Hello all.

I am located in USA so all of the links below may not work for you. This is just an overview of my experience and what I found while building the new bike. I purchased a VB-R-168 frame, integrated bars, VB-60 carbon wheels, and the rest of the components needed to make it a rolling machine . Before I start, I wanted to say I was very sceptical of this purchase and worried that it would not turn out as good as it did. Chris from VB is very helpful and responsive. I have read of negative experiences relating to VB, but mine was thankfully a pleasant one.

Parts ordered
- VB-R-168 frame (size 58- matte black)- Velobuild
http://www.velobuild.com/products/-171
- VB integrated bars (440 mm width- matte black)- came with frame/forks/seatpost/spacers
- VB-RC-60 carbon disc wheels (matte black) - Velobuild
http://www.velobuild.com/products/-57
- Continental GP5000 25mm tires- Amazon-
https://www.amazon.com/gp/product/B08RNVPQY3/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
- Inner tube- Amazon
https://www.amazon.com/gp/product/B07XMJFJ5L/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
- Carbon assembly paste- Amazon
https://www.amazon.com/gp/product/B0012RIEM6/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
- Park tool grease- Amazon
https://www.amazon.com/gp/product/B000NORVHI/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
- Foam cable covering (to stop noisy cables)- Hardware store that sells everything
https://www.mcmaster.com/catalog/2029n11
- Shimano 105 groupset/ disc brakes/ press fit BB- Aliexpress- 007Bike Store
https://www.aliexpress.com/item/32943199402.html?spm=a2g0s.9042311.0.0.4cdd4c4dIxdtcS
- Bleed kit- Amazon
https://www.amazon.com/gp/product/B01LWN4LSD/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
- Shimano Ultegra center lock discs (160mm front 140mm rear)-
- Fizik saddle- Amazon
https://www.amazon.com/gp/product/B08PDLTTNN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- Sram bar tape- Amazon- I would not do this again. terrible feel
https://www.amazon.com/gp/product/B00142FFCG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
- Inner cable set (2) - Amazon
https://www.amazon.com/gp/product/B07JLWSF82/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

The good-
The frame, bars, and forks came within two weeks (to USA). The wheels took longer because I requested 350 straight pull hubs. Everything went together nicely (I definitely recommend using carbon paste and torque wrench). Getting the cables through the frame and bars was reasonably difficult, but not too bad. The bike is all together and I have a few rides under my belt. Great bike, stiff, fast. Definitely a great bike for the price. I hate when my bikes are noisy from cable rattle, etc... so I made sure I took all necessary precautions when building this one. The end result is pretty great considering the price point.

The not so great-
The seat post has slipped on me (it may not do this if you are smaller. I am 220 lbs-100 kg). I found adding more carbon paste and upping the torque setting slightly definitely helps. The wheels took a bit longer due to covid and my customizations which isn't the end of the world. The aero bars may be too aero for some. I purchased the VB separate stem and bar combo to replace the integrated bars- that hasn't arrived yet. I left the steerer tube slightly long to add spacers later on.

I have added some pictures of the bike fully built. Feel free to ask any questions if you have.

Thanks for reading/viewing.

Picture?  I am having a hard time visualizing the chainring bolt rubbing the chainstay. With a standard part like a 105 crank their ought to be no need for a spacer

Sorry for the delay. See attached for the picture of where I am referring to. It is that silver torx nut on the inside of the crank next to the chainstay. Thanks.