Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - eugeniob

Pages: [1]
1
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: April 08, 2025, 06:56:45 AM »
Quote from: kibsby on April 08, 2025, 06:15:15 AM
Thanks for the photo. So the "Sram cable stop" is located just below the frame's cable plug, right?
Does the cable stop attach securely to the plug?
The plug I have doesn’t seem to hold the cable stop—it’s either too thick or too thin for the hole in the plug.
So I was wondering if I need to glue in a thinner one with something like epoxy to keep it in place.
(Attached photo is the cable plug. Because I'm not exactly sure if that's the right term for it)

I used a Cable housing of 4mm and his cap inserted in the "Sram cable stop",  inserted the cable and tightened the small Allen screw .

The image is from LightCarbon page

2
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: April 07, 2025, 10:59:36 AM »
Quote from: kibsby on April 05, 2025, 09:06:01 PM

Hi, I'm assembling a Force 22 HydroR groupset, but I've hit a snag while installing the front derailleur. How far did you run the cable housing?
I noticed that I can't mount a cable stop at the cable hole under the downtube, so I'm thinking of running the housing all the way to the front derailleur. But it seems like the housing might be rubbing against the derailleur if I do that.
Do you have any advice?

Hi in mine Red22 HydroR  I use the "Sram Cable Stop"


3
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: March 09, 2025, 07:48:23 AM »
My clamps were a little tight and I was having trouble securing the saddle with the 7x9 rails, I solved this by slightly filing the seat of the rails

4
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 27, 2025, 04:23:08 AM »
Quote from: planet_sammy on February 27, 2025, 02:47:03 AM
I think it is the front derallieur cable hole?!

It looks like the cable "worked" there, I hope that Lightcarbon doesn't use the "assembly error" argument...

Mine is this

5
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 27, 2025, 01:34:47 AM »
Quote from: AdamB on February 26, 2025, 04:58:42 PM
Hey everyone, I received my lcr017-d about a month ago. Since then, I probably did around 700km on. Last week, a creaking appeared from the bottom bracket area and was getting louder as I rode more (Also just realized why I felt like my bike was bending sideway when braking....) . This afternoon, while changing my BB, I discovered this pretty big crack

While searching through this forum, I don't think I've seen something similar. What should I do next? I already contacted LightCarbon, but don't have high hopes of resolution...

Post other photo, I don't understand where that hole is, in mine I don't found

6
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 17, 2025, 11:40:26 AM »
Upgrade !!

The writings are a bit big but the effect is good, it's no longer an anonymous bike

7
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 16, 2025, 10:32:28 AM »
For those interested, this is the Sticker

8
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 06, 2025, 02:48:47 AM »
Quote from: Fer9n on February 05, 2025, 03:19:43 PM
Would be dope. Germany
For send to you, my forwarders want about 25 Euros if you have other solution send me the shipping label @ eugeniob@racine.ra.it 

9
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 05, 2025, 02:49:38 PM »
Quote from: Fer9n on February 05, 2025, 02:29:29 AM
Does anyone have a recommendation for spacers on AliX? Need additional ones, but LCs shipping is quite costly, so i'd rather just order on AliX-.

Thanks

Where are you ?

I have 2 spacer of 10 mm  and 1 oh 5 mm that I don't use.

10
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: February 03, 2025, 10:09:14 AM »
Today from Wendy  :) :) :)

11
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: January 26, 2025, 11:35:03 AM »
From today in LightCarbon catalog there is this image,

does anyone have more info ?

 

12
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: December 22, 2024, 10:05:02 AM »
Quote from: DavidG on December 14, 2024, 11:50:43 AM
Would anyone who ride the LC frame mind telling me their height and inside leg?

I seem to prefer the stack from the 52 (stack around 525mm) but the reach from the 49 (reach around 380mm).

The HT of the 49 seems.way too short for me perhaps with 172cm 81cm inside leg.

I am 165cm the inside leg is 77cm, my frame is 52 with stem 100mm , less (49) would be short 

13
Road Bike Frames, Wheels & Components / Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
« on: December 22, 2024, 08:11:46 AM »
Hello everyone, I mounted my new LCR017-D
Frame received November 26, 24


Wheel on road first time December 11, 24, with ride of today I do 628 km

The bike is comfortable and a rocket in group ride

This is my actual setup:

    Frameset: Lightcarbon LCR017-D, superlight, size 52, HBR 13 integrated bar & stem 400x100, seatpost with 0mm offset
    Wheelset: Vision TC 40 DB disk Front 160mm Rear 140 mm
    Groupset: Sram Red22 HydraR mechanical
    Crankset: Rotor 3D with PM Power2max
    Tires: Maxxis HighRoad 25 whith TPU Inner tube
    Saddle: Full Carbon from Aliexpress
    Pedals: Old Mavic titanium Keo compatible.

weight with pedals and bottelcage : 7,5 kg

Pages: [1]