Likes received

Profile Info

See likes

See likes given/taken

Your posts liked by others

Pages: [1]

Post info	No. of Likes
Re: Velobuild VB-R-168 Frame Hi all! I have been lurking this thread for the past few months while deciding if I should go ahead with building my own bike, and whether to get it from Velobuild. Really helpful tips so far and definitely helped with my decision to make the purchase! I finally decided order a VB-R-168 from Chris, in Matte Chameleon Green colour. I thought it would be useful to share my experience and two-cents on the bike building process. It was one rewarding experience to finally be out riding on your self-build bike! Size: 52 Groupset: Ultegra R8000 Hydraulic Disc: RT800 140mm Front and Rear Handlebar: 400mm/90mm Wheelset: From Taobao 60mm Depth with Hubsmith hubs Tires: GP5000 TL Saddle: AliExpress power saddle lookalike Pedals: AliExpress Lollipop pedals Weight: 8.2+Kg there about The building of the bike was not too difficult, just gotta do research and watch youtube for bike building process, tips and tricks, note the torque settings of the various components. The most tedious of all would be the internal routing. I routed the cables through the handlebars first, followed by the rest of the routing through the frame. Used an old brake wire to help with the guiding of cables through the respective cable holes. The FD cable stop was some what tricky, I had to file off the edges to get the cable to fit in to the hole. There is a small bracket to secure the FD cable stop into, it is rather flimsy and mine broke off. I had to fit it back into the frame from the bottom bracket hole, and screw the cable stop into the bracket. (sorry i didnt have pictures to explain it better). Another problem I had was that the headset compression ring not being able to sit squarely into the bearing, I had to squeeze the compression ring inwards a little (with a lil force) for it to sit properly into the bearing. Otherwise there would be large gap between the headset spacer and frame. Otherwise, rest of the installation was rather smooth! This is my first full carbon bike with deep wheels, so I cant exactly do any comparison. In general the bike rides really well, with much better handling, and maintains speed better. Overall very happy with the whole build! October 18, 2021, 09:10:54 AM	15
Re: Velobuild VB-R-168 Frame Quote from: curvenut on October 19, 2021, 11:27:04 AM Really nice build ! What are the wheels ? The wheels are from this Chinese seller on Taobao, Timibike. They are able to customise various combinations, went with them as they were the only few offering the hubsmith hubs (really loud hubs) so far they are rather smooth. Can't attest to its logetivity yet. The wheels arent that lightweight weighing in at about 1720g including rim tapes. Cost was about USD 510 shipped. October 19, 2021, 11:04:31 PM	1

Post info

No. of Likes

Re: Velobuild VB-R-168 Frame Hi all! I have been lurking this thread for the past few months while deciding if I should go ahead with building my own bike, and whether to get it from Velobuild. Really helpful tips so far and definitely helped with my decision to make the purchase! I finally decided order a VB-R-168 from Chris, in Matte Chameleon Green colour. I thought it would be useful to share my experience and two-cents on the bike building process. It was one rewarding experience to finally be out riding on your self-build bike!

Size: 52
Groupset: Ultegra R8000 Hydraulic
Disc: RT800 140mm Front and Rear
Handlebar: 400mm/90mm
Wheelset: From Taobao 60mm Depth with Hubsmith hubs
Tires: GP5000 TL
Saddle: AliExpress power saddle lookalike
Pedals: AliExpress Lollipop pedals

Weight: 8.2+Kg there about

The building of the bike was not too difficult, just gotta do research and watch youtube for bike building process, tips and tricks, note the torque settings of the various components. The most tedious of all would be the internal routing. I routed the cables through the handlebars first, followed by the rest of the routing through the frame. Used an old brake wire to help with the guiding of cables through the respective cable holes.
The FD cable stop was some what tricky, I had to file off the edges to get the cable to fit in to the hole. There is a small bracket to secure the FD cable stop into, it is rather flimsy and mine broke off. I had to fit it back into the frame from the bottom bracket hole, and screw the cable stop into the bracket. (sorry i didnt have pictures to explain it better).

Another problem I had was that the headset compression ring not being able to sit squarely into the bearing, I had to squeeze the compression ring inwards a little (with a lil force) for it to sit properly into the bearing. Otherwise there would be large gap between the headset spacer and frame.

Otherwise, rest of the installation was rather smooth!

This is my first full carbon bike with deep wheels, so I cant exactly do any comparison. In general the bike rides really well, with much better handling, and maintains speed better. Overall very happy with the whole build!

October 18, 2021, 09:10:54 AM

Re: Velobuild VB-R-168 Frame

Quote from: curvenut on October 19, 2021, 11:27:04 AM

Really nice build !
What are the wheels ?

The wheels are from this Chinese seller on Taobao, Timibike. They are able to customise various combinations, went with them as they were the only few offering the hubsmith hubs (really loud hubs) so far they are rather smooth. Can't attest to its logetivity yet.
The wheels arent that lightweight weighing in at about 1720g including rim tapes. Cost was about USD 510 shipped.
October 19, 2021, 11:04:31 PM

News:

See likes

Your posts liked by others