Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: VeloBuild VB-R-268 frame
Thanks Serge, you answered everything I had and probably every follow up question i had to boot also Sounds like a nice build! Just ordered two frames. Have bought EliteWheels Edge Ultralight 50 mm (21 mm internal, 28 mm external) from AliExpress for one of the frames and actually bought their Edge Gravel 45 mm wheel set (462 USD with discount code when I ordered) for the other frame as their dimensions regarding internal (24 mm) and external width (31 mm) rim width is more progressive and comparable to ENVE SES 4.5 (25/32 mm) and Reserve 40/44 (25/33-31 mm). Will pair both with GP 5000 28 mm. They will probably measure up around 30 mm on the gravel wheel set. Expecting to set both bikes up with 105 Di2 as the compared prices of the ERX/ER9 is not that much lower when shipped to my country (Denmark) with taxes - when you add the cost of crankset, chain, cassette and rotors. April 04, 2024, 12:39:21 AM |
1 |
|
Re: Velobuild VB-R-218
I didn't try yet how low I could go. I just assembled it and holds since. Look, no need to panic. It's a 550 € china frame. It's about fun. And velobuild respect their warranty actually. Do some measures, stay easy with the torque and chances are good you'll be fine. April 08, 2024, 02:39:49 PM |
1 |
|
Re: Velobuild VB-R-218
I'm testing this, you guys might be interested in that one if VB stops selling the 218. The clamping system is normal. The geometry is virtually the same as the Grevil, so it's a gravel bike, but very roady. I havent ridden it much, but it's been great fun.
April 08, 2024, 03:21:23 PM |
1 |
|
Re: Velobuild VB-R-168 Frame -build finally complete!
Had to dig for this thread in the deep, with all the new banter about VBR-268, this poor little thread is getting forgotten.
April 16, 2024, 06:23:26 AM |
1 |
|
Re: VeloBuild VB-R-268 frame
First impression video is live. My VeloBuild 268 Is FINISHED - First Ride Impressions https://youtu.be/-we6CsAEaQY?si=f13auTeXKcUV-wwR Also, I've had some problems with random creaking. Initially I thought it was the saddle rail clamp. Then the cables being routed into the headset. And finally the bottom bracket. Nope. It was the seatpost clamp. I torqued the clamp a little more than I usually do (7nm instead of 5nm) and it was still creaking. A lot. The solution was adding a bit of electrical tape around seat post clamp where the clamp seats into the frame, and adding another strip of tape along the area of the seatpost that contacts the clamp. Problem solved. April 16, 2024, 09:44:20 AM |
1 |
Re: VeloBuild VB-R-268 frame
In your Video you said, that there is a significant difference between this frame and a higher priced frame. There is no standardization in testing here. He compares bike ABC with different groupsets, bars, and wheels (incl tyres type, size, wheel depth, spoke type) plus a whole bunch of variables with what looks to be minimal testing time (first impressions). Unless someone sets up bikes with exactly the same components and A/B tests them back to back in set conditions, then isolating and commenting on the frame's "performance" would be mighty difficult. The observations on geometry, customer service, and finishing are useful, however. The bike seems really nice, and it is good to see Velo has been working on their customer service. I was really impressed with the presale on my order; every question was answered in a friendly and timely manner. Having dealt with many in the past (Ican, Light, Yishun etc) this is the best I have seen any of them do in presales bar Yoleo) So far so good. April 16, 2024, 12:05:13 PM |
1 |
|
Re: VeloBuild VB-R-268 frame
Build done, except for missing bar tape. Er9, Magene p505, edge 45mm. Size 58 comes at 8.05 kg as you see it on the picture. Test ride is next.
April 16, 2024, 03:19:40 PM |
1 |
Re: VeloBuild VB-R-268 frame
There is no standardization in testing here. He compares bike ABC with different groupsets, bars, and wheels (incl tyres type, size, wheel depth, spoke type) plus a whole bunch of variables with what looks to be minimal testing time (first impressions). Unless someone sets up bikes with exactly the same components and A/B tests them back to back in set conditions, then isolating and commenting on the frame's "performance" would be mighty difficult. Correct. First impression video and then long-term video per usual. Even if I were to conduct standardized test, I would get called out for doing "bro science" as other YouTuber's have. Thankfully the support of this very forum over the years is what allows me to continue and make content. I'm very grateful. April 16, 2024, 03:38:18 PM |
1 |
|
Re: Velobuild VB-R-168 Frame
Thanks. I had it ordered before the 268 was released. Had I known… the 4 hoses went through fine. A bit of work but doable. Also routing through the integrated cockpit was a bit of work but again very doable.
April 16, 2024, 08:09:45 PM |
1 |
Re: VeloBuild VB-R-268 frame
Build done, except for missing bar tape. Er9, Magene p505, edge 45mm. Size 58 comes at 8.05 kg as you see it on the picture. Test ride is next. What a beauty, really gorgeous looking bike. How was mounting the calipers? Well faced? Also gone er9 on mine, you use the included adapters or did you need to buy a separate set? April 16, 2024, 08:19:21 PM |
1 |
Will go with the ER9 and the 268.