Author Topic: Velo Build R-099 Build  (Read 38176 times)

Snacks

Re: Velo Build R-099 Build
« Reply #30 on: March 07, 2021, 04:05:24 PM »
ahh yea my bad, i just realized that the one i saw was too narrow. possibly thats for an MTB frame.

FHS

Re: Velo Build R-099 Build
« Reply #31 on: March 07, 2021, 06:18:13 PM »
ahh yea my bad, i just realized that the one i saw was too narrow. possibly thats for an MTB frame.

No worries, sorting through all the standards, then who makes which standard in which flavor is dizzying.

I did complete the install of both the new Wheels MFG SRAM DUB BB86/92 bottom bracket and the new power meter on my Tantan X21. Pretty straighforward, no issues whatsoever with either install. Had some minor front derailleur adjustmens that amounted to a couple of turns on upper and lower limit screws. I had two decent rides over the weekend and no issues on the road.

Considering that the VB-099 and the X21 are pretty much clones of each other, i'd imagine the BB set up would work on the VB-099 for anybody looking for a SRAM DUB crankset.

robvincep

Re: Velo Build R-099 Build
« Reply #32 on: March 08, 2021, 11:37:48 AM »
My VeloBuild arrived last week and I just got it built up. Its great, the construction seems really good. everything was precise and in the right places. There were definitely a couple little details that had been overlooked. For example, it would have been really helpful to have a shift cable race under the bottom bracket but instead it was just a hole. Which means that you have to remove the BB to replace the front shift cable. But this is at the end of the day a little thing. Overall, really good experience. Excited to get a sense of how it rides after getting a couple 100 miles on it.

Zoc

Re: Velo Build R-099 Build
« Reply #33 on: March 09, 2021, 01:46:06 AM »
awesome bike, congratulations

and also cool flat :)

Snacks

Re: Velo Build R-099 Build
« Reply #34 on: March 09, 2021, 12:43:09 PM »
ohh very nice bike! hope you'll have as much fun riding that as i have had with mine

fcs01

Re: Velo Build R-099 Build
« Reply #35 on: March 09, 2021, 01:00:26 PM »
Hi
Did anyone here had problems with a play in the headset?

FHS

Re: Velo Build R-099 Build
« Reply #36 on: March 09, 2021, 01:35:03 PM »
Hi
Did anyone here had problems with a play in the headset?

1) Check your steerer tube length. You may not have left enough space to compress the headset.
2) Check your compression ring to make sure it's seated properly.
3) Check your compression plug to see if it's slipping.
4) If you're locking up your steering but still getting play in your headset, check to see if you have too much space between your top cover and compression ring.

For 1, I just used a spacer above the stem. For 2, the compression ring was seating fine most of the time, but it was frustrating enough that I got a new headset with a different compression ring. For 3, I had to use a different compression plug.

When all those were taken care of, I started locking up the steering trying to tighten the headset, so it was progress at least. My LBS sold me some spacers that sit above the compression ring. That finally did the trick.

njansen

Re: Velo Build R-099 Build
« Reply #37 on: March 10, 2021, 11:54:59 AM »
My VeloBuild arrived last week and I just got it built up. Its great, the construction seems really good. everything was precise and in the right places. There were definitely a couple little details that had been overlooked. For example, it would have been really helpful to have a shift cable race under the bottom bracket but instead it was just a hole. Which means that you have to remove the BB to replace the front shift cable. But this is at the end of the day a little thing. Overall, really good experience. Excited to get a sense of how it rides after getting a couple 100 miles on it.

Nice bike! Did they paint the seatpost for you? Didn't know that was possible.

I'm currently working on my R-099. My very first project without any experience. But so far lot's of fun!
See: https://roadmeister.cc for the progress.

My VeloBuild 099 project:
https://roadmeister.cc

robvincep

Re: Velo Build R-099 Build
« Reply #38 on: March 11, 2021, 05:01:32 PM »
Nice bike! Did they paint the seatpost for you? Didn't know that was possible.

I'm currently working on my R-099. My very first project without any experience. But so far lot's of fun!
See: https://roadmeister.cc for the progress.

Yeah, I saw an example on the site and thought it looked good so I just asked and they were able to do it. I they could have done the bars too but I liked them black.


hazzer19

Re: Velo Build R-099 Build
« Reply #39 on: March 16, 2021, 02:05:49 PM »
My VeloBuild arrived last week and I just got it built up. Its great, the construction seems really good. everything was precise and in the right places. There were definitely a couple little details that had been overlooked. For example, it would have been really helpful to have a shift cable race under the bottom bracket but instead it was just a hole. Which means that you have to remove the BB to replace the front shift cable. But this is at the end of the day a little thing. Overall, really good experience. Excited to get a sense of how it rides after getting a couple 100 miles on it.

Great looking build. How does it ride so far?

njansen

Re: Velo Build R-099 Build
« Reply #40 on: March 21, 2021, 11:52:52 AM »
Project finished! Did a quick 25km test ride today and my first impression was absolutely great. Will update on my experience again when I've done some more rides.

See https://roadmeister.cc for more info.



See https://roadmeister.cc for more info.
My VeloBuild 099 project:
https://roadmeister.cc

robvincep

Re: Velo Build R-099 Build
« Reply #41 on: March 21, 2021, 02:47:36 PM »
Great looking build. How does it ride so far?

Rides reallyyy well. Still fiddling with the disc rotor alignment and derailleur indexing a little but that is to be expected. Teething. Only thing that has sucked are those TT pro tyres. Two punctures in 100mi??

Nicoloc

Re: Velo Build R-099 Build
« Reply #42 on: March 21, 2021, 03:16:43 PM »
Wow, I love your website

hazzer19

Re: Velo Build R-099 Build
« Reply #43 on: March 28, 2021, 11:16:08 PM »
Rides reallyyy well. Still fiddling with the disc rotor alignment and derailleur indexing a little but that is to be expected. Teething. Only thing that has sucked are those TT pro tyres. Two punctures in 100mi??

Awesome and it sounds like it's time for tubeless!

hazzer19

Re: Velo Build R-099 Build
« Reply #44 on: March 28, 2021, 11:17:31 PM »
Project finished! Did a quick 25km test ride today and my first impression was absolutely great. Will update on my experience again when I've done some more rides.

See https://roadmeister.cc for more info.



See https://roadmeister.cc for more info.

Are you planning on posting any more build videos!