Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: Gravel frame with UDH hanger - T-Type compatibility.
Hello. Have you read this article? It discussed UDH SRAM chainline. https://www.wolftoothcomponents.com/pages/how-to-find-the-correct-chainring-for-your-mountain-bike-with-sram-transmission December 10, 2023, 10:55:21 AM |
1 |
Re: Gravel frame with UDH hanger - T-Type compatibility.
Nope but I find it quite useful. Thanks mate. Ask Carbonda, I think the 505SL has Udh. In another forum someone also reported about a 707 with Udh. December 10, 2023, 11:42:11 AM |
1 |
Re: Gravel frame with UDH hanger - T-Type compatibility.
Nope but I find it quite useful. Thanks mate. I made a custom titanium one with an udh hanger to test in the future the new derailleurs from SRAM, but for now I was planning to use it with the old GX AXS non-T. December 10, 2023, 12:37:48 PM |
1 |
|
Re: Gravel frame with UDH hanger - T-Type compatibility.
New Yishun frame https://www.yishunbike.com/product/g055-d-adventure-gravel/ And Lightcarbon https://www.lightcarbon.com/lightcarbon-gravel-frameset-with-micro-suspension-system-and-integrated-handlebar_p235.html December 10, 2023, 01:28:25 PM |
1 |
|
Re: Tideace NEW Gravel Frame: GR201
My build is pretty much complete for now. Sram eTap makes building up bikes quick work. Currently running a Sram Force road set until I bite the bullet and upgrade to Eagle GX T-Type, chain, and cassette. Photos to come. A few of things to note: 1. The included headset/handlebar spacers make zero sense. Since you have to route the hydro cables through the specific front holes on spacers, you can't exactly remove them should you decide later to make changes to your handlebar height. You could of course take a Dremel to make a split cut to accommodate the cables. But these type of considerations are standard from more premium brands. Correct me if I'm doing something wrong... 2. TanTan not providing any sort of manual or torque settings is annoying. This used to not bother me since most torque specs are consistent. Seatpost 5-6Nm, Stem bolts 5-6Nm, Derailleurs bolts etc. But again, little stuff like this goes a long way. No torque instructions for the 6mm expander plug bolt. The plug slips upward at 8Nm when pre-loading the top cap bolt. Will probably switch to a Neco long expander plug. No torque settings on the seat post clamp or saddle rail clamps. 3. Both the bottom bracket and caliper mount facings are excellent on my frame. My T47 BB installed flawlessly. And I was able to align both calipers just as quickly as any western brand. 10 minutes tops. Wish I could say the same for both my previous Tan Tan road frames. There was always slight disc rubbing somewhere. @Angelinho - I actually found a set of wide cranks in my parts bin. Once my 44t chainring arrives next week I'll make the switch. Thanks for the tip! December 28, 2024, 10:35:58 AM |
1 |
|
Re: Tideace NEW Gravel Frame: GR201
You can run eTap road 2x with 40c (41.5mm measured at the rim). For sure on dry roads. Can probably fit 42-44 on Shimano 2x. I really don't need anything wider than 38/40s within a 4 hour drive. The gravel around here is packed and tamed. This is my temporary setup for now... January 01, 2025, 12:25:45 PM |
1 |
Re: Tideace NEW Gravel Frame: GR201
Shake out ride this Monday  -GR201 size 540 -9Velo GV45 2.0 -SRAM Eagle GX/Force -10/52t Cassette 44t Chainring -Cybrei Ceramic T47 BB -Continental Terra Speed 45c -Onirii ONE 3D Saddle -Fizik Temp Bartape EDIT: I absolutely hate the way these look after install. -Cyclowax Waxed Chain February 22, 2025, 03:19:03 PM |
1 |
Re: Tideace NEW Gravel Frame: GR201
That looks GREAT I got it from amazon here’s a link https://a.co/d/3PwzeL9 March 22, 2025, 05:48:35 AM |
1 |