Author Topic: Recommendations for integrated handlebar?  (Read 12177 times)

UrgentDelay

Re: Recommendations for integrated handlebar?
« Reply #15 on: April 14, 2024, 06:53:47 AM »
The Kocevlo and Ullicyc are the same bar and they are both copies of The One Pro with a different clamp design, but the stem and bars are the same. I bought both The One Pro and Kocevlo bars and they are identical apart from the steerer clamp. The One Pro were about 25g lighter (370g vs 395g); whether that's the clamp design (likely) or a different carbon layup, I couldn't tell any difference between the two. In the end, I went with the Kocevlo due to being half the price. They've been on my bike since May (you can search my posts) and I've raced them a dozen times or so. I like them and would buy again. They're plenty stiff for me and I'm around 85kg and can put out 1600W peak in a sprint. No flex I can feel. Finish is on par for AliEx bars and I don't have any safety concerns even at my weight. I ran mech 1x and now Di2, no issues with cable routing apart from the usual annoyances of fully internal bars. Couldn't tell you if they could handle 2x mech but they look to have ample room albeit a little tight.

So the consensus seems to be, that the Kocevlo bars are the way to go. Would you rate the stiffness on the same level vs The One? The 25g weight difference would be totally worth it if the build quality is the same overall.

TidyDinosaur

Re: Recommendations for integrated handlebar?
« Reply #16 on: April 14, 2024, 12:18:41 PM »
Hygge uses the Kocevlo bars on their Model S, So I have one. Routing the 4 cables for mechanical shifting is no problem (with the routing kit)

dsveddy

Re: Recommendations for integrated handlebar?
« Reply #17 on: April 15, 2024, 08:34:26 AM »
I have a set of Avian falcons, very much worth the price. Super light, quite stiff, available in your spec.

ausmtb8989

Re: Recommendations for integrated handlebar?
« Reply #18 on: April 17, 2024, 05:37:19 AM »
thinking about this, bit more pricey.  anyone has experience with them?

https://www.lightcarbon.com/super-light-carbon-road-integrated-aero-handlebar_p226.html

TidyDinosaur

Re: Recommendations for integrated handlebar?
« Reply #19 on: April 17, 2024, 07:12:15 AM »
thinking about this, bit more pricey.  anyone has experience with them?

https://www.lightcarbon.com/super-light-carbon-road-integrated-aero-handlebar_p226.html

How much are they? They are quite light I see

bremerradkurier

Re: Recommendations for integrated handlebar?
« Reply #20 on: April 17, 2024, 10:19:38 AM »
Also happy with the Kocevlo bar and the logo comes off nicely.

It's a little fiddly, but a Di2 junction box can be zip tied to the included computer mount for those not running fully internal cables.



ausmtb8989

Re: Recommendations for integrated handlebar?
« Reply #23 on: April 24, 2024, 09:58:56 AM »
A lot of people here are using and liking the Kocevlo bars. They are about 60eur in sale. Mine are 350gr in 380/80

just learnt i need OD2 compatibility for a giant fork steerer

Linsook

Re: Recommendations for integrated handlebar?
« Reply #24 on: April 25, 2024, 10:36:12 AM »
Just arrived in the mail. I haven't ridden on it yet but looks nice, very stiff.  Only complaint about it, is the top cap area, there's room for improvement on the fit of that.  Got this for $120 USD.

https://a.aliexpress.com/_mrMR6l4
« Last Edit: April 27, 2024, 07:12:14 PM by Linsook »

numberzero

Re: Recommendations for integrated handlebar?
« Reply #25 on: April 27, 2024, 06:25:54 AM »
I recently bought a roval sl8 handlebar copy on aliexpress. I get it for 100$ with all accessories included.

Quality is here, i just found the marks for hood position are not aligned but who really cares, screw for computer mount is to change if you want to have a good tightening without destroying it and interface between bar and mount is probably better made on the original too but it works.

About weight, it's light, mine is 325g for 400x100.
Rigidity is here on tops, i found hoods flex more than a alloy bar.

If you want to buy it, have in mind that exit hole is really small for 4 cables, i think like the original, it's made for electronic shifting.
Beware of the shape that is flat and wide on the top if you like this hand position.

I bought it on"hyyd sporting goods Store" which seems to have the lowest price with plenty of dimensions available.

Eddy_Twerckx

Re: Recommendations for integrated handlebar?
« Reply #26 on: May 03, 2024, 09:04:31 AM »
Just arrived in the mail. I haven't ridden on it yet but looks nice, very stiff.  Only complaint about it, is the top cap area, there's room for improvement on the fit of that.  Got this for $120 USD.

https://a.aliexpress.com/_mrMR6l4

Any updates?  These look nice. Trying to find a narrow 36 cockpit and it’s hard to find my needed stem length of 120mm. Just looking for a 1-piece that isn’t a noodle and comes in narrow/long sizes.

carbonazza

Re: Recommendations for integrated handlebar?
« Reply #27 on: May 03, 2024, 09:36:03 AM »
Just arrived in the mail. I haven't ridden on it yet but looks nice, very stiff.  Only complaint about it, is the top cap area, there's room for improvement on the fit of that.  Got this for $120 USD.

https://a.aliexpress.com/_mrMR6l4

A pity for their top cap...  I'm about to try the gravel version for a new build:
https://www.aliexpress.com/item/1005004788375665.html

bremerradkurier

Re: Recommendations for integrated handlebar?
« Reply #28 on: May 07, 2024, 10:25:41 AM »
A pity for their top cap...  I'm about to try the gravel version for a new build:
https://www.aliexpress.com/item/1005004788375665.html

I used a credit card in the forward gap between cap and stem to avoid keep the cap edge parallel to the stem edge.

Linsook

Re: Recommendations for integrated handlebar?
« Reply #29 on: May 09, 2024, 09:30:28 AM »
Any updates?  These look nice. Trying to find a narrow 36 cockpit and it’s hard to find my needed stem length of 120mm. Just looking for a 1-piece that isn’t a noodle and comes in narrow/long sizes.

So far so good.  Had to use carbon paste on both sides of the spacer insert and torque it up to 7-8nm to stop it from moving.  Might be an issue with my fork, I seem to always have this problem. 

Rigid under high load so has an assured feel when putting down the watts.  Looks great also.  Top cap is unfortunate lol.  I'm thinking about shaving down some material myself to make it sit better.  The provided aluminum bike mount is great, really firm and has several optional attachments. 

Would I recommend this?  Yes and no, the only problem being the top cap, if you can overlook that, it's a solid handlebar.
« Last Edit: May 09, 2024, 09:44:54 AM by Linsook »