1
Road Bike Frames, Wheels & Components / Re: 140mm one piece carbon road handlebar
« on: January 22, 2025, 11:38:56 PM »
I was looking on aliexpress for something in the $120 range at most.
Chinese Carbon MTB Forums
News:
Happy Holidays!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Road Bike Frames, Wheels & Components / 140mm one piece carbon road handlebar
« on: January 22, 2025, 09:47:55 PM »
Does anyone know if such a product exists? Regular road handlebar, preferably 360mm wide on the top with a little flair so maybe 400-420 on the drops with a 140mm integrated stem? All the ones I have seen max out at 120mm and the flare is much more than 50mm.
Lloyd
Lloyd
3
Component Deals & Selection / Carbon mtb crankset with 24mm axle
« on: December 02, 2024, 05:39:25 PM »
Hi all,
Is there anything equivalent to the Elilee x310 crankset (with 24mm titanium spindle) in the mtb world? I bought the elilee for a road bike and am very happy with it and would like something similar for an xc mtb. I am not interested in any aluminum 24mm spindle and 29mm spindle is too big.
Thx, Lloyd
Is there anything equivalent to the Elilee x310 crankset (with 24mm titanium spindle) in the mtb world? I bought the elilee for a road bike and am very happy with it and would like something similar for an xc mtb. I am not interested in any aluminum 24mm spindle and 29mm spindle is too big.
Thx, Lloyd
4
Component Deals & Selection / Re: Riro 24mm axle carbon crankset
« on: December 02, 2024, 05:36:41 PM »
There's a reason that Shimano 24mm axles are made of steel. They are just not strong enough. Dub axles at 29mm can be aluminum but of course they are much bigger and therefore stronger.
5
Road Bike Frames, Wheels & Components / Re: TanTan TT-X21 frame
« on: April 04, 2024, 11:51:23 AM »I bought this frame back in 2020 with this custom design, and only the frame from Tantan. I built the bike by myself.
About the groupset, it's a full mechanical Ultegra R8000... A real pain in the a** with the handlebar but it works flawlessly!
Frame 599$, custom design 70$, thru axle 24$ and shipping fees (to Switzerland) 85$
The current configuration is:
TT-X21 size 52
Full mech Ultegra R8000
Magene P505 powermeter with 52/36 Spécialités TA chainrings
Prime Primavera 56 wheels
Conti GP5000S TR
Same size as the one I built for my son but 105/ultegra groupset mix with 160mm cranks, aliexpress saddle, look pedals, 4i crank based power meter, Farsports wheels set up tubeless, vittoria tyres.
6
Road Bike Frames, Wheels & Components / Re: TanTan TT-X21 frame
« on: April 03, 2024, 12:08:18 PM »Hi everyone,
I'm refreshing this topic to show you my future bike!
This is my first experience with TanTan and I'm very satisfied with the service so far. I had very specific requirements for this turnkey bike, and Rose from TanTan was very helpful. Here are the photos I received today.
Description :
TT-X21 custom paint Size 56
50mm carbon rims with Continental GP500
Shimano 105 Di2
They should ship it this week, I can't wait to receive it.
I will update as soon.
When it arrives can you share where the battery is placed? Is it inside the seat post like most bikes or in the down tube. I am thinking of going Di2 on a x21. If it is place in the seat post is there a custom braket to make it stay there? If it is in the down tube what stops it rattling around? Thanks much.
7
Road Bike Frames, Wheels & Components / Re: TanTan TT-X21 frame
« on: April 03, 2024, 12:04:47 PM »Mine!@max_the_rider Did you buy this as a complete bike, painted by TanTan? What groupset is on it and can you share how much this cost? Thx much
8
Road Bike Frames, Wheels & Components / Re: TanTan TT-X21 frame
« on: March 29, 2024, 03:04:05 PM »
I am thinking of putting di2 on a tt=x21. Can someone share how they connected the battery into the seat post on their bike?
9
Road Bike Frames, Wheels & Components / Re: VeloBuild VB-R-268 frame
« on: March 29, 2024, 01:35:05 PM »Good afternoon: For my part, no problem in that matter.Blue loctite is for threaded applications. Will not help you with this.
The only thing about the entire assembly that is giving me any problems is the issue of anchoring the saddle. I had an Elita One carbon saddle installed but it was giving me some discomfort so I changed it for a Prologue Scrath M5 with round rails. I have tightened it to 15N and even today when I went over a bump it moved a little. It occurred to me to use blue Loctite applied to the entire area and see how it goes.
