First spy shot 

I measured mine at about 118 mm of travel with a 42.5. Could have pushed a little more and probably gotten to 120 pretty easily.

NS list travel at 100 mm with a 37.5 and 120 with a 42.5. Based on my measurements, I see no reason to doubt them. I haven't tested a 37.5 or a 40, but I suspect the 37.5 would give you slightly more than 100 mm of travel.

Frame was mounted level, shock degassed, wheels off and a jack under the rear axle. Didn't push much beyond shock travel to get the 118 mm.

Does it peels off after a while?
Do you have some pictures of it on the bike?

Which size would you recommend for 170cm, size small or Medium?

I will use as trailbike 120/120mm...

I agree. Im running 270-300psi otherwise too low BB @75kg with gear.  So the solution is to put a volume spacer? did anyone do this? I'll buy a spacer if it works well.

Got mine finished

Hi all,

Has anyone noticed their chainstay pivot bolt (male side) coming loose? I've tried to use red low strength loctite on the thread but it still loosens. Will move to blue high/medium strength loctite but was wondering if anyone had better suggestions. The bolts are Alu so doesn't quite bite like steel. If it keeps happening with the blue I'll have to get some stainless bolts or find a better solution to it coming loose. Because it would ruin the frame if it bolt came fully loose.
Thanks!