See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: VB-R-168 Build- A sceptic's experience I just received my VB (separate) stem and bars. These will replace the integrated bars that are currently on the bike. First impressions are that they are stiffer than the integrated bars. I will update with pics/thoughts once I get this combo installed (which requires re-routing cables through small bar spaces ::))
November 12, 2021, 02:20:37 PM
1
Re: Velobuild VB-R-168 Frame
I actually took off the stem so am confident there was no force compressing the steerer.

At first I just wanted to switch to something "safer", however now it's more out of necessity as the stock expander is not gripping well internally and slipping up when I compress the headset (using carbon paste as well).

I used one of these in my VB-R099 - Quite a tight fit (Needed to tap it with a rubber mallet to get it in) but it works very well:

https://dedaelementi.com/expander-70

If I remember rightly, it was lighter than the stock plug, despite being considerably longer.

February 03, 2022, 10:33:28 AM
1