Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: TT/Tri groupset options?
You'd need charger and batteries too. I bought 2nd party batteries and charger for much cheaper than original price. Overall conversion to: thanks for this could you link the battery and charger option for above? please and thanks this is why CT is a great forum. might even buy the new ICAN TT frame in future as it ticks all the boxes for me. https://www.icanbikes.com/Products-list/carbon-tt-bike-frame/ non uci though! unless it looks like another UCI approved frame etc  February 25, 2025, 06:27:37 AM |
1 |
|
Re: ICAN TT017 TT Bike Build
So the bike has now been assembled. I still need to adjust it to suit me but its pretty close at the moment. The adjustment on the seat seems to be quite far back. I like the end of my seat in line with the crank and this is right at the end of adjustment. My other Cervelo P3 and Giant Trinity were much further forward. Maybe a different seat could give more adjustment. The set clamp looks to be identical to the Cervelo P3 clamp The plate at the top of the riser looks proprietary. I have had a quick look for the riser/spacers but cant find anything even on ICAN's website and AliExpress. If you want to add different aero bars you will either need to use the existing plate or try to make one that fits. The risers have like a male and female end that interlock with the base bar and the top plate or angle riser. This gives them stability and is very solid which you want for the riser and aero bars. All cables are routed in the riser and down through the stem inside the bearings. I had to cut the fork stem when assembling the bike. Next time I would ask ICAN to do this, there is no reason why they cant as you don't adjust the bar height, its in line with the top tube. April 06, 2025, 07:55:52 PM |
1 |
|
Re: ICAN TT017 TT Bike Build
Assembly drawing and Handlebar drawing attached for more info on how it goes together. My next task is to add some storage to this bike. I will have a BTA (between the arms) bottle holder on the front end either 1 or 2 bottles if I can find something and use a holder behind the seat. In the V at the bottom bracket I was looking to find something that fits to use as a storage box or get one 3d printed. Better still would be one that attached to the seat post and seat post down tube. Im not sure if there are any out there that fits or if I can get one 3D printed. I will see what my chances are of a CAD drawing from ICAN. I have edited my post above about no Torque settings. ICAN have now supplied a drawing with this info. April 07, 2025, 09:38:11 PM |
1 |