May depend on the size. But comparing medium to medium, the 707 has a 11mm longer reach than your RCX, and 1.5 deg slacker head angle. The head angle would push the front tire another 12mm forward. So you'd have 23mm more toe clearance than you have now.

ok super for this complete answer.
I don't know much about geometry
According to you, the 696 or the 707 to have a more comfortable bike in terms of the riding position?
and suddenly, I would be more lying on the 707 than on my RCX?

thanks

edit :
i make a lot of search,because i don't want to buy a bad frame for me and my practice.
so,in another forum,i found this :
"I normally ride a 56cm road bike. I went with the Medium 696 with 110mm stem. I could have gone for the Large with a shorter stem. Since I ride this bike on the road a lot, I went for the smaller bike for more agility"

which means that I can perhaps move towards a smaller size, even if it means putting on a longer stem and thus maintaining a more comfortable, straighter position, although the reach is long on this frame?

with the S size,it has the same reach and stack than my RCX in M size

Hello
For my mtb i ordered 2 rims
29"
Asymetric
30mm
Hookless
28/28 holes
I weighed 312gr for a rim

A guy in France mounted with novatec hub
D792-b12 for the rear
D411Sb for the front

Spokes are:
Front -->pilar xtra 1420 aero(bought at sky bicylce)
Rear --> dt swiss(i don't know the exact ref)

Weight :
558gr front
744gr rear
I rided them for 500km and all is ok


For my new project road disc bike ,i ordered a complete wheelset at sky bicylce because i have had a good feeling with that shop.
This wheelset should be at 1330gr
Asymetric rims
Height 42mm
With novatec 411/412
24/24 holes

When i will recieve it,i write a debriefing.

I've just ordered the merida.
The last one in my size(56).

hello

i want a comfortable frame with discs,so there are several possibilities.

gravel or endurance.

i wanted a Cube Attain(i found just the frame with good price) but it's a special fork with 1 1/8-1 1/4,so I was looking for the Chinese frame.

my wishes :
- price around 500$ maxi
- carbon frame
- disc (if possible 160mm)
- tapered fork
- comfortable geometry
- if possible a seat tube "classic" (more easy to find)



i found frames,but i can't decide.

here the links.......

https://fr.aliexpress.com/item/-/32837502604.html?spm=a2g0s.13010208.99999999.273.777d3c00u3KDGA

https://fr.aliexpress.com/item/2017-MIRACLE-bikes-Thru-axle-135-142mm-Available-Gravel-700C-Carbon-Bike-Frame-Gravel-Di2-Carbon/32748566553.html?spm=a2g0s.13010208.99999999.261.30453c00nw1RFM

http://www.yishunbike.com/gravel-bike-frame-with-disc-brake-carbon-bicycle-frame-g010-d_p47.html

http://www.yishunbike.com/racing-geometry-road-disc-brake-carbon-road-frame-r004-d_p45.html

http://www.yishunbike.com/700c-full-carbon-disc-brake-road-frame-kit-r093-d_p43.html

http://www.yishunbike.com/2018-oem-disc-brake-carbon-fiber-road-bicycle-frame-r007-d_p44.html

the next one is more expensive,but i live in France,there is not shipping fee,no customs fee,and I can pay in several times.

https://www.probikeshop.fr/merida-scultura-disc-5000-road-frame-black-green-2017/149710.html



all chineses frames can have custom painting for good price(around 50-80$).... for the merida it will be more expensive to paint(around 150-400€) and i don't want(know) to do it myself.


thanks for your help

They look greats but not in my budget.

All time ,money says yes or no.

I wanted the cube because it's a 2016 model and the price is good (250€).
Beacause i want to buy all parts little by little.
The aim is to build the bike for the next year.

And the big costs are frame,wheel,group.

Thank you for your link.

I don't have this frame yet.

I want to buy it next week.

Here the product feature :

Headtube diameter: Tapered 1 1/8" - 1 1/4" integrated IS41 - IS47 (Cube Headset FSA Orbit  #10360)


So,with your answer i know i can buy anything i want with 1 1/8-1 1/4.

Thank you.

Hello
I need carbon raod disc fork.

Do you have a good link with good quality ?

Thanks