Author Topic: BB options for IP-036  (Read 2696 times)

arrjay

BB options for IP-036
« on: August 09, 2014, 02:54:37 AM »
On my IP-036 build, I'd like to use my current SRAM XX crankset (GXP).  I installed Praxis' conversion BB, only to find that my frame has a 68mm BB (opposed to the 73mm MTB "standard").  I highly recommend Praxis, this was the fault of my ignorance.

Lesson now learned, what can I do for a BB?  I'd like to use my current cranks.  I use a single chainring (1x) setup.  And though I'd love to convert to 1x11 the whole goal of using parts from my previous rig, and even buying chinercarbon, is to keep costs low...

What do you guys use on your builds?



Carbon_Dude

Re: BB options for IP-036
« Reply #1 on: August 09, 2014, 08:35:05 AM »
Sorry, I am unable to be of much help.  Both my Chiners have BSA BB and SRAM XX1 GXP cranks.
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

Gliderboy

Re: BB options for IP-036
« Reply #2 on: August 10, 2014, 11:06:18 AM »
Just to be sure Arrjay - the shaft on your crank is to long?

/Jan
Fully MTB IP-036 in 2016 - Gravel GR-002 in 2021

brmeyer135

Re: BB options for IP-036
« Reply #3 on: August 10, 2014, 11:39:41 AM »
and what is your current BB?

arrjay

Re: BB options for IP-036
« Reply #4 on: August 11, 2014, 11:30:02 AM »
The shaft on my current crank is the correct size.  My previous BB was BSA with 68mm shell width (Niner did this for a couple years on the Air9).  So my issue is finding a solution that can convert PF30 at 68mm shell width that can accommodate a GXP spindle.

Problem Solvers may have . . . err, solved my problem:
http://www.bikewagon.com/problem-solvers-abnormal-46-bottom-bracket-24-22mm-gxp-spindles?CAWELAID=400006350000138451&CAGPSPN=pla&catargetid=400006350000349065&cadevice=c&gclid=CJzd5aS4i8ACFc1_Mgod5kwANg


arrjay

Re: BB options for IP-036
« Reply #5 on: August 19, 2014, 04:56:30 PM »
Update:

Ordered the Problem Solvers A46 (CR0095 for SRAM/GXP, CR0094 for Shimano) and successfully installed this weekend. 

So now I'm running my "old" (thank you manufactured obsolescence) SRAM XX GXP crankset on my PF30 68mm shell width frame!  Success!

The exploded-view on the install instructions was slightly cryptic and required pressing the GXP-specific (provided) adapter into the Non-Drive side, then pressing in each side of the BB, but things are looking good now.  I even had an email exchange with Problem Solvers support to confirm I did things correctly.

If anyone has some questions about this feel free to PM me, or PS customer support directly.

Sussed.

Re: BB options for IP-036
« Reply #6 on: August 20, 2014, 02:38:31 AM »
Great work ! Good to see you got it sorted, are you close to finishing your build now ?   8)