See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Elite Wheels - Hubs Question & Tubeless vs Clincher
Quote from: Jbegs on October 19, 2021, 03:27:51 PM
Has nothing to do with the tire staying inflated. Its more to do with the benefits of a tubeless system vs Clincher in a road application. I also said it depends what your using it for.
Having almost no flats, and lower pressure for comfort are worth the small effort even for pure road riding.
Everybody could try a pair of tubeless tires once, use them until they die or being fed up, and make their own idea of it, instead of reading forums  ;)
In any case if you are shopping for new rims, take tubeless and get both options.
October 20, 2021, 03:37:02 AM 		1
Re: Carbonda fm936 Thoughts
Quote from: Jbegs on October 25, 2021, 10:24:19 AM
Has anyone bent there upper shock mount? I did a search but could find anyone mentioning that. Its very slight so I'm hoping its just a bolt quality issue. All the other bolts in the linkage were torqued properly and no play at the bushing.

If anyone has I could use a link to what you replaced it with.
Thank you

Yes, I also bent a little, I bought a new bolt on aliexpress and everything became fine. Unfortunately the original carbonda bolts are not of very good quality

this bolt, lenght 40mm https://aliexpress.ru/item/32346297012.html?spm=a2g39.orderlist.0.0.626d4aa6Epw2fK&_ga=2.238546816.1248168000.1635175814-2025224587.1629912215&_gac=1.48907732.1633550633.CjwKCAjwkvWKBhB4EiwA-GHjFh1f2ima6Yzra606rzp_VI4RPxiWXupqcG65UfpDAKXqSkqe_XHaIBoCtIkQAvD_BwE
October 25, 2021, 10:29:27 AM 		1
Re: Carbonda fm936 Thoughts Yes, there is a quality issue with that bolt. I know several FM936 riders whose upper shock bolts were bent, including myself.
Replaced it with this one (40 mm).
October 25, 2021, 12:32:05 PM 		1