Chinertown

Chinese Carbon Road Bikes => Cyclocross Frames, Wheels & Components => Topic started by: atlet on September 16, 2024, 02:30:49 PM

Title: Velobuild GF-002 convert to normal handlebar
Post by: atlet on September 16, 2024, 02:30:49 PM

I have a Velobuild GF-002 frame and I would like to convert from integrated handlebar to normal. I need a headset cover that has holes for wires, but I can't find appropriate one. Did somebody do the conversion? What "adapter" I need?

Photo attached, what I need.
(https://imgur.com/a/TnJNoOR)

Tnx

Title: Re: Velobuild GF-002 convert to normal handlebar
Post by: kisuke3 on September 18, 2024, 01:08:29 AM

I used the FIRST Components C522 headset. If your groupset is Di2, I would suggest the C522A-3, and if your groupset is mechanical, I would suggest the C522A or C522A-1.

https://www.firstcomponents.com/headsets/internal-cable-routing/

Title: Re: Velobuild GF-002 convert to normal handlebar
Post by: atlet on September 18, 2024, 05:05:11 AM

tnx @kisuke3

I created and printed an adapter. Now is ok. :)

Title: Re: Velobuild GF-002 convert to normal handlebar
Post by: coffeebreak on September 18, 2024, 12:11:28 PM

Well done! Is that matte finish? I have GF002 in same color but in gloss.

Title: Re: Velobuild GF-002 convert to normal handlebar
Post by: atlet on September 18, 2024, 01:08:13 PM

@coffeebreak yes, mate finish.