1
Road Bike Frames, Wheels & Components / Re: Carbon Speed Gravel Frameset Giveaway!
« on: June 13, 2024, 01:44:12 AM »
enter
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Thank you RoadieMKD for reply.
I've contacted Elitewheels via Aliexpress app and they said if i use "Sellers Shiping method" (pay more 75,98€) then i will not pay VAT and also the delivery is faster. Yes, i have a discount code that will save 120$ on orders over 599$, so in total i'll pay 505,3$ for this 65mm wheelset (aniversary discont sale included).
About tires.. Rear i use 28mm tire, in front i have 25mm, continental gp5000 (not tubeless, i'll use RideNow TPU superlight innertubes). This Elite Edge rim width is 28mm, can i use my 25mm tire on this rim with no problems?
Thanks, so the new plastic/injection moulded compression ring for the SL8 fits in the 268?no, does not fit.
Hi!
Fairly close to pulling the trigger on the 268. Does anyone know if the expander plug and compression ring design is identical to the recalled one on the SL7?
Thanks to all of you!
For any future projects: is there a way to prevent this from happening?
I already used a guide (from AliExpress ) . The cut itself was very good and offcourse i already was quite careful.
Now i sure will do some cutting tests with the left over piece of the steerer tupe.
Yea the TFSA is out. Leaning towards the SP Cycle Aeroad copy. Partially because my other open mold is labeled "CANDY" and this being a Canyon copy could get the same font and do "Candy" on the downtube.
https://www.aliexpress.us/item/3256806415702077.html?spm=a2g0o.best.0.0.2f982c25Y7RFo4&mp=1&gatewayAdapt=glo2usa
You have to wait a really good offer from elite wheels and also coupon from Aliexpress. During 11.11 there were 100 USD coupons.
I will give a try with this one :
https://a.aliexpress.com/_Ez8wIvT
Anyone here tried it?
I'm not sure how this will work out. There is no guiding for mechanical shifting. I assume you need to route the cables through the handlebar and the whole frame to the exit points. That will probably lead to a poor shifting performance, if it works at all.
Hi guys,
took some time to build the bike mainly because I was missing components and because of lack of time. However, the weather here is anyway still too bad to ride it outside.
Bike weighs 7.3 kg including pedals and wahoo mount. Only the bottle cages are missing...so pretty much spot on 7kg without.
Only things that I still need to work on are:
- fine tune the shifting
- check if I like the brakes or if I swap them to the stock ltwoo ones. I like the silver look of the zrace but they still feel a little spongy compared to the ultegra brakes on my old bike. Maybe I just need to re-bleed them again, let's see.
The build-process was generally pretty simple. The only issue I had was that I needed tro drill out the whole for the di2 cable in the chainstay as it was not properly drilled inside. I think there were some sharp edges inside so the cable didn't want to go through. The rest was straightforward.
I will wait with my first ride until we have dry conditions here
Future updates to arrive at around 7kg ready to ride might be a lighter cassette (I use a 105 11-32 right now), lighter chain and maybe 140 rotor in the back.