Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hidperf

Pages: [1]
1
Component Deals & Selection / Re: 35mm bars available?
« on: September 03, 2019, 02:28:06 PM »
I currently have one from LightCarbon, I guess the AM04 (they changed their name schema). So far super happy with it, solid as a rock:  https://www.lightcarbon.com/mtb-handlebar_c85

Thanks! I'll give them a look.

2
Component Deals & Selection / Re: 35mm bars available?
« on: September 03, 2019, 02:26:40 PM »
Why don't you just slide your controls in board a little and use open ended grips so you can slide them in as well?  Keep moving them in, 10 mm at a time until you think youve gone too far.

That IS a good idea. But I was hoping to avoid having extra bar length hanging out past the grips while testing, as I don't expect to have a good feel for width after a short ride.

3
Component Deals & Selection / 35mm bars available?
« on: August 30, 2019, 09:46:18 AM »
I'm wanting to do some experimenting on bar width and really don't feel like cutting up my 800mm Renthal Fat Bar carbon that came with the bike until I know what width I like the most.

I've been looking around and can only find Chinese carbon bars in 31.8 diameter.

Anyone know of 35mm bar, preferably as wide as 800mm so I can start with something similar to what I have.

BTW, I have handlebars from this company on my old bike and they've been fantastic. Not the cheapest around, but I thought I'd pass it along.
https://www.carboncycles.cc/

4
29er / Does anyone make a long 130-150mm travel frame yet?
« on: October 04, 2018, 10:33:07 AM »
I've had my 100mm XC build for just over 6 years now. I'm now in the market for a longer travel bike and am considering another full build, but I haven't seen much out there.

5
Fat Bikes / Has anyone built one from the kit offered by A.C.E
« on: November 30, 2015, 01:48:13 PM »
I get these emails about once a month and noticed this months email offered a fat bike kit for $1,899.
http://www.asiancyclexpress.com/free-shipping-26er-carbon-light-fatbikekit-fat26-fatbikekit

The kit includes:
Frame - 17" or 19" in UD Gloss or UD Matte BSA bottom bracket - 19" 1580g
Fork - 15x135 thru or 15x150 thru - 630g
Rear frame options for 12x190 thru, 12x197 thru, or 9x190 QR. I'm assuming the hubs will match the frame and fork specs you pick.
26" carbon wheels with skewers/thru axle and rim tape- Rear hub options - Shimano 9/10 spd or SRAM XX1 - Presta or Schrader valve rims - 2200g/pr
Carbon seat post - 190g
Carbon bar - 180g
Alloy stem - 108g
Headset
Bottom bracket
Alloy crank set- 175mm 34t - 1153g
Carbon saddle 105g
26x4.9 tires and tubes - 3.5kg
Seat post clamp



Seems like a pretty complete kit.

6
29er / Re: Chinese Carbon 29er Pic Thread.
« on: September 03, 2015, 04:05:36 PM »
Thank you for the kind words.  Go right ahead and copy it.  You could also consider inverting the B&W areas for something similar but different.

I'd have to keep it the same since I also have a white fork and black shock.

What I'd really like to do with mine is leave my current decal layout on the bike, scuff everything around it, spray it white, then peel off the decals so they will come through in carbon. Then a nice clear coat over everything.
Maybe next time I do a complete tear down I'll look into that.

7
29er / Re: Chinese Carbon 29er Pic Thread.
« on: August 26, 2015, 09:16:36 PM »
This thread needs more pictures!



God I love that paint scheme. I'd copy it if it wasn't so obvious I'd ripped it off.

8
29er / Re: Chinese Carbon 29er Pic Thread.
« on: March 03, 2015, 09:51:05 PM »
Nice bike, Steve! And nice decals. How did you make the 'Specialized graphics' ? Is there a font-type available ?

And a nice blog you have. When I'm having more time, I'm going to read you blog completely.

Thanks! It's been a blast building it and riding it, although it's taken a toll on me. Several hard crashes and one broken collarbone.  :o

As for the graphics, I found a font that was VERY close to the one Specialized uses. I then took measurements of the areas I wanted graphics and sent those measurements, along with frame pictures laying out the areas where the graphics would go, some examples from Specialized frames, and the font to a vinyl graphics guy and he made them. I think they were around $60.00 including the graphics for the rims.

