Winowsports NEW Carbon TT Rest Extension Handlebar ARB02 and TT handlebar HB052

[Kitty_BIKE]

Hi friends, I'm Kitty from Winowsports.
  We have launched a new carbon fiber TT rest extension handlebar (ARB02). It is suitable for Di2. We have adopted a new forging pattern painting, accepting matte or glossy.
  We will also release a mechanical version later, so stay tuned. The matching computer mount is still in design and will be available at the end of November.
  We have now opened pre-sale on AliExpress and will ship in about 10 days. If you need it, you can go to AliExpress to order it.

Product link1: https://www.aliexpress.com/item/3256807757953578.html?spm

  In addition, we also have a complete tt handlebar (HB052) for sale that matches ARB02. The HB052 aero handlebar is also a new model, 400/420MM optional, and 370MM is still in production.

Product link2: https://www.aliexpress.com/item/3256807785245557.html?gatewayAdapt=4itemAdapt

[Kitty_BIKE]

Here are the product specifications.

[Barry McCockiner]

Ordered a set and really looking forward to seeing/using them.

They look a lot like ones on the market sold under the brand FastTT Bikes. Do you by chance supply these to that brand?

[mtm]

They look interesting!

I can't quite get the measurements provided to line up with the actual pictures. Is it possible to maybe get some pictures where it's measured with a ruler or similar on the picture? Especially the length from back to tip (without the round part) and the width of the arm rests would be nice to get confirmed like that if possible. See picture for the two measurements.

Thanks in advance for any help.

[Kitty_BIKE]

Hello friend, 360MM is correct, it just has some viewing angle issues. The width is about 105MM. Please allow a little error due to manual measurement.

[Kitty_BIKE]

width 105MM

[mtm]

Thanks for that, very appreciated

Unfortunately that seems a too long for me by ~5 cm. Crossing fingers you might make a shorter version one day

[Cnasta]

I would like to buy these. However, only if there is a good Garmin mount available. Also I would like a BTA solution (adapter/mounting plate). Will have to suite a Giant Trinity.

[BadIdeasMakeGoodStories]

Can you share any photos of the matching computer mount? These appear to be a near clone of the FastTT bars, but those use a threaded insert on the right extension that are missing here.

[Kitty_BIKE]

Thanks for that, very appreciated

Unfortunately that seems a too long for me by ~5 cm. Crossing fingers you might make a shorter version one day

The medium size one has already started preparation.

[Kitty_BIKE]

I would like to buy these. However, only if there is a good Garmin mount available. Also I would like a BTA solution (adapter/mounting plate). Will have to suite a Giant Trinity.

hi friend，Stay tuned, a adapter mount is in the works.

[Kitty_BIKE]

Can you share any photos of the matching computer mount? These appear to be a near clone of the FastTT bars, but those use a threaded insert on the right extension that are missing here.

Hi friend,please check. We recommend using our matching computer mount.

[Kitty_BIKE]

Ordered a set and really looking forward to seeing/using them.

They look a lot like ones on the market sold under the brand FastTT Bikes. Do you by chance supply these to that brand?

Thanks for your order.

[Cnasta]

hi friend，Stay tuned, a adapter mount is in the works.

That looks really interesting, but how do you align the mount if you turn the bars (they can be moved a bit, inward/outward from centre)?

[Kitty_BIKE]

That looks really interesting, but how do you align the mount if you turn the bars (they can be moved a bit, inward/outward from centre)?

You can refer to this picture.