Author Topic: How Things Work: Freehub Body  (Read 3515 times)

Carbon_Dude

How Things Work: Freehub Body
« on: April 20, 2017, 09:23:21 AM »
Some good info on freehub bodies.  You can see why I think DT Swiss makes a good design, especially for the money.  However, if money was not an issue, Chris King hubs are truly amazing and I can see why they are so expensive.

https://dirtmountainbike.com/features/work-freehub-body.html


2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

MTB2223

Re: How Things Work: Freehub Body
« Reply #1 on: April 21, 2017, 02:49:46 AM »
Nice information! Thanks

carbonazza

Re: How Things Work: Freehub Body
« Reply #2 on: April 21, 2017, 08:10:59 AM »
Very good article. Thanks!

By the way, do you know why my DT Swiss rear hub lost its total silence?
Is it just grease? Do you put it often?

Sitar_Ned

Re: How Things Work: Freehub Body
« Reply #3 on: April 21, 2017, 08:15:59 AM »
Very insightful article.. Thanks for posting.

Carbon_Dude

Re: How Things Work: Freehub Body
« Reply #4 on: April 23, 2017, 10:34:53 AM »
Very good article. Thanks!

By the way, do you know why my DT Swiss rear hub lost its total silence?
Is it just grease? Do you put it often?

I would assume it just needs to be re-greased or have the correct grease.  DT Swiss makes special star ratchet grease that is a particular viscosity which gives the star ratchet just the right amount of sound.  Once I used Park Tools grease and the hub got very quiet.  If the freehub is very noisy I would assume that it's just dry and needs lubricant.
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

outriding9800

Re: How Things Work: Freehub Body
« Reply #5 on: April 23, 2017, 07:54:57 PM »
I have had a king hub a long time ago and i will never get another one.

It loosen up at the worst time and it required special tools. i sent it back to king for review and they found no issues with it.

I got rid of it.

But i had a hugi hub (the same star ratchet and it predated the dt swiss) i beat the crap out of it for several years with no maintenance. the star ratchet finally gave way. I was happy with the number of miles i had on my hugi.

outriding9800

Re: How Things Work: Freehub Body
« Reply #6 on: April 23, 2017, 08:05:24 PM »
Very good article. Thanks!

By the way, do you know why my DT Swiss rear hub lost its total silence?
Is it just grease? Do you put it often?

When i rebuilt my 350 hub a year ago i put 70w-90 redline gear lube (probably any high quality gear lube will be fine)

But with grease it is sometimes slows down the engagement  and the teeth will not fully engage and could cause the teeth to strip out.