Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
https://www.seraphbikes.com/Superlight-Disc-Road-Bike-Frame-TT-X68-BSA-Bottom-Bracket-Max-Tire-70028C-With-Integrated-Handlebar-p5836624.html A far better alternative than buying a bottom bracket exploding fake SL8 in my opinion. Identical geometry of course. Maybe I should get one to compare to my actual Tarmac SL8 Seraph is the "brand" counterpart to Tantan if I'm not mistaken... EDIT: Even the geometry chart is using a photo of a frame with an SL7 Tarmac stem and spacers  October 23, 2024, 08:29:27 AM |
1 |
|
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
I've built two road frames up from TanTan/Seraph. Both were loosely inspired off western brands (Scott Foil and Trek Madone) but not identical in geometry. Very solid given the price. I also a TanTan/Tideace GR201 gravel frame on order. This particular X-68 is conflicting. TanTan is a legitimate brand/factory/whatever and they make reputable products. This is this the first time I've seen them release a product to be straight up clone. Not similar in design or "inspired" like their X-34 and X-38. Actual one to one. From the saddle clamp to the Roval handlebars. I just hope these frames aren't being supplied to the overwhelming number of fake sellers on AliX October 23, 2024, 08:53:58 AM |
1 |
|
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
I’m excited to share that I’ve officially commissioned the TT-X68 as a "Full Build"! After thorough consideration and planning, I decided to go with Tantan. As per the timeline provided, the full build will take approximately 25-30 working days to complete. Following that, there will be an additional 10-15 days for shipping, so I anticipate its arrival in mid-end January. I’ll keep you all updated on the progress and, of course, will share pictures and initial impressions once it arrives. If interested. November 26, 2024, 09:33:37 AM |
1 |
|
ICAN FL1
i've bought a ICAN FL1, so i wanna start a new post and share my new build will be size 54 and hope to receive it before christmas Crystal send me some pics today, i've choose a paintless matte finish. the calipers mounts seems to be faced and the inside of the frame looks clean this frame will be assembled with:
December 04, 2024, 01:51:10 AM |
1 |
|
TanTan/Seraph TT-X69 - The Real SuperSix EVO Clone? Alternative to LC017-D?
Not much info as of right now. And TanTan's website is currently down. They seems to be on a roll with their latest clones. Thankfully this "interpolation" of the SuperSix EVO doesn't have bus like aerodynamics. https://www.instagram.com/p/DDMKHifu9q_/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== YouTube: TT-X69 New https://youtu.be/W0N2F6Cz9xQ?si=QAXM0y3aPlRExVaJ December 05, 2024, 09:35:39 AM |
1 |
Re: ICAN FL1
Me too, still considering Onirii One, or One pro and Ican FL1. The lightest frame from Elves so Vanyar in my size weight...1160 g That Onirii One pro looks extremely similar to the New Spcycle R088, but with a different fork and double the price. I'm 99% sure it's the same frame at a healthy markup. December 06, 2024, 09:51:31 AM |
1 |
|
Cervelo R5 "tribute"- Tan Tan FM639 build
I still hate how we deal with photos here.... Anyways here is my first disc build.... Current weight- 7.05kg minus computer Frame/fork- Tantan FM/FK639 (Cervelo R5 clone- tentative name = "Vega C5") - 950g 54cm frame, fork was 380g uncut, bike shop cut it. Chameleon paint; I can find code if people want. I'm pretty sure Tantan used my frame for photos. Shifters/calipers/RD = Shimano Ultegra R8020 Handlebar- Tavelo Avro 380 x 130 - 347g Seat- Ryet - 120g Seatpost- Elita One 350mm Wheels- GOZONE 45x30mm carbon spoke- 592/695g F/R Tires- Conti GP5K TT 30mm, I want to say they measured at 250g/piece Tubes- Ridenow TPU 24g Rotors- Aliexpress stuff out of a drawer, 100g/piece + 6 bolt to centerlock adapters Crankset- Quarq DZERO 170mm Chainrings- Extralite 50/34 Bottlecages- AE XXX ripoffs, 15g each I think Computer mount- Tavelo OEM, didn't measure Had some mishaps on the first ride.... didn't tighten the saddle clamp and it came off on the first ride. Crank/BB had a 4mm gap so I had to 3D print some spacers. Other than that I really like it. Feels mostly similar to my old FM208, though the wider tires/lower pressure are more comfy. Tavelo Avro stem length is ~10mm longer than conventional and I didn't account for the 0 degree stem angle so the fit is longer/lower.... I like it though. Only remaining parts are some weight weenie stuff.... ~60g rotors and ditching the 50/34 Extralite for a single 48T narrow-wide to run 1x. So far I really like it; need to take some nice photos as it's a beautiful bike. Good mix of modern stuff with a classic frame. I am waiting for the Chinese to get on board with the aero front/WW rear, I don't see the point of ~50mm deep seat tubes. Anyways better photos coming soon December 10, 2024, 02:59:43 PM |
1 |
|
Re: New Adapt Aero-Allrounder
Yes, but speeder goes direct to customer, and they sell a lot of frames from adapt. Pricing i got in september (shipping to EU): SC-R49D frame + fork + seatpost: US€609.76 ($640)/set SC-RH02 handlebar / stem: US€142.91 ($150)/pcs Thru axles: US€19.05 ($20)/set NO.55R headset: US€28.58 ($30)/set 50mm rims + Powerway CT43 hubs + Pillar PSR AERO 1423 spokes: US€371.57 ($390)/set SC-BC03 bottle cages: US€11.43 ($12)/pcs Shipping cost for frameset: US€114.33 ($120) (tax-free) Shipping cost for wheelset: US€85.75 ($90) (tax-free) I also asked if they have any association to Tavelo or Adapt but he just ignored these questions and gave me these prices (prices are USD but a chrome extension placed Euros next to it) December 16, 2024, 05:56:56 AM |
1 |
Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
Lo and behold, the frameset finally arrived and is waiting for bike fitting before further installation of the parts missing in the picture. I inspected the frame and noticed no visible damage inside or out. The white decal is slightly raised from the paint, which indicates there is a layer of clear coat and the paint is not brushed to a glossy effect as suspected few pages earlier. The lighting is not the best, but you get the greater picture ...  FYI: The frame was shipped on 22 November and was delivered by DHL to Slovenia, EU on 10 December. December 16, 2024, 08:05:23 AM |
1 |
Re: Spcycle New Mold SP-R088 Carbon Road Frame
I’m definitely intrigued by this frameset but unable to find reviews anywhere. Anyone on here purchased this yet? My R088 just got painted and they sent pictures already. I went with a simple UD gloss finish over bare carbon. Frame was weighed without metal hardware (the UDH and FD hanger) and my size 52cm frameset came in at 760g. I'll report back once my frame arrives hopefully within the next few weeks. December 20, 2024, 11:03:00 AM |
1 |
The issue with the Onirii is that I have 187 cm, and I'm on the edge with that 56 frame! I checked the bikegeocalc.com and it should be okay, but I have some doubts. The Ican looks very nice, rather good opinions and there are quick. However, the One Pro is looking much better, but for sure will be heavier.