Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ChinerStevie

Pages: [1] 2 3
1
Component Deals & Selection / Re: DT 240EXP hub clones Goldix, Venfort
« on: March 24, 2025, 02:31:48 PM »
Hi,

can somebody help me finding better hub out of Goldix R240 SL and the one in this wheel (seems to be H-Works SR330):
https://www.aliexpress.com/item/1005007990155832.html

I wanna buy that wheels and am considering switch to R240 SL which is lighter - but is it same durable???

BR

2
Road Bike Frames, Wheels & Components / Re: Yuanan Carbon fiber wheelsets middle year discount promotion
« on: October 29, 2024, 07:04:42 AM »
Quote from: bmrk on October 28, 2024, 04:37:46 AM
this does look like the moulding bladder remains that where not extracted properly.

Is that an issue or not really?

3
Road Bike Frames, Wheels & Components / Re: Yuanan Carbon fiber wheelsets middle year discount promotion
« on: October 27, 2024, 03:36:13 AM »
Any recommendation on an endoscope? I might buy one.

But am still wondering how that wheel did pass quality control. One of the valves was too short as well.
I'm scared it won't hold in that area and also the unbalance it's causing is close to valve so adding up with the valve's weight  >:(

I've reached out to Kelly, let's see what she replies.

4
Road Bike Frames, Wheels & Components / Re: Yuanan Carbon fiber wheelsets middle year discount promotion
« on: October 26, 2024, 02:04:44 PM »
Hi,

today I was finally about to install my new Yuanan Wheels today which I received some weeks ago.

But then I noticed that the rear wheel is unbalanced. While it is (to my eyes) perfectly trued it is wobbling (uneven weight distribution).
The front wheel doesn't have this at all.

I then did try to look into spoke holes with help of a fleshlight and noticed amassed and displaced carbon fibres and resin at the point of unbalance.
I tried to take pictures but it didn't work out too well.

Is this acceptable? I had expected my new wheels to be well balanced when coming fresh from factory.

Regards

PS: Not sure if what I did photograph is actually causing the unbalance, but it doesn't look fine in that area for sure.


5
Component Deals & Selection / Re: Elite wheels for mtb
« on: October 24, 2024, 07:33:41 AM »
There's several threads on Yuanan here. Reach out to them directly (Kelly, ...).

6
Road Bike Frames, Wheels & Components / Re: Yuanan Carbon fiber wheelsets middle year discount promotion
« on: October 20, 2024, 04:32:06 PM »
Can someone give me their current contact? Website is down.

7
Cyclocross Frames, Wheels & Components / Re: Frame for mix road/gravel use possible - SPcycle g056 build
« on: October 10, 2024, 12:50:49 AM »
Quote from: Ludo on October 04, 2024, 05:50:51 PM
Well CSC wheels fail. One of the wheel wasn’t holding air well, couldn’t get the tire seated properly (clincher); after much faffing around, at attempt number 6 or 7, I inflated the wheel and started to hear some strange sounds, then the outter skin started bulging. Air got on the spoke hole side and delaminated the carbon I think, one wheel is good for the bin…

That sucks. How did you end up with the seller?
Asking cause I ordered similar one which is soon to get here...

8
Component Deals & Selection / Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
« on: October 01, 2024, 01:05:07 AM »
Quote from: pushpush on September 29, 2024, 05:33:43 PM
I tried some Cooma pink pads. Most of them went in the trash. Using galfer wave rotors I burned through a set in a couple of weeks and they were noisy af when wet. I was not impressed at all.

That's interesting. Ordered them too but haven't tried yet.
They had lots of good comments in forums.

9
Cyclocross Frames, Wheels & Components / Re: Gravel Bars (Carbon vs Alloy) (Flared vs Regular)
« on: September 24, 2024, 03:55:47 AM »
Anyone else got experience with ZNIINO 25°?

10
Component Deals & Selection / Re: DT 240EXP hub clones Goldix, Venfort
« on: September 20, 2024, 03:53:28 PM »
How are wheels and hubs?

11
Component Deals & Selection / Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
« on: September 16, 2024, 02:56:11 AM »
Quote from: bremerradkurier on September 05, 2024, 04:30:20 PM
Elita now offers a longer rail version of one of my favorite AliX saddles.

https://www.aliexpress.us/item/3256806853095715.html?spm=a2g0o.order_list.order_list_main.46.5c491802A1CBq9&gatewayAdapt=glo2usa

I did order a 3270L and it was crap. The rails where not parallel and I was able to break the carbon base with hands.
So directly requested a refund.

12
Component Deals & Selection / Re: DT 240EXP hub clones Goldix, Venfort
« on: September 12, 2024, 01:16:20 AM »
Quote from: ultreia on August 23, 2024, 03:35:38 AM
Hello,

Could you tell me what model is this hub?

What wheels did you buy?

13
Road Bike Frames, Wheels & Components / Re: Long term experience with RD13 hubs?
« on: September 10, 2024, 06:32:33 AM »
Quote from: rtuk on September 10, 2024, 05:44:20 AM
Can you share the vid?

DM me your mail.

14
Component Deals & Selection / Re: Chinese cycling clothes
« on: September 10, 2024, 06:31:41 AM »
Quote from: Kraxler on September 10, 2024, 03:06:48 AM
I'm useing the following Bibs from Spexcel.
They are okay for the 2 - 3h Winter rides in the Northern Part of Europe.

https://de.aliexpress.com/item/1005003538655977.html?pdp_npi=4%40pre%21EUR%21%E2%82%AC%2051%2C99%21%21%E2%82%AC%2051%2C99%21%2156.04%2147.50%21%40210384cc17259553227597107ef76a%2112000026272221711%21sh%21DE%210%21X&spm=a2g0o.store_pc_allItems_or_groupList.new_all_items_2007599144627.1005003538655977&gatewayAdapt=glo2deu

Thanks, but their size chart goes only to 185cm. I'm 2m...

15
Road Bike Frames, Wheels & Components / Re: Long term experience with RD13 hubs?
« on: September 10, 2024, 01:40:07 AM »
I asked them and even got  a video - great support on this.

Pages: [1] 2 3