Generally carbon saddle rails are 7x9mm dimension and steel are 7x7mm so your seatpost saddle clamp might not be sized right for your saddle rails. Some seatpost saddle clamps are specific to 7x9mm or 7x7mm and some are not.
10
Road Bike Frames, Wheels & Components / Re: TanTan TT-X21 frame
« on: March 28, 2024, 03:53:08 PM »Hello everyone,
I just ordered the x-21 frame. Getting all the stuff together for the build right now. In case of the saddle I am a bit unsure. Does the seat post provide a round or oval clamp?
Thanks for your help!
How did it work for you? Any pictureds of the complete bike? How did the build go?
My son has grown. He currently has a size 52 and I am thinking of purchasing him a 56. My customer service experience with tantan has not been good with small parts missing from shipments and then them insisting that I made a mistake, extra handlebars I purchase missing etc.
11
Road Bike Frames, Wheels & Components / Re: Please help, my parcel is lost
« on: August 28, 2023, 05:46:33 PM »Hey, sorry didn't see your message earlier, TanTan actually had nothing to do with my parcel lost since i forwarded it to different warehouses, they delivered the package to the first warehouse without any problems.
Yes I understand tantan did nothing wrong. I was interested in how you went about selecting a carrier adn communicating all the at info to tantan etc.
12
29er / Rigid 29er boost fork with long axle to crown???
« on: August 27, 2023, 04:53:44 PM »
I am looking for a rigid carbon fork with boost spacing and 160mm brake mounts to replace a fox 32 stepcast with a 505mm axle to crown measurement. All the ones I find are 480mm (axle to crown) apart from a tideace model Mf-F-005 which I purchased on ebay. Unfortunately with that one the fork is a bit flexible which causes the brakes to rub when I lean the bike over to the left hand side. I would take 490mm axle to crown but it has to be stiff - I can't deal with brake rub! Recommendations very welcome.
Thx, Lloyd
Thx, Lloyd
13
29er / Re: Chinese Carbon 29er Pic Thread.
« on: August 27, 2023, 04:46:10 PM »I would really advise against getting anything from OG-Evkin. I have a cracked BB (after only 500km) so I asked about warranty and the seller (OG-Evkin Official Store) is very uncooperative.Presumably you paid aliexpress with your credit card so I would reach out to your credit card company either by calling them or disputing the charge.
It has been going on for more than a month now but is is just a series of false promises and long silences from their side. Very frustrating They have been promising a new frame for weeks but nothing concrete... I have mails Aliexpress customer service 2 times and it looks like they are a little more prone to answering the days after that.
The latest communication was last week and they said it would be shipped this week (they have been saying that for weeks. I will have to pay for shipping). They have not been answering messages since then so I am not getting my hopes up. If things would change I will keep you updated.
14
Cyclocross Frames, Wheels & Components / Re: True CX frame (not gravel)
« on: August 27, 2023, 03:48:49 PM »Frames I've seen so far that meet my idea of a good CX geo (high BB, short chainstays):
-Flyxii FE-806 AKA Tan-Tan/Seraph GR029
-Velobuild CX002
-honorable mention goes to Yishunbike GR095, but it's hard to get one since it's Yishun
My favorite has to be the Flyxii FE-806. Cheap, super light frame, and the geo is somewhat progressive (a couple mm more bb drop and slightly longer headtube than Cervelo R5CX or Canyon Infinite), but not so progressive it becomes a gravel bike. If you overlay the frame against a R5CX on bikeinsights.com the Flyxii is pretty much bang-on except the headtube is slightly longer and taller, which are good things IMO.
Why is Yishun hard to get??
15
Road Bike Frames, Wheels & Components / Re: 36cm bars?
« on: August 27, 2023, 03:27:15 PM »I've had my eye on the Kocevlo handlebar, only reason I haven't gotten it is because the stem is only available up to 110mm and I need 130mm. My friend has bought a set and I gotta say they're quite nice given the low price https://www.aliexpress.us/item/3256804787569282.html
Airwolf sells them up to 120mm stem: https://www.aliexpress.us/item/3256805079402621.html
Premium-tier options include Farsports F1: https://www.pandapodium.cc/product/farsports-f1-classic-handlebar/
@dsveddy did you ever find a 130mm stem 360mm width combo in an integrated handlebar? What did you go with in the end? I am looking for the same dimensions to keep my son riding on his bike a bit longer while he is still growing.