Author Topic: Stumpjumper clone  (Read 56883 times)

WozCuz

Stumpjumper clone
« on: September 10, 2020, 03:16:51 PM »
Just spotted this pop up on AliExpress

£562.82 | 2021 MTB EVO Frame Mountain-Bike-Frame Carbon-Suspension-Frame Boost-148mm 29er New MTB XC AM ENDURO Frameset
https://a.aliexpress.com/_mKHLIEx

Info seems all wrong and contains a lot of pictures of shoes. But managed to find their website (I think)
 https://amp.obmbicycle.com/Carbon-frame-chameleon-frame-manufacturers-wholesale-carbon-frame-chameleon-frame-c66239/

Anyone dealt with OBM Bicycle before? Wondering whether its worth a shot




scourge

Re: Stumpjumper clone
« Reply #1 on: September 10, 2020, 04:29:11 PM »
Interesting.  I had a Stumpjumper ST that was an enigma. Looking at in on paper, the reach was way too short. I wouldn't even consider a bike with that reach today. But everytime I got on it, it felt great. I also had extremely lower level suspension on it, but it ate up everything.  It was to the point I asked the shop where I bought it if they did some special tune on the fork. They thought I was crazy.

Also whenever I went up hill I could feel a lot of bobbing. I always thought it was eating up all my speed. But then I would check Strava and despite the feel, I was really moving up the hill. I never understood how that bike should have sucked, but felt so great. I loved it. And I dont like Specialized really. Ive demoed super expensive bikes, and I liked the cheap Stumpy ST as much as all of them.

That EVO clone is kind of interesting.
« Last Edit: September 10, 2020, 07:29:46 PM by scourge »

emu26

Re: Stumpjumper clone
« Reply #2 on: September 10, 2020, 04:31:18 PM »
Too light for my liking.

RobertRinAustin

Re: Stumpjumper clone
« Reply #3 on: September 10, 2020, 07:55:24 PM »
Looks interesting, but didn't see much info, geo, travel...

chetosmachine

Re: Stumpjumper clone
« Reply #4 on: September 11, 2020, 01:39:19 PM »
Geo

Bajker

Re: Stumpjumper clone
« Reply #5 on: September 11, 2020, 03:55:50 PM »
If that geo is correct this the normal stumpjumper, so not evo, also missing size XL.

WozCuz

Re: Stumpjumper clone
« Reply #6 on: September 11, 2020, 04:55:54 PM »
If that geo is correct this the normal stumpjumper, so not evo, also missing size XL.

Yeah it doesn't seem like the correct geometry for the evo. I've also tried asking some questions about the frame, sizings, shocks etc on AliExpress and not really got anywhere yet.

Bajker

Re: Stumpjumper clone
« Reply #7 on: September 11, 2020, 07:06:23 PM »
Found this seller aswell with 7 sold :O
https://aliexpress.com/item/4000538567754.html

This seems to be their website with geo chart for EVO frame, confusing... (edit: this might not be the same store  or frame, I googled AWST Cycling Tactics Store and found this website on a twitter account with the same name).
https://www.allstarbicycle.com/275-stumpjumper-evo-carbon-suspension-frameset-29er-p2721049.html
« Last Edit: September 11, 2020, 07:29:51 PM by Bajker »

emu26

Re: Stumpjumper clone
« Reply #8 on: September 14, 2020, 01:49:36 AM »
Found this seller aswell with 7 sold :O
https://aliexpress.com/item/4000538567754.html

This seems to be their website with geo chart for EVO frame, confusing... (edit: this might not be the same store  or frame, I googled AWST Cycling Tactics Store and found this website on a twitter account with the same name).
https://www.allstarbicycle.com/275-stumpjumper-evo-carbon-suspension-frameset-29er-p2721049.html

The numbers on that aliexpress one are all over the place. The drawing shows BB drop or 52mm, the table shows 33, drawing shows reach as 419, table shows 425, table shows HA 66.5, drawing 65.9 etc etc.

Also the Aliexpress one claims T1000, the other link says T1100

Colt__Seavers

Re: Stumpjumper clone
« Reply #9 on: September 24, 2020, 01:42:14 AM »
woule love to see someone pulling the trigger on this one

Jotegr

Re: Stumpjumper clone
« Reply #10 on: September 24, 2020, 02:06:21 PM »
I'd love to see this frame off a more reputable/common reseller. I've been out of the game too long to pick one of these up from a random reseller/aliexpress.


Edit: Also the frame doesn't have water bottle bolts. Hope that's not an oversight!

Double edit: Shock eye to eye is that of the lousy stumpjumper ST. Unless it's actually 210x50-55 or so, it's an ST.  If the numbers were less out to lunch, then I might be interested in a medium.
« Last Edit: September 27, 2020, 10:35:15 PM by Jotegr »

Thrill21

Re: Stumpjumper clone
« Reply #11 on: October 19, 2020, 06:01:23 AM »
The geo is a little inconsistent for sure. I did a little digging around about this frame (love the look of the stumpy) very similar to the new Stumpy so somehow they got their hands of the moulds and were able to build pretty quickly. I got in contact with this company https://www.allstarbicycle.com and spoke to someone via whatsapp. Pretty good deal for the frame $700 CDN. Still thinking this one over as that Santa Cruz looks pretty good too

Jotegr

Re: Stumpjumper clone
« Reply #12 on: October 19, 2020, 09:38:50 AM »
The geo is a little inconsistent for sure. I did a little digging around about this frame (love the look of the stumpy) very similar to the new Stumpy so somehow they got their hands of the moulds and were able to build pretty quickly. I got in contact with this company https://www.allstarbicycle.com and spoke to someone via whatsapp. Pretty good deal for the frame $700 CDN. Still thinking this one over as that Santa Cruz looks pretty good too

It looks like the outgoing stumpy. Go for it!

dopestar

Re: Stumpjumper clone
« Reply #13 on: October 26, 2020, 04:05:51 PM »
The geo is a little inconsistent for sure. I did a little digging around about this frame (love the look of the stumpy) very similar to the new Stumpy so somehow they got their hands of the moulds and were able to build pretty quickly. I got in contact with this company https://www.allstarbicycle.com and spoke to someone via whatsapp. Pretty good deal for the frame $700 CDN. Still thinking this one over as that Santa Cruz looks pretty good too


Do you have a feedback or review about the allstarbicycle website? I am interested in their Specialized Epic frame

scourge

Re: Stumpjumper clone
« Reply #14 on: October 26, 2020, 04:33:23 PM »
Yeah it looks like the old Stumpy, unless you found a source with the new Stumpy frame. I'd be pretty interested in the new frame.