Chinertown
Other Resources => Component Deals & Selection => Topic started by: ENEP on January 19, 2024, 01:05:31 AM
-
Looking for headset spacers for my Yishun G095D with HB068 handelbar.https://www.yishunbike.com/product/hb068/
The handlebar seems to be using a not so common system for spacers. Spacers can be provided from Yishun for a small cost but they need 30€ for postage which is a bit hefty..
I found this handlebar which seems to be using the same spacers. Spoke with the seller about buying just the spacers and could be possible.
However communicating with the seller was difficult.. https://www.aliexpress.com/item/1005005246844345.html
Does anybody know where i can find spacers other than from yishun? Or maybe if the system is a copy of a big brand system?
-
Hi
I've seen a compatible 3d file for 3d printing of light carbon spacers that look the sames.
Can't remember the website but you lay find on Google
-
Hi
I've seen a compatible 3d file for 3d printing of light carbon spacers that look the sames.
Can't remember the website but you lay find on Google
Oh, great tip buddy! Will look in to it, would be a great solution.
Edit: think I found it https://www.printables.com/en/model/492445-lightcarbon-headset-spacer-for-integrated-cable-ro
-
Where are you located? I've got spares.
-
Where are you located? I've got spares.
Located in Sweden. Where are you located?
A friend printed one today. Will give it a try. The issue with the printed ones seem to be the “steering pins” which brake easily.
-
For the guide pins you could put a hole and find some small metal pins, easily done
-
For the guide pins you could put a hole and find some small metal pins, easily done
Good one! Think I might have a piece of chain left over, will push out the pins and see if they might do the trick.