Airwolf YFR068 - 2023 Gravel Frame

[frankpaul1]

I bought some Loctite. Will let you know the results. The bonded insert looks interesting as well, but I don't know if the fork is 100% identical.

[BeePiers]

It’s probably not. I’ve learned how to really use my belt sander for honing parts that otherwise didn’t Fit just right

[xzoahx]

I've seen several mentions about tires ~45mm, I'll add some of my own experiments:
 I'm a fan of 2x AXS and I managed to bypass the limitations of the non-wide front derailleur (42c max) and install a Speedero 44 in the rear (45.5mm with 24 hook inn).
 The Airwolf frame itself is indeed similar to Aspero in terms of tire clearance - I got acceptable gaps of 4mm in the chainstays.
 As for the front AXS derailleur - I managed to get a +2mm tire clearance extension in the battery area (3.5mm in total) by making a spacer for the front derailleur mount, and derailleur frame remained within adjustment tolerances for the combination with non-wide Red + 43-30 rings.

[Phaxe]

I've seen several mentions about tires ~45mm, I'll add some of my own experiments:
 I'm a fan of 2x AXS and I managed to bypass the limitations of the non-wide front derailleur (42c max) and install a Speedero 44 in the rear (45.5mm with 24 hook inn).
 The Airwolf frame itself is indeed similar to Aspero in terms of tire clearance - I got acceptable gaps of 4mm in the chainstays.
 As for the front AXS derailleur - I managed to get a +2mm tire clearance extension in the battery area (3.5mm in total) by making a spacer for the front derailleur mount, and derailleur frame remained within adjustment tolerances for the combination with non-wide Red + 43-30 rings.

This is why I love this forum - ingenuity at its best. What material did you use for the 3D print?

[xzoahx]

This is why I love this forum - ingenuity at its best. What material did you use for the 3D print?

I just asked for a black and cheaper one from a guy on a local classifieds board. Probably something like ABS or PLA.

if you are interested, I printed another interesting thing for testing - a copy of the bike computer and accessories holder [@hinloopen.design], but of my own design

[Marone]

I would like to install a mech. GRX 810 rear derailleur. There are two different SL7 derailleur hangers for direct mount: S182600001 and S182600003. Which of them is the one I need for the YFR068?