See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Frame with clearance for 46T chainring I run a 46T 1X on the Tideace Noah with a Magene P505 base. I use a small spacer just to give a little more space from the chainstay.
November 16, 2024, 04:14:30 PM 		1
Re: Frame with clearance for 46T chainring I ride a 46T on my Carbonda 505, a gravel that becomes a road bike by just changing the tires
November 23, 2024, 08:02:16 AM 		1
Re: Tideace NEW Gravel Frame: GR201 Frame is out for delivery  :)




Quote from: Jouke Bosma on November 29, 2024, 05:59:11 AM
Ok ordered the frame today.

Specs:

Tideace Noah custom paint (58)(pearl white 61 with black 63)
Wheels Reynolds ATR
 HB 008 handlebar
Sram red XLPR groupset (from excisting
Fizik 3d saddle
SPECIALIZED pathfinder Pro 42mm tyres

Excited to build this bike. Soon another Tideace Noah in Holland.

I'm gonna sell my Grizl CF SLX 8 suspension frame. So if you are interested
December 14, 2024, 04:46:46 AM 		1
Re: Frame with clearance for 46T chainring Running 46T on a SPcycle G056
December 14, 2024, 06:20:49 AM 		1
Re: Frame with clearance for 46T chainring Running a 50t on the spcycle G069. Plenty of room....
December 17, 2024, 07:23:55 AM 		1
Re: Tideace NEW Gravel Frame: GR201 Welcome to the club. I ended up changing the bar against one from Speeder Cycling.

You have several options:
a) I assume you are using the black c ring delivered with the handlebar. You can change it against the silver one delivered with the frame. That fixes the moving fork as it compresses also from the front. But you will end up in a large gap between headset and top cap. You can either sand down the top cap or (as I did for another frame) glue on a round piece of universal rubber seal under the top cap to close the gap.

b) The FSA ACR 55R headset sits nice in this frame. No gap between top cap and headtube. Also the top cap follows the form of the headtube. The only issue is that every Chinese handlebar uses its own style of spacer/nut combination. So you need a transition spacer from FSA ACR to the tideace ones (3d printed or you have to glue an FSA spacer and a tideace together).

c) Buy a new handlebar with better quality :-)
February 14, 2025, 01:03:16 AM 		1
Re: Tideace NEW Gravel Frame: GR201 I have just talked to Eddy about the handlebar issues. He was not fully aware of general problems yet, since he did not receive a lot of negative feedback from customers. I think it would be good, to report back to Tideace so that they can offer a better solution in the future.


February 14, 2025, 02:25:12 AM 		1
Re: Tideace NEW Gravel Frame: GR201 I have the same 1mm gap
March 01, 2025, 08:52:20 AM 		1
Re: Tideace NEW Gravel Frame: GR201  I remove those dots with a craft knife. Have done this on the few builds with 3rd party bars, they're not really necessary just help to line everything up.
March 03, 2025, 02:43:49 AM 		1