See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: LTWOO eGR I have my 2017 Giant TCX switched over from R8000 Ultegra with the clutched RX800 RD to the eGR group. My cranks are GXP so running 42t paired with a Sunshine 12s 11-46 and a SRAM NX Eagle 12s chain (for now until the KMC x12 chains arrive). I originally purchased 12s Shimano chains but the inner width is too tight for the SRAM narrow wide chainring. The chainring is 11s but works fine with the 12 chain.

It's all setup and dialed in nicely. I have R8070 Di2 on my Madone and the shifting is as precise IMO.

I did use some 8 mm heat shrink tube to cover the cable connector to help avoid water ingress. If using a heat gun be cautious, the cable itself can easily overheat and get soft.

The point I wanted to let everyone know is that I would suggest checking the 3 T10 screws that face towards the floor. During my setup one fell to the floor. I added some blue thread locker and snugged all three. Unsure of a torque spec but the seems like they would strip threads easy so take it easy if you do this.
July 01, 2024, 08:25:19 AM 		3
Re: LTWOO eGR See attached for screws to check.
July 01, 2024, 06:22:13 PM 		2