Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Albastru

Pages: [1]
1
29er / Re: Chinertown's Holiday Giveaway!
« on: November 20, 2017, 02:31:48 AM »
I have a DengFu M06 29er and i would buy another one in a second :)


2
29er / Re: Albastru's Dengfu M06 build
« on: October 11, 2017, 06:50:52 AM »
Thanks for answering. I don't like any kind of play :) It has to be spot on for me.

Pics with the bike :)


3
29er / Re: Albastru's Dengfu M06 build
« on: October 09, 2017, 01:32:57 AM »
The build is complete, 11.1 kgs with pedals and everything.
I managed to destroy 1 of the screws that is holding the rear shock. To get it out of the black rocker link i hit it with a screw driver and somehow it enlarged and now it enters very hard in the eyelett of the shock and once mounter, the shock has play on the bolt.
The bushing of the shock is ok, the rocker arm doesn't have play with the bolt mounted... it got play between the shock and the bolt :(

4
29er / Re: Albastru's Dengfu M06 build
« on: October 03, 2017, 02:00:14 AM »
So build is kinda complete. Need to put the cables for the remote lockout and the pedals.
So, without pedals 10.65 kgs, with remote for the fork and shock .

5
29er / Re: Albastru's Dengfu M06 build
« on: September 30, 2017, 10:02:38 AM »
The build is very slow :) i hope that by the end of the month will be fully built :)


6
29er / Re: Albastru's Dengfu M06 build
« on: September 29, 2017, 05:29:51 AM »
So i don't know if anyone said but the dimensions for the bushings are 22.2x8mm on the linkage and on the top part of the frame 21.84mmx8 .
Just got the bushings so i am going to start building it tomorrow :)

Will come back with pictures.

7
29er / Re: Albastru's Dengfu M06 build
« on: September 14, 2017, 02:11:19 AM »
Yeah, when i saw the fork listed on ebay i knew i had to have it.
Worse thing was that the seller didn't want to ship it to Romania. So i had a friend to recieve it in England and then ship it to Romania ...

Atm i am looking for bushings for the rear shock. Looks like i have 22.2x8 .


8
29er / Re: Albastru's Dengfu M06 build
« on: September 13, 2017, 01:52:30 AM »
Mounted the BB and the headset.
Still waiting for bars, stem, seatpost and saddle.


9
29er / Re: Albastru's Dengfu M06 build
« on: September 07, 2017, 05:44:38 AM »
I don't know yet, got it 3 hours ago :)
They do seem to be moved abit closer to the BB.

10
29er / Re: Albastru's Dengfu M06 build
« on: September 07, 2017, 04:18:29 AM »
And the frame just arrived :)

Let the asembly begin :)

11
29er / Re: Albastru's Dengfu M06 build
« on: September 02, 2017, 03:58:13 AM »
So got the wheels built.

Dt Swiss 350 hubs
Dt Swiss Revolution butted spokes
Stan's No Tubes ZTR Crest Mk3 32H 29er rims

They came at 1540g. I'm super happy :)



12
29er / Re: Albastru's Dengfu M06 build
« on: August 30, 2017, 02:47:41 AM »
Let's hope it wont that long :( I have sold the old bike so i need something pretty quick :)

At the moment it's on route to europe with 6-20 days shipping time . We will see :)

13
29er / Re: Albastru's Dengfu M06 build
« on: August 30, 2017, 01:30:51 AM »
It took about 4-5 days to get the frame to the paint shop. So i gues it wasn't in stock and i had to be produced.
Another 5 days for painting and then it was shipped.


14
29er / Albastru's Dengfu M06 build
« on: August 29, 2017, 02:24:37 AM »
Hello,

I have ordered 2 weeks ago a M06 frame from Melody (DengFu), 17.5 inches with 12x142 rear axle.
Also ordered it painted neon green with matt finish.
http://imgur.com/a/2Bdq0

Allready have a 165x38 Fox DPS Kashima and a Fox 32 FIT 4 series 29er fork.
Going to use XT brakes with XT rotors.
Sram Eagle GX 12 speed drivetrain with 32t ring
DT Swiss 350 hubs, DT Swiss Revolution spokes and ZTC Crest Mk 3 rims
Got some continental xking 2.2 tires.

All i can do now is wait for the frame to arrive :)


Pages: [1]