Thank you for the comment on the blog. I'm WAY behind on updates. I'm stuck on day 5 of the 7 day trip. It was a brutal day and I just haven't had time to write about it. And I've had so many more things happen since that trip ended, and so many changes to the bike as well.
I should start on it now before the weather breaks and I'm out riding again.  ;)

9
29er / Re: Flyxii FR-216, any experience?
« on: March 02, 2015, 11:01:40 PM »
Even with the $200 difference I'd still recommend Iplay, generally better quality products.

Has anyone ever determined if they're the same frames or not? I've always heard they're all made by one supplier and sold through various distributors.

Anyone weighed one of these frames? any accuracy to website?

I have a 17" and it weighed 2,064g

10
29er / Re: Chinese Carbon 29er Pic Thread.
« on: March 02, 2015, 10:32:59 PM »
Man, this place has BLOWN UP since last time I was on here! Awesome!

Here's some pictures of my Flyxii FR-210 build. I've got hundreds of pictures from the various stages but I'll only put a couple here.

This is right after it's first ride. I was still waiting on some parts to arrive, but I had some spares on to get me by.


I originally built the bike for a 7 day trip from Durango, CO to Moab, UT.
This is the bike all loaded up on day 1. It weight a whopping 40lbs at this point!


Day 6 of the ride. Worst day of them all.


After the Colorado trip, I made a bunch of changes. One cosmetic change was having decals made up that matched the Specialized graphics but using my name. I put them on while I was swapping out all of the pivot bearings and most of them are black so you can barely see them. But it's caused a few confused looks on the trails.




And this winter I made even more changes. 1x10 conversion and new shock. I don't have any finished product pictures yet.




11
29er / Re: Other IP-036 Chiner FS Carbon Builds
« on: April 30, 2014, 09:48:13 PM »
Steve, sorry to hear you took a bad spill on your bike, hope you have a speedy recovery.  Always looking forward to seeing any of your updates, your blog is a good resource for anyone building a FS Carbon 29er.

Thanks man! It's been terrible sitting inside while the weather outside laughs at me. Especially when my new road bike arrived the same weekend as the crash. Do you know how bad it sucks having all these bikes just sitting there, mocking me?  :P

Also thanks for the kudos on the blog. I had such a hard time finding really good info when I was building mine, that I thought I'd document it as I went along. Hopefully many people will benefit from it.
With the new road bike and me starting to commute to work every day, it might become a combination blog now.

12
29er / Re: Other IP-036 Chiner FS Carbon Builds
« on: April 30, 2014, 09:43:27 PM »

I was wondering where the traffic was coming from all of the sudden. Great forum you got going here.

Thanks for the referral. I'm going to have plenty of time over the next 6 weeks to update the blog since I'm out of commission for a while after a nasty spill on my 29er 2 weeks ago. Broken collarbone :o
Day 6 update should be a big one, it was the worst day of the 7 day trip.

Hey, no problem hidperf..

Would it be possible to get a link back to chinertown somehow? Nothing major, but a brief mention in one of your articles and a link to chinertown.com would be sweet, and help the forum get more traffic from the search engines.

Also, I have pretty extensive experience with wordpress and blogging, in general, if you have any questions or just want to chat. I'll be setting up an off topic board here soon, so feel free. Just an offer, it's my other passion/hobby and I could talk about it all day. And by all means, feel free to ignore the request. Just glad to have you here at Chinertown!  ;D

For sure. I'll make sure I mention you in my next update.

I appreciate the offer on the site. I'm just doing it for fun but I'm always looking for new ideas or recommendations.

13
29er / Re: Other IP-036 Chiner FS Carbon Builds
« on: April 26, 2014, 06:18:25 PM »
Here is a link to another MTBR member's IP-036 build.  He did a nice job with his blog and he continues to update it as he does some upgrades and he also talks about an epic 7 day ride he took on his bike.

http://steveboehm.com/wordpress/

I was wondering where the traffic was coming from all of the sudden. Great forum you got going here.

Thanks for the referral. I'm going to have plenty of time over the next 6 weeks to update the blog since I'm out of commission for a while after a nasty spill on my 29er 2 weeks ago. Broken collarbone :o
Day 6 update should be a big one, it was the worst day of the 7 day trip.

Pages: [1]