Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - final forum

Pages: [1] 2 3 4
1
Really disappointed you can't order one of these frames.

2
Vendor Discussion & Reviews / Re: Thoughts on Panda Podium?
« on: April 26, 2023, 03:31:48 PM »
I'm just pumped for the L-Twoo ERX groupset. wonder when its going to be released. So tired of my Sram Force.


3
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-186
« on: April 15, 2021, 10:07:43 AM »
I keep seeing this frame on different websites. Wondering if the are all the same or some are better quality. Also what is the max tire size. I keep seeing 32 or 27. Anyone have this frame to verify?

Cheers Brad

4
Has anyone found O-Rings to work on the end caps?

Looking at https://www.competitivecyclist.com/dt-swiss-240s-conversion-end-caps

It looks like the DT swiss 240's dont have them either.

Cheers B

5
Component Deals & Selection / Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
« on: September 20, 2020, 08:37:42 PM »
So I ordered these Hubs with Beam 30mm rims and DT Swiss spokes. I'll keep you guys updated

6
Component Deals & Selection / Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
« on: September 17, 2020, 11:55:08 PM »
Right before I hit buy now, I am curious about the center lock rotor only option for the boosted hubs. You loose all the weight savings on this hub by going to a heavier center lock rotor.
For the life of me I can't find any center lock rotors even close to the 6 screw.

Can someone point me in the right direction here. I dont want to add an adapter either.

Cheers

7
Component Deals & Selection / Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
« on: September 14, 2020, 09:31:41 PM »
What did those bad boys cost you. The rims that is, what kind of XC riding are you doing? I'm pretty aggressive but only 64kg .

Cheers

8
Component Deals & Selection / Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
« on: September 14, 2020, 08:21:05 PM »
I'm very interested in these Hubs, how have they performed. I would be taking them on a large 7 day bike race and would be concerned that they ratchets would just wear out. Has anyone used the AliExpress ratchets in their DT Swiss hubs with success?

Also looking for a light 29er rim with 25mm internal if anyone have suggestions.

Cheers

9
29er / Re: Charles M06 XL build
« on: June 25, 2018, 09:24:58 AM »
I googled it and I could not find much beyond a brand called Orange that gives 1 year warranty on racing and this thread.  Don't think any brand would harm themselves by excluding racers from their warranty, racers are some of the top ambassadors for the sport.

OK, here is one for example, Giant is a fairly well known brand, but this is from their USA terms and conditions....


5. Exclusions. THE ABOVE WARRANTY, OR ANY IMPLIED WARRANTY, DOES NOT COVER NORMAL WEAR AND TEAR. ALL WARRANTIES ARE VOID IF THE BICYCLE IS MODIFIED FROM ITS ORIGINAL CONDITION OR THE BICYCLE IS USED FOR OTHER THAN NORMAL ACTIVITIES, INCLUDING, BUT NOT LIMITED TO, FAILING TO FOLLOW THE OWNER’S MANUAL OR USING THE BICYCLE FOR COMMERCIAL ACTIVITIES OR IN COMPETITIVE EVENTS, INCLUD­ING BUT NOT LIMITED TO BICYCLE RACING, BICYCLE MOTORCROSS RACING, STUNT RIDING, RAMP JUMPING OR SIMILAR ACTIVITIES, AND TRAINING FOR SUCH ACTIVITIES OR EVENTS.


Like you said before, when I read things like this, it makes me look elsewhere for a bike. This exclusion may not get used much, but knowing my luck it would happen to me.


All besides the point really, as you are trying to get support on your frame. They should at least respond to your emails. I am guessing they responded to you fairly quickly when you made queries on purchasing.

Great you shared that. I definitely look at Giant differently now. It will be good trail talk topic if I catch a friend training on a Giant bike.

My giant Trance and Reign both had a sticker on the handlebars saying this bike is designed for competition. I assume that disclaimer is for the lower end bikes.


10
29er / Re: Chinertown's Holiday Giveaway!
« on: November 23, 2017, 09:07:54 PM »
My Fav is still my IP-256

If I was to buy again I would buy CS-197 Fatbike Frame

Brad

11
Fat Bikes / Re: ns-019 fatty new build
« on: May 23, 2017, 08:08:29 AM »
I would say 4.8 tires are just fine. The rims never felt undersized. If you want to run Uber low psi either go 100mm or I believe 68mm is more then enough. .

Brad

12
29er / Re: Jar_head's WCB-M-062
« on: December 16, 2016, 08:32:21 AM »

I was lucky and got a 1310 gram wheelset, which cost me half the price of the Acros A-Wheel Wheelset I wanted to buy.
Unfortunatly the spoke nipples are red and not black as the vendor said. So it does not really match the rest of the bike.
After the first ride today at 3 °C, I can say the color isn't that bad and I can live with it  ;)







Soon there will be the 7.xx in front  :D


What wheelset did you order?. Is that weight with pedals. Ok impressive.

13
29+ & 27+ / Re: 2016 Carbon Trek Stache 29+
« on: October 23, 2016, 08:44:56 PM »
Carbon dude, Do you think your Stache would compete in a XC atmosphere? Curious as these are the trails I ride and am quite interested in getting a 29+. Or even converting my CS-019 fatbike into a 29+. Only thing is i wouldn't like the larger qfactor of the fatbike cranks on my main bike.


14
29er / Re: veld bashing, riding down stairs, or similar activities
« on: October 05, 2016, 03:24:15 PM »
057 is the most overbuilt carbon frame. It's the frame I would suggest for you
. That said I would suggest at least a front fork.  If your trying to be the SS fixie rigid hipster on the trail then ride on.

15
29er / Re: CS-MB01 ordered... It has begun!!!!!!!
« on: September 21, 2016, 07:09:06 AM »
What did you pay for the step cast fox? Interested in why you choose the best fork possible but went with GX? Not that anything is wrong with GX.

I believe the more travel the bike has the more budget % is taken up by suspension.

Pumped to see this frame built up. Looking forward for the review.

Cheers

Pages: [1] 2 3 4