So I’ve finished the build a few weeks ago, suspension is set up and I’ve made a few runs with it. For my poor legs I took a 30tooth chainring it climbs very well. Me and my friends doing only 1k hm tours and riding the rough trails down it works great but it was a hard way to fix everthing .
I took the original specialized bearing kit and bolt hardware but I had to build me some spacers to get out the play of the rear triangle. That was only an issue with the specialized hardware. For the headset I bought also a higher quality one and took one 2,1 mm Spacer to fix the gap on the upper bearing and cap. I don‘t recommend building this one without mechanical background there are lots of small problems coming up here and there. But if you master them you’ll become a cool bike working well

Here it is I’m almost finished with the build a little Setup on the suspension and bleed the frontbrake left over.
It ended having 13,85 kg and I don‘t went with that super lightest parts like my nx parts I had left from another bike and some other parts 

Sometimes i left everthing in downstairs and went to bed before I throw everthing away

Not possible, carbon layout in that area is not thick enough, it will compromise the frame structural integrity.

PD: For those wondering, I got a front triangle replacement due to a faulty bolt shock tab; so I decided to experiment with the old triangle

That’s some bad news but i‘can accept it

I was told it’s 160mm, i‘ll install 180mm

Here my Part List i‘ll Go with

Fork Fox 36grip2 (2019 160mm)
Damper Fox Float x2 (2021 210/50)
Brake magura mt5 (203/180)
Seatpost specialized
Wheels dtswiss M 1700 spline
Sram nx groupset

Rest i‘ll search in my lost and found Boxes

Now i‘m waiting for some Parts and Protection foil. First thing i did was disasambling everthing. The bearings Are Not Made for dirt, these came with a Metal Seal. No Bolt was greased and set with loctite.
The Paintjob Looks Good only Part where it’s Not Good is like the other Said at the bearing an screw points. The headset cap won‘t work there is also a Spacer missing. That‘s it for now Hope the Post man will bring the rest till weekend Starts.

Hey guys
i‘ve one Frame ordernd too, it Took a while to be shiped (ordernd end of April via Ali) now it’s on it’s way.
Has anyone tried to cut off the swatbox?