Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - endo.alley

Pages: [1] 2 3 ... 14
1
29er / Re: FM1002 / FM1166 - 150mm frame
« on: December 28, 2023, 01:07:55 PM »
Quote from: casual_build on November 22, 2023, 12:00:10 AM
My bad it's ~571, editted my last post.
In your situation I agree the 170 Zeb might affect steep climbing.
The 160mm lyrik is a great fork, I wish 170 was still an option.
If you are lightweight and do a lot climbing, maybe go with lyrik.
I have a Lyric Ultimate 170mm. The bike climbs and handles great. Seat angle difference between 60mm and 170mm can be made up by sliding seat 1/4" forward. But probably not necessary.

2
29er / 180 mm rotor on a Carbonda fm909 ?
« on: June 20, 2023, 04:56:40 PM »
Can I use a 180mm rotor on a Carbonda fm 909? I am trying to do just this with Shimano XT brakes. And a 180mm post mount adapter to space the caliper properly. The mounting bracket of the caliper hits the frame with the 180mm adapter in place. Has anybody had this problem?

3
29er / Re: Wanted - hardtail downcountry frame
« on: April 05, 2023, 12:58:28 PM »
I wonder if you can buy two 52mm Slack-R inserts? One for the top and one for the bottom? You would probably have to glue the top in with epoxy.

4
29er / Re: Carbonda FM909
« on: March 10, 2023, 07:35:27 AM »
What is the maximum size dropper post/insertion for a medium sized FM909?

5
29er / Re: Carbonda FM909
« on: March 10, 2023, 07:34:11 AM »
Can you use an offset chainring?

6
E-Bike Frames & Builds / Re: M820 Bafang - CEF50 frame ?
« on: March 06, 2023, 07:44:40 AM »
Quote from: JimLee on March 02, 2023, 03:27:31 AM
the Geo date, and carbon wheel/ carbon handlebar for choosing,

That looks great.

7
29er / Re: Carbonda fm936 Thoughts
« on: February 28, 2023, 10:34:13 AM »
Quote from: Arno Knell on February 26, 2023, 01:46:38 PM
This little part (Reverse Angle Spacer) makes a 'big" different
for me, in combination  with the new 120mm linkage.

What is a Reverse Angle Spacer? Where do you get one? Is it a slackening of head angle headset?

8
E-Bike Frames & Builds / Re: M820 Bafang - CEF50 frame ?
« on: February 02, 2023, 05:14:15 PM »
I found this.

https://www.lightcarbon.com/lightcarbon-e-bike-frame-bafang-m820-e-mtb-carbon-frame-for-all-mountain_p222.html

9
E-Bike Frames & Builds / Re: Kabon 29er emtb
« on: January 30, 2023, 01:02:22 PM »
I think Shimano has an improved version of that motor coming out this spring.

10
E-Bike Frames & Builds / M820 Bafang - CEF50 frame ?
« on: January 29, 2023, 02:57:40 PM »
I have seen rumors of a lightweight E-Bike frame called the CEF50 frame to be paired up with the M820 Bafang motor coming this spring. Anybody familiar with this?

11
E-Bike Frames & Builds / Re: Kabon 29er emtb
« on: January 29, 2023, 02:47:43 PM »
Quote from: FullCarbonAlchemist on January 22, 2023, 12:34:59 PM
If you ride medium/17” frames I don’t see any downside…this is basically the Flybike/Carbonda e-bike version of a FM1002 with slightly more rear travel, higher leverage and a non-trunnion shock.

I think this frame is also available from Carbonda if you need other sizes…and they’d probably be better to deal with long term if you ever need replacement parts for the linkage etc.

The Carbonda FM E-1126 looks great. It is designed for a Shimano ep800 motor as opposed to a Bafang motor in the Kabon. I am not sure of the availability of Shimano motors as a one-off purchase.

12
29er / Re: XC full suspension frame
« on: January 20, 2023, 08:35:46 AM »
Buy a Carbonda FM936 of FM909. Put whatever chainring on it you like. I won't tell anybody if you don't. Maybe need a chainring with a spacer to clear the chainstays. Maybe not.

13
29er / Re: FM1001 / FM1156 - 135mm frame
« on: January 19, 2023, 01:47:29 PM »
Quote from: Jotegr on January 04, 2023, 07:20:41 PM
I actually don't think there's a 1.5-1.5 integrated angleset available at all. The only integrated angleset I can think of is the 9.8 one and it's not going to do the 1.5 upper cup.

Maybe custom 9point8 Slack-R setup using two bottom cups.

14
E-Bike Frames & Builds / Re: Dengfu E06 e-fat bike full squish
« on: December 18, 2022, 10:27:31 AM »
Only the Ican sno4 FS fatbike. Great bike.  And in the summer you can run a separate set of 29er 40mm wheels/rims and put some 3.0 tires on the bike. Now that is some fun.

15
29er / Re: Carbonda fm936 Thoughts
« on: December 03, 2022, 12:24:41 PM »
Offset eyelets for the shock mounts? Shorter cranks? A Slack-R headset insert will raise the stack height 10mm. Probably 5mm on BB. Considering that on y FM909 next spring.

Pages: [1] 2 3 ... 14