WheelTop EDS TX Full Wireless Groupset (Chinese SRAM)

[biceryder]

Awesome!  look forward to hearing about this.

[Nomuetze]

I m using magura post mount calipers with magura hose,  on lever side i will use wheeltop olive but not sure about pin, should i use wheeltop one/ that should be inbetween sizes of bh59 and bh90? Or should i go with bh59 despite being slightly thicker.

I have read that magura pin is too ong for shimano levers and damage can happen, can it fit wheeltop levers properly?

From what I see I would not recommend using magura pin on wheeltop levers…as it’s designed around bh59/90 shimano standard … I’d rather use wheeltop insert/pin on the lever side…

[dolph]

I installed the wheeltop eds gex on my steelbike, previously on rival1 11 speed and later 12speed with ratio kit... no luck going to smallest sprocket, with all the tension removed from the H screw and all microadjust to the limit in initial setup it s hesitant to go to smallest sprocket, installed the waser( RD and hanger bolt) that came with it, I found a solution that I don't like... unscrewing the RD bolt from the hanger makes it go further slightly and it works properly.

My cassete is a sunrace 12 speed 11-50 on a hg freehub, is it safe to add more spacers to make it go outwards? it's alreadytight, no loose sprockets, is adding wasers to the RD and hanger interface safe?

I will check if the issue is the specific frame, so i will pop the deraileur on my mtb and road bike and check.

From what I see I would not recommend using magura pin on wheeltop levers…as it’s designed around bh59/90 shimano standard … I’d rather use wheeltop insert/pin on the lever side…

I will install wheeltop everything on the lever side, thanks!