Author Topic: 29er/27,5+ boost frame  (Read 13183 times)

MVinter

29er/27,5+ boost frame
« on: September 22, 2016, 04:19:54 AM »
I'm looking for a frame for my new all-mountain/freeride bike. I really love the Intense ACV, but the price is outside my budget. Does anyone have suggestions for a FS frame in 120-160mm area, which is long and slack (65-67 degrees HA)? I also need L/XL size and many chiner frames I have only seen smal sizes.



SportingGoods

Re: 29er/27,5+ boost frame
« Reply #1 on: September 22, 2016, 07:57:58 AM »
If that frame existed I would have bought it. As far as I know there is no such frame from a (reliable) Chinese vendor.

MVinter

Re: 29er/27,5+ boost frame
« Reply #2 on: September 22, 2016, 09:31:22 AM »
I was thinking if it could be a 2016 model 29er with boost spacing i could try to find in the used marked, which have room for 27+ tires. Maybe even a 2015 model but i don't think there are any with boost... Regarding HA; i could use angleset headset to get the HA i want.

SportingGoods

Re: 29er/27,5+ boost frame
« Reply #3 on: September 22, 2016, 09:56:50 AM »
Most Chiner frames from 2015 and before were pure XC: large HA.
Also the larger rear tire you could fit is a WTB Trailblazer.

I used to get that setup, with a longer fork to reduce the HA. But that's not what you want.

2016 started to provide some frames moving to slacker HA (but not 66°) and real plus size tire fit but travel remains limited to 100 mm.

Let's cross fingers that 2017 will provide longer travel frames...

MVinter

Re: 29er/27,5+ boost frame
« Reply #4 on: September 22, 2016, 01:16:01 PM »
I was also thinking about NON-chiner models. Trek were early with boost spacing and maybe I could try to find a remedy 29 and use angleset headset to get sub 67 degrees. Do you know if there are room for 2.8-3.0 tires?

SportingGoods

Re: 29er/27,5+ boost frame
« Reply #5 on: September 23, 2016, 03:10:25 AM »
I don't know for sure but I'd think that any 29er Boost rear hub frame can accommodate 27.5x3.0" tires.

As 27.5+ is a little smaller diameter then 29" you can increase the fork travel. This reduces HA and gets the BB height back to normal. I'd say that 20 mm increase in Fork travel is OK!
« Last Edit: September 23, 2016, 03:13:00 AM by SportingGoods »

MVinter

Re: 29er/27,5+ boost frame
« Reply #6 on: September 23, 2016, 03:28:10 AM »
That was exactly what I was thinking. Combination of longer fork and angleset at -1 or -1,5 degrees, you will get a slack front. I just don't know which frames to look for... And i might not get 3" tires but 27,5x2,8 should be ok in most 29er boost frames. (?)

Maybe 2016 trek remedy 29er with, 160mm fork and -1 angleset you will get towards 66-66,5 area...

325racer

Re: 29er/27,5+ boost frame
« Reply #7 on: September 25, 2016, 07:22:25 PM »
Closest fit currently is actually a Fat Frame.  Cs-001 from Carbon Speed http://xmcarbonspeed.com/Productinfo.asp?f=1402

I was looking for a plus frame for my father,  something similar to Sanata Cruz Hightower, Rocky Mtn Pipeline.  He ended up finding a Hightower on sale, it's an awesome bike to ride.

If he hadn't found the Santa Cruz on sale, probably would have built a CS-001 as a 27.5+.

MVinter

Re: 29er/27,5+ boost frame
« Reply #8 on: September 25, 2016, 11:18:52 PM »
This frame have wider q-factor (which i don't like) and the spacing is not boost. I currently have 27,5+ wheelset with boost spacing on a hardtail an I want to change between the bikes...

325racer

Re: 29er/27,5+ boost frame
« Reply #9 on: September 26, 2016, 05:23:43 PM »
You didn't mention those requirements.

I looked around a lot for something like you're asking about.

Nothing quite fits as of 2 months ago.  As mentioned the CS-001 has all the right dimensions, except axle spacing and quality factor.


MVinter

Re: 29er/27,5+ boost frame
« Reply #10 on: October 06, 2016, 12:43:06 PM »
I have looked at Pivot 429 trail. It's not as slack and maybe a bit less travel than i want... but it's looks like a very firm and fun ride, short and nimble, which reviews agree in!

What are you thinking?

MVinter

Re: 29er/27,5+ boost frame
« Reply #11 on: October 08, 2016, 10:55:59 AM »
By the way. I came across this bike during some searches i did... https://www.edge-design.com.tw/Spec-PYRENEES%2029ER%20AM%20PRO%20150.html

I'm waiting feedback on rear spacing, and if the HA of 69 degrees are correct. If HA is 69 and no rear boost, I will continue the seach...

Bhaalgorn

Re: 29er/27,5+ boost frame
« Reply #12 on: December 29, 2016, 08:50:59 AM »
Looks like this will fit the bill:
http://www.xmcarbonspeed.com/Productinfo.asp?f=1438

Any feedback on boost-compatible hard tails? Peter has a few it seems:

http://www.xmcarbonspeed.com/Productinfo.asp?f=1414
http://www.xmcarbonspeed.com/Productinfo.asp?f=1460

MVinter

Re: 29er/27,5+ boost frame
« Reply #13 on: January 03, 2017, 12:29:51 PM »
Looks like this almost could do it, but not quite... It's something stange with the rear shock figures. 165x45 is not a rear shock that i have seen. What do you think?

I love slack HA and the travel amount it ok, but I would have liked to see another shock spacing...

Carbon_Dude

Re: 29er/27,5+ boost frame
« Reply #14 on: January 06, 2017, 11:45:34 AM »
I seriously considered buying this frame through Peter when I was contemplating building a FS Chiner plus bike.  So far it's my favorite FS plus bike frame available through the direct market.
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA