Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Zoc

Pages: 1 [2] 3 4 ... 8
16
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-099 Build Questions
« on: January 12, 2022, 02:49:45 AM »
i mounted tubeless on velobuild rims, i changed the tape, front worked fine
rear didn't, was an old tire
after checking in a water bath i knew that the tape worked find but, the tire didn't
i used Schwalbe milk which is very thin, milkit or mucoff definitly works better,
i switched to a new TLR tire and no problems

17
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-177
« on: December 31, 2021, 02:04:15 AM »
Wau really nice colour
and the golden chain looks awesome

18
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: December 31, 2021, 02:01:37 AM »
after i used carbonpaste no problem
i also tried tape but it did't work very well

i read that you coult try some colorless paint or a piece of a can

19
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: December 29, 2021, 02:45:10 AM »
Quote from: dalon on December 28, 2021, 10:09:57 AM
Hello Werner,
Hi, did you use the one in the center of the photo for the front derailleur?
Thanks in advance
Greetings Davide

Hi
i mounted Sram force AXS an i used the one in the middle,
SRAM documentation and install instructions have been very helpfull to me

20
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: December 13, 2021, 09:22:15 AM »
Looking at the frame, there is more space above
i would say red

21
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: December 06, 2021, 06:21:10 AM »
Hi,

mounted sram AXS force disc
detached it from the lever, you will have to shorten it anyway
started at the rear,
attention don't install the bottom bracket before finishing the brakes

use a noise protecting housing damper like this
https://www.bike-discount.de/de/capgo-noise-protection-schaumstoffhuelle-fuer-schaltzugaussenhuelle

22
Vendor Discussion & Reviews / Re: Velobuild's price vs other options
« on: November 29, 2021, 02:42:08 AM »
Riding the VB-R-168 plus carbonwheels from velobuild now for half a year,
very satisfied,
the only thing i dont't like is the aero seatpost, as you don't get any replacement or variations like 0 offset
maybe VB-R-177 is a better choice

i didn't had any issues like cable routing or headset/sparcers as metioned by other users

full recomondation from my side

23
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: October 05, 2021, 08:08:20 AM »
Quote from: patliean1 on October 04, 2021, 10:27:44 AM
Hey All!

New member and first post in this forum. I've done my best to research this entire thread prior. Thanks for all the details.
Has anyone built up a 168 frame using the "2021 Handlebar With Separate Stem" combo instead of the supplied integrated handlebars?

The integrated handlebar options don't work me, as I need longer stem and narrow width bars (120mm / 40mm). Just wondering if internal cable routing will still work.

I plan to order a size 56 frame. For reference I am 6 feet tall (183cm). Long legs/arms, short torso. Wingspan is 6'3" (190cm)
Currently I own an Allez Sprint size 56 running a 130mm -17 stem  8)

Thanks in advance!

take this one in 440/100 as you can see on the picture there is a curvature forward, app. 2-3 cm,
i took 440/120 and thinking about buying the straight one
http://www.velobuildmall.com/products/carbon-fiber-road-bike-integrated-handlebar-with-spacers-for-hidden-cables-routing

24
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: September 06, 2021, 06:47:52 AM »
still looking for a seatpost with 0 offset for the VB-R-168,
does anybody has the chance to check if the tarmac 7 seatpost fits?
or any other recommondations
thanks

25
Component Deals & Selection / Re: Painting reccomendations
« on: September 03, 2021, 12:53:48 PM »
I used montana cans, spraying was very good,
But the Color is very soft, íf you use an Assembly stand for example
You See the clamp afterwards
Used a primer for Alloy
Paint normal black
And matt finish

26
After The Ride / Re: Help with Belt Drive System
« on: August 26, 2021, 11:51:26 AM »
How can you adjust the tension on such a Frame?

27
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: July 06, 2021, 10:29:18 AM »
i think there is a mistake
chameleon is not achieved by mixing two colours or three,

this are ready colours green/purple or so
you have to ask chris which chameleon colours he is able to paint,

if you like you can add a fade effect into black

i choose green/purple which is very dark,
means low light nearly black
normal light dark green
sunshine green with purple

pictures at the start of the thread

28
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: July 06, 2021, 04:03:58 AM »
has anybody found a seatpost with 0MM Offset fitting?

I'm not sure if this one fitts?
https://de.aliexpress.com/item/1005002569656656.html?spm=a2g0o.productlist.0.0.6ba438bamZKvv6&algo_pvid=dedf0e4e-1df2-40f4-a950-bdd510290fa7&algo_exp_id=dedf0e4e-1df2-40f4-a950-bdd510290fa7-1

29
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-168 Frame
« on: July 05, 2021, 10:13:25 AM »
Seatpost cover specialized Tarmac

does this work?
don't think so, as the bolt to fix the seatpost at the tarmac is on the upside therefor the cover has a small nipple which fits in the bolt
the VB-R 168 has the bolt below the top tube

30
26er & 27.5 (650b) / Re: Small 26" or 27.5" Hardtail Frame
« on: July 04, 2021, 02:06:48 PM »
Update on the build
shifting works fine,
some issues with the frame to get it running,
chainring to Big, vorher crankset but now it works

love the colours
now waiting for brakes

Pages: 1 [2] 3 4 ... 8