Has anyone tried matching P505 PES base with wolftooth 1x chainring? I'm having issues installing the bolt as there's a gap that remains after tightening the bolt.

The bolt i bought has a 6mm length, is that the right bolt to use?

Note: The chainring is wolftooth 42t 110BCD for shimano crank.

Frame just arrived. I've tried putting in the BB and fitted the PES Magene onto it. Everything seems to be working fine. Crank was rotating freely.

Do note that I only did a quick test fit, seems adding a bit extra spacer on the drive side will help add clearance in case of mud or dirt.

Btw, anyone know what's the strange part in the bag for? It has the word DS068 labeled on it. Seems like a bending tool for hoses?

I'm also tempted to replace the headset Clamp. Anyone had issues with the default one?

How is the clearance for p505? Heard that it may have issues with T47 BB. Is everything working normally?

Finally got this built and out for a shakedown ride - haven't had it on the gravel yet but first impressions are excellent. Geometry feels dialed. Paint looks fantastic. SRAM mullet is fantastic for a gravel build. Size S and a 70mm stem (same as Canyon supply on stock builds) is ideal for my 174cm height. XMCarbonSpeed wheels were easy to set up and seal, and even the own brand tubeless valves seemed nicely made.

Downsides in building:
- BB and brake mounts needed facing
- Grommets on the frame are a poor fit once you run a hose through them (if I had my time again I probably would've ordered the fully internally routed one).
- Headset/UDH/axles are pretty chunky - suspect that a fair bit of weight could be shaved off these.

Code: [Select]

Part      Item                                           Weight (g)   Notes
---------------------------------------------------------------------------
Frame     SP Cycle G068 size S (Grail 2023 clone)        2000         Weight includes frame, uncut fork, headset, all bolts, 1x blanking plate, seatpost clamp, thru-axles, UDH
Fork      SP Cycle G068 size S (Grail 2023 clone)       
Headset   SP Cycle G068                                 

Seatpost  Elita One 27.2mm 0 offset                      141
Bars      Kalloy FL12 40cm                               299
Stem      Kalloy non-uno 70mm                            127
Saddle    China carbon                                   160

Groupset  SRAM Red mullet
Shifters  SRAM Red AXS                                   467
Brakes    SRAM Red AXS + IIIPro 160mm rotors             520         
Crank     Sram Force D2 DUB wide + Magene P505 + SRAM 40t700
BB        DUB Road wide T47                              100
FD        1x                                             0
RD        Sram GX Eagle AXS                              430
Chain     Sram GX 12 speed                               250
Cassette  SRAM XG-1295 10-50                             354

Wheels    XM Carbon Speed 50mm deep / 28/36mm wide       1430         Front = 670g, Rear = 760g
Tubes     Tubeless sealant + valves                      120          Valves = 12g
Tyres     Tufo Thundera HD 48mm                          1090
Skewers   Thru axle                                                   Weight in frame

Pedals    Shimano XT M8100                               330
Bar Tape  AliX Supacaz                                   100
Cages     Carbon                                         50
Cables    Battery                                        25
Other     AliX integrated Garmin mount                   40

Total                                                   8733          8.7 weighed


Anyone have fitted a Magene P505 crank to this frame?

https://www.aliexpress.com/item/1005005506880823.html?spm=a2g0o.productlist.main.1.e403186aVBEHMV&algo_pvid=54bf5c07-0423-474e-97b6-f4b328dc7353&algo_exp_id=54bf5c07-0423-474e-97b6-f4b328dc7353-0&pdp_npi=4%40dis%21NOK%213527.57%212680.93%21%21%21313.95%21238.60%21%40211b813c17303174858873417e5b2a%2112000033438014563%21sea%21NO%216107118458%21X&curPageLogUid=DOPECF8vwn2J&utparam-url=scene%3Asearch%7Cquery_from%3A

I see here they specifically say "Not Support T47-86.5mm and BB386 bottom bracket ！" - anyone know why?

Example this one I assume will fit into the G068 and then a Magene P505 stock should fit?
https://www.hambini.com/product/t47-86mm-threadfit-shimano-racing-bottom-bracket/

Looking into this as well. I'm interested in getting P505 for my G068 as well.Saw in the P505 thread that it works with G056 though with very small clearance.

Wonder if anyone has ever tried with G068?

There's a brand called kactus in aliexpress. They have a T47 for SRAM Dub. I just bought one and still waiting for it to arrive.

I'm reading through the posts in this forum as well. The Spcycle G056 looks very interesting. It's much cheaper vs Ican.

Do you guys think it's a better option vs buying X-Gravel 2?