If you mean sizing, the rear is 22.2x8, front might vary, mine was 21.5x8, but other guys reported 21.85x8. Better measure everything yourself to be sure.

Thanks, I have ordered 1 x 22.2x8 and 1 x 21.8x8, lets see if they fit once all the parts arrive. I asked today about the status on the frame and got the reply that is being produced.

Anyone know which bushings to order for the Manitou MacLeod for this frame with the standard fitted DU bushings on the damper ?

Hi, my first post here. Been reading alot and getting alot of tips before choosing my frame to build on since I grown tired of my current hardtail with a long chainstay and a 70" headset angel throwing me OTB way to often when I go for the more aggressive trails. Its a rocket on the easy flats but my riding style is mixed mostly XC, trails, Adventure Racing and MTB-O. For gravel and easy riding im always on my CX-bike.

Placed my order today on a 21" m06 after tossing lots of questions to Kelsey from Dengfu. The plan is to reuse all the stuff from my current hardtail (Cube ELITE SUPER HPC SLT 29 2014) and complete with a manitou macleod damper and some other stuff needed.

This is my first FS MTB build, only built a CX bike before. Will update this post as the build goes along, the goal is to build a fun FS bike hopefully under 10kg.

Pictures & Videos
https://drive.google.com/drive/folders/0B-va9X8su_l6T2xPZ1hCdmRRTXM

• Frame: Dengu m06 21"
• Front Fork: Rockshox SID XX 2014 (reuse)
• Rear Shock: Manitou MacLeod with Milo Remote
• Rear Shock Bushings (upper):Manitou 8*22.2mm
• Rear Shock Bushings (lower):Manitou 8*22.2mm
• Headset:Dengfu
• Groupset: SRAM XX1 1* 11(reuse)
• Chain: SRAM XX1
• Crankset: Race Face Next SL DM Carbon 34T 175mm (reuse)
• Bottom Bracket: RaceFace Chinch BB92 (reuse, new 201705)
• Brakes: Formula R1 Racing 180mm and 160mm (reuse)
• Pedals: Shimano XTR (reuse)
• Wheels: DT Swiss CSW MA 3.9 (reuse)
• Tires:Tubless Schwalbe Rocket Ron 29*2.25 LS Pacestar front/rear
• Rear hub adapter: DT Swiss e-true (konv x12 ==> 142*12)
• Handlebar: Syntace Vector Carbon (reuse)
• Grips: Ritchey WCS Truegrip X Locking (red)
• Stem: Syntace F109, 31,8 (reuse)
• Seatpost: CUBE Performance Motion Post. 31.6mm (reuse)
• Saddle: fi`zi:k Tundra 2 MG (reuse)
• Misc: Lizardskin black neopren chainstay guide(reuse)

First of all hi, im new to this forum !

I am an adventure racer doing 3-5 days expeditionraces where mtb biking usually is a big part of the race, it can be anything from pushing the bike trough non-bikeable terrain to 200km stages on gravel. I have during the last years used full suspension 29" bikes around 11kg but I consider for the upcoming season to build an as light as possible HT which is durable enough to withstand the bike torture Adventure racing usually is. What im looking for is a bike that is fast on long fairly easy distances but also a bike that climbs well on long easy uphills, and a drivetrain with fairly low cost components to replace. Any suggestions ? Been looking at the Workswell WCB-M-096 but its seems alot higher for the same Top Tube length so perhaps something more XC like. Budget would be around 3000$

- 29 HT frame fitting my 187 cm.
- Good quality wheels that can take a beating (love my current DT Swiss XR 1700)
- 1 * 11 , been looking at the new XT and SRAM GX (not to happy with SRAM so considering testing XT)
- 100mm travel fork