See likes

See likes given/taken


Posts you liked

Pages: 1 ... 3 4 [5] 6 7 ... 22
Post info No. of Likes
Re: Which chains is everyone using? For me a mix of different manufacturers:
Original Shimano 12 speed that came with new 105 Di2 / Set included the Dura Ace chain for some reason... sometimes you get lucky  ;)
YBN - So far the best experience also looking at the quick links but can be pricy at times
SUMC - For cheaper builds and commuter bikes

The Chain is one side of the equation, lube is the other important topic for me:
- Changed all bikes to wax based drip solution
- Proper removal of factory lube is most important: 1. Clean in white spirit 2. Citrus chain degreaser 3. Rinse with water 4. Dry completely 5. Apply drip wax
- Used Squirt first with decent results
- Changed lately to Mariposa drip wax which is more resistant and quieter during use:
https://www.effettomariposa.eu/products/flowerpower-wax-bicycle-chain-lube

To be honest the hot wax method may be better, but too complicated and time consuming...

BR Chris
June 25, 2023, 09:04:42 AM 		1
Re: Yoeleo R12 & SAT C50 PRO Wheels - Revamped and Refreshed Build is complete. Video soon to follow.

-Yoeleo R12 ‘23 size 56
-Ultegra Di2 12 Speed
-Yoeleo C50 Pro Wheels
-FSA/Vision Trimax Aero Bars (38cm)
-SWorks Power Carbon Saddle
-PowerTap/SRAM P2 Pedals
-Supacaz Bar Tape
-Continental GP5000 28
-Weight 7.8kg (w/o pedals, cages, computer)
June 25, 2023, 09:49:40 AM 		1
Re: Chinese cycling clothes  :-\ although i pretty much liked the quality of Spexcel.. I can't recommend ordering there anymore.


I ordered 2 thermal Jerseys  in XS. I do already possess one thermal jersey in XS, and a XL one is also here. The new ordered XS were supposed to be a little tighter than the one I already have.

One XS jersey was much too large. The XL jersey is the same model, so I just measured the lengths of both and looked it up in the sizing chart.. the XL was perfectly fitting the chart measurements whereas the "XS" corresponded to M instead.
Putting all 3 thermal jerseys together I could also see, that the pseudo XS was just in the middle between XS and XL.. so: M
I guess the label had been ironed in just wrong. Mistakes can happen. I got into contact with the seller to solve the issue. He ir she just refused everything and blamed me to be stupid.
I opened a dispute.. and Ali believed me more than Spexcel.

The second jersey that i ordered in XS is in fact XS (hooray) but the sewing quality is bad. Along the seams the needles created little holes in the fabric. These holes will get larger..I know this problem, it can happen because of wrong needles in the serger or to blunt / or to sharp needles.


Although the stuff i have currently (besides the jacket with the holes) is nice , I won't order again at Spexcel. It's just not worthy to have a roulette game regarding sizes. And then there was the bad reaction from the seller also. Mistakes happen.. but if they happen and the reaction is like this...
I can spend my money somewhere else!
June 27, 2023, 06:51:39 PM 		1
Re: Chinese cycling clothes
Quote from: sbellote on June 27, 2023, 07:29:41 PM
I think I already shared here my experience with Spexcel, but somewhat similar...

got a jersey which was an XS instead of an 'S' according to size table, managed to get refund but the seller communication was no good. I ended up getting 2 other jerseys from them, which I got a very nice price and decided to take the risk, those were very good and size according to table
but the times I tried to talk with the seller about products, clear doubts about details, it's not good (and not only language barrier, like I get with most stores on AliEx)

so the feeling is the same, I prefer to spend my money somewhere else

Well yes I had the feeling that the person on the other side had no language issues. He or she was just really rude.
They must have a quality problem in the labelling step .. if you had the same issue,  wrongly labelled.

The sad story...I really wanted this jacket  :'(. I didn't want it for free and also I didn't want to have something that is pretty much too large to wear. I really like my first jacket,  it's a great fabric.I wanted to have a second one  :o
But since the seller doesn't allow me to buy again... and basically I agree because I don't like to order in a roulette style, I must look for something else.  :(
Thermal jacket ... wind shielding, very thin fabric,  "pearly" appearance with "satin" shine and on the inner side thermal fleece.
June 28, 2023, 02:49:17 AM 		1
Re: Speeder SC-R48 So I've finally completed the build of the frame I bought from @trilobites

I'm switching from a Factor o2 2018 RB with 8050 Di2 and so far after a few hundred k's the main difference is the stiffness in between both frame's rear triangle has the o2 was much more lively and felt alive when climbing out of the saddle however it looks like the power delivery is a bit better on the speeder.

I will report back after a month or two on the bike for a clear review.

Speeder SC-R48D 490
Sram AXS Rival RD/Force FD/Rival Shifters
Ali Shimano 12 Speed 11/32 cassette & Chain
Shimano R8000 52/36 crankset
Speeder 45mm wheels with Chosen Hub - 1460G with Tape.
Prologo Dimension NDR Nack / Elita One Seatpost
Fasterway 380mm aero handlebars
Kalloy Uno 100mm
Favero Assioma
July 03, 2023, 11:11:43 PM 		1
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc! It looks like there's a new budget option for carbon 3D saddles from Ryet/Lexon. I have the previous version on 2 of my bikes, but I'm curious if this new one is better? I've been quite happy with the previous version mainly due to the robust construction.

https://www.aliexpress.us/item/3256805657168196.html
July 30, 2023, 01:27:20 PM 		1
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
Quote from: 00Garza on July 30, 2023, 07:49:36 PM
I've seen a few frighteningly cheap 3d printed saddles. They don't look great, and they're listed by stores that have been opened in the last few months. Not confidence inspiring.

https://www.aliexpress.us/item/3256805676326754.html

https://www.aliexpress.us/item/3256805589725092.html

That second one is straight up injection molded totally not 3d printed. Same as the other 14 buck saddle.

I would get the one trace velo uses. That one is proven at least.  Then again I am using a super cheap saddle. I dont know if I like it or not.
July 30, 2023, 11:46:41 PM 		1
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc! 3D printed saddles are definitely dropping in price. The Sensah factory store has some lower priced options. I've had good luck with fast shipping from them as well.

https://www.aliexpress.us/item/3256805621753442.html
August 02, 2023, 12:01:00 PM 		1
SPCycle SP-R025-SL Hi,
anyone have bought this frame?
https://www.sp-cycle.com/spcycle-2023-new-toray-t1100-carbon-road-bike-frame-disc-brake-lightweight-racing-bicycle-carbon-frameset-p4786474.html

seems nice but i cant find any real photo
August 04, 2023, 11:06:47 AM 		1
Re: Hygge Aero Carbon Frame Today from their FB page. Dang that looks good.
August 07, 2023, 09:13:23 AM 		1