See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Tideace NEW Gravel Frame: GR201
Quote from: Sand101 on July 22, 2024, 07:53:44 PM
Paint looks great.  When you do your buildup I'd love to see clearance of the crank on the non drive side (mentioned it above) for a crank PM.  Also, what is the steerer tube diameter?  I was told 52mm, which is definitely not it.

The thru axle hole being large isn't a good thing.  That should be a pretty tight tolerance hole.  What diameter is the hole?

I'll try to answer all of your questions later today. The steerer tube is standard 28.6.

There's a short video attached to this post of the complete build minus chain. Full weight including pedals, garmin, etc 8.6kg which I think is very reasonable. 8.4kg with chain, without pedals and garmin.

Full build list:
  • Tideace Noah custom paint
  • Wheels from Peter (search forum). Custom spec - 24mm internal hooked wavy rims, pillar wing spokes, ratchet style hub
  • Lexon UNOX gravel handlebar
  • Magene P505 power meter spider/cranks (167.5mm)
  • Alugear narrow/wide chainring (46T)
  • LTWOO e-gr groupset
  • ZTTO 11-50T cassette
  • ZTTO T47 BB
  • RYET ultralight saddle
  • Panaracer gravelking 43mm tyres
July 23, 2024, 03:47:16 AM 		1
Re: Spcycle New Mold G056 Carbon Gravel Frame It's a bit difficult to answer without clear references to items in your pictures, but ill give it a go.

Additionally i couldn't figure out the following:
- what are the two metal rings for, that came with the headset bearings?
* shims i would assume, if you have problems with binding betweend the headset and the frame, add spacers :)
- What is the strange toothshape o-ring for that came with the headset spacers?
* If you are refering to the smaller object in picture with the scale? that's the wedge that fits beween the upper bearing and the steerer tube.
- what are the additional parts with the bb for? My Lingmai does not have these?
* Shims/spacers once again + reducer and wawy washer for SRAM/GXP stuff?
November 12, 2024, 09:11:22 AM 		1
Re: Spcycle New Mold G056 Carbon Gravel Frame Thanks! That’s size M purchased from surprisedstore
December 08, 2024, 06:04:19 AM 		1
Re: Spcycle New Mold G056 Carbon Gravel Frame Last night I was having a bit of a panic, because my other wheelset front wheel wasn't fitting. I thought there was an alignment issue due to being a 15x100 front wheel with a 12mm adapter, but I opted to sleep on it and tackle it first thing in the morning. Luckily I was able to solve the problem and get the thru axle inserted into the fork! It just needed a bit of cleaning and a little TLC! Anyways, now it's time to tackle some heavier duty trails on this setup!
December 23, 2024, 11:34:13 AM 		1