunt riding (veld bashing, riding down stairs, or similar activities).
* Improper assembly or improper maintenance is not covered by warranty.
-
Similar design to the bxt mtb056 but less extreme seatstay position and a lot lighter. Geo seems very similar to the Cannondale scalpel ht which is a nice slackened xc bike. The threaded bb is a nice addition as well.
What is the recommended fork length and offset?
M016 frame high quality photo sharing
-
hi.. how much mm the rear end can be flex?
-
hi.. how much mm the rear end can be flex?
Hi, I'm so sorry, I don't understand what "rear end flex" means, can you describe it in detail? thank you
-
Dear All, Now all sizes of M016 frame are in stock, for matt black frame order, we will complete the shipment within 7 days. thank you
-
@spcycle - What is the difference in your SP-M016 model and the SP-M08? Looks similar except the geometry of the M016 is much more slackened (head angle 67 vs 70). Is that right? Can I route dropper, rear brake, and derailluer cables internally? The geo specs are assuming what size fork? What is the max chainring? What is the max rotor size that fits the rear?
This looks like it checks a lot of boxes: slacker design, bb 73mm threaded, 2.4" tires max, boost spacing. I just bought a new full suspension but looking to do a fast hardtail
-
Hi, I'm so sorry, I don't understand what "rear end flex" means, can you describe it in detail? thank you
I want to know if the rear triangle offers some comfort, if that rear offers some compliance so filter small bumps... if yes, how much mm is the carbon compliance
-
Short but interesting and light frame. It has also shorter chainstays than bxt, could be nice for progressive gravel when combined with 480mm fork and -1.7deg slackr (frame is IS42/IS52 isn't it?). @spcycle, could you post pdf for size L? Do you have drawing of chainstays? I need to check clearance.
-
I want to know if the rear triangle offers some comfort, if that rear offers some compliance so filter small bumps... if yes, how much mm is the carbon compliance
IHMO frame compliance is last thing when it comes to bump compliance: fork/shock -> tires -> seatpost/handlebar -> frame. Take a look at this video:
https://www.youtube.com/watch?v=Lb4ktAbmr_4
More important is how this frame flexes under load, but I guess there is no info about it:
https://www.youtube.com/watch?v=5f8PGpKUKro
-
I have built bike with this frame (size M) for my girlfriend in september. I think it is the best downcountry hardtail frame at this moment - good reach numbers, good saddle position, perfect headtube angle (66.0 with 120 mm fork).
(https://i.imgur.com/Y4PasKe.jpg)
I have found only two problems:
1. Chainline must be 53 mm or wider. With smaller numbers chainring is rubbing chainstay. Checked with 32, 34 and 36-teeth chainrings on M8100 crankset (52 mm) and installed M8000-B (53.4 mm) without any problems.
2. Some calipers with 160mm rotors can not be fitted into the rear stays (M6000). But I haven't any problems with M8100 and M7100 with 180 mm.
Yesterday I have recieved the same frame for me and my friends building another two bikes with this frame. Chameleon painting is awesome.
(https://i.imgur.com/YjqbU7K.jpg)
(https://i.imgur.com/taX4STy.jpg)
Looks good, I'm strongly considering this frame. Can I ask how tall is you GF? I'm 5'7, thinking the 17" (medium) should be good. Also, what do you think of the seat stay? Is this a compliance thing? It looks less strong then a straight stay.
My GF is 164 cm tall. 17" frame with 45 mm stem and 760 mm handlebar (9 degrees backsweep).
She have noticed some vertical compliance on rough surface. And I haven't noticed any stiffness problems during sprinting and pump track riding on this bike.
I will try this frame in size L soon.
What's the weight of this frame?
Does it have ZS type headset so angleset can be installed?
Frame weight is 1.106 kg.
Headset - integrated, bearings is installed directly into the frame
-
Any more thoughts on this frame? Looking at getting two, one for my daughter and one for myself.
All of the carbon frames I’ve had have been black. Thinking of going gloss white with a blue pearl or metallic finish.
-
That didn’t take long, two frames were ordered today, February 19th. One 19” frame painted in gloss pearl white and a 17” frame in matte black and matte pink. So far communication has been quick and helpful. I’ll keep the thread updated as things progress.
-
She looks rather promising in the photo - any more pictures?
-
Anyone tried to use true to size 2.6" 29er tyres (65mm width or more)? What is the clearance?
-
Hello,
Can I please get a price on a MEDIUM with Chameleon green + shipping to Australia?
also, do you have any rigid forks that you could send in the same paint scheme at the same time?
Thanks!
-
That didn’t take long, two frames were ordered today, February 19th. One 19” frame painted in gloss pearl white and a 17” frame in matte black and matte pink. So far communication has been quick and helpful. I’ll keep the thread updated as things progress.
Hey - do you have an update?
I am interested to know. Thanks.
-
I ordered this frame on June 6 and received it July 12, glossy black paint no special requirements.
Frame arrived in good shape, no damage, BB threads fine, no paint chips and headset bearings installed and working.
Bike seems to have a fair bit of lateral flex but very little up-down flex. taking on the trails for the first time tonight.
Fitting FSA Comet with 36t cog, clears frame.
SRAM Level T calipers clear rear on 160mm disk.