Author Topic: Seat Post and handlebars  (Read 7847 times)

byrt

Seat Post and handlebars
« on: May 20, 2015, 06:19:11 AM »
Hi Everyone
How many of you have a carbon Seat post and Stem with handlebars carbon? Are there safe? will they crack?
Im just a bit worried.



MTB2223

Re: Seat Post and handlebars
« Reply #1 on: May 20, 2015, 06:21:55 AM »
I've got a carbon seatpost, stem and handlebar. Bought it on AliExpress and no issues with it, except the saddle clamp of the seat post became loose (see http://chinertown.com/index.php/topic,184.msg2838.html#msg2838 ).
It's strong and light enough. no worries.

Carbon_Dude

Re: Seat Post and handlebars
« Reply #2 on: May 20, 2015, 08:27:33 AM »
I have 3 sets of bars and a seatpost, no stems though (just not much weight savings going cabon).  No issues, light and inexpensive.
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

carbonazza

Re: Seat Post and handlebars
« Reply #3 on: May 20, 2015, 03:57:35 PM »
When something breaks, people are vocal about it the forums.
If you look after them, you will surely find broken carbon parts reports.

However the silent majority of us here have no problem with our Chinese seatpost, stem and bars.
I guess, we all order the frame, then look around on the vendor web site.
See those cheap parts that will come in the same box as the frame, so we try and stick with them.



325racer

Re: Seat Post and handlebars
« Reply #4 on: May 21, 2015, 10:57:01 AM »
I have carbon seat post and bar from XmiPlay from when I ordered my frame.  No issues.  Occasionally I'll get a big crunch/creak from the seat post, but that happens on my Reverb too. 

I'm about 230 fully kitted out, riding full rigid in stuff that most are on full suspension.

Did not do Carbon stem for the above mentioned not worth it for the weight.
« Last Edit: May 21, 2015, 10:58:59 AM by 325racer »

cmh

Re: Seat Post and handlebars
« Reply #5 on: May 21, 2015, 09:00:13 PM »
I have carbon seat post and bar from XmiPlay from when I ordered my frame.  No issues.  Occasionally I'll get a big crunch/creak from the seat post, but that happens on my Reverb too. 

I'm about 230 fully kitted out, riding full rigid in stuff that most are on full suspension.

Did not do Carbon stem for the above mentioned not worth it for the weight.

Got carbon bars and seat post - but turns out I needed a 400mm post and only ordered a 350 so it just sits there now. :)

Bars have been fine, although the angle on them seems strange. Also got risers and they seem to rise more than I might have expected. Still, light, and no issues.

cernymuz

Re: Seat Post and handlebars
« Reply #6 on: May 23, 2015, 01:55:45 AM »
I got cheap carbon bars off aliexpress. I haven't ridden them yet, however I did a "test" by clamping them in a stem and hanging onto them, doing pull-ups and generally shaking myself. They did not even start to flex, so I would say they are quite strong

TedS123

Re: Seat Post and handlebars
« Reply #7 on: June 21, 2015, 04:37:17 PM »
Can anyone tell what sweep angle these bars have? That info seems to be missing on most of the ones I've seen. Looking for something like the standard 9 - 10 degrees...

Nina

Re: Seat Post and handlebars
« Reply #8 on: August 26, 2015, 10:48:24 PM »
I search some information on internet and find out good stem with handlebar carbon is really important to you if you want to ride bicycle comfortably you must consider carefully. The properties of carbon fibers, such as high stiffness, high tensile strength, low weight, high chemical resistance,  high temperature tolerance and low thermal expansion. So you  needn't  worry about that. Good quality will not crack! I also look through an website I think you will be interested in http://www.windsailbike.com/carbon-handlebars;D ;D
« Last Edit: August 26, 2015, 11:13:33 PM by Nina »

bxcc

Re: Seat Post and handlebars
« Reply #9 on: August 31, 2015, 03:54:18 PM »
Just to keep the thread going, I ordered a 27.2 setback seatpost on August 20th and received it today, August 31st. I purchased it from eBay seller "cfbstore" for $26.99 with free shipping. The frame isn't back from the sign shop yet so no word on if it fits but so far everything seems great. Surprisingly at 172 grams, it came in well under the advertised weight of 200 grams plus or minus 10 grams. There are two things to note though. One is that it is advertised as UD Matte finish. When actually it is painted flat black. You can not see any of the fibers but when looking up through the bottom, you can see the 3k weave that was used. Second, is the shipping. It came in a timely manner and the packaging seemed sufficient. But when you see it, you will know.  :o

Here is a link to the one I bought.

http://www.ebay.com/itm/Full-Carbon-UD-Matt-Seatpost-Road-Mountain-Bikes-Cycling-Seatpost-27-2mm-SP2/371420652060?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140602152332%26meid%3D39c2799ff81d4f12936f915dd4f33978%26pid%3D100011%26rk%3D5%26rkt%3D10%26sd%3D381339767546








cmh

Re: Seat Post and handlebars
« Reply #10 on: September 01, 2015, 08:36:58 AM »
After getting so close to buying an 036 full suspension frame from Peter, I bought two sets of handlebars, the B7 flat bar and the B4 flat bar. The B7 was $35 and is supposed to be stronger because of dimples on the front - I got that in 720mm for my new bike, and the B4 is a more conventional straight bar that I got in 700mm for my wife's bike. She's been running 580mm Easton EC90 bars for a long time and is finally ready to try wider bars. We'll start at the 700mm size which should be faaaar too wide, and cut it down until she thinks it feels right. At that point I'll probably swap out name brand bars in that width.

TedS123

Re: Seat Post and handlebars
« Reply #11 on: September 01, 2015, 10:21:04 PM »
Hey cmh, I'm interested in any more info you can share about these bars. Do they have a standard sweep angle (~9°)? How do they look (finish, quality, etc.)? Did you get weights on them?

Thanks,
Ted

cmh

Re: Seat Post and handlebars
« Reply #12 on: September 06, 2015, 04:51:10 PM »
Hey cmh, I'm interested in any more info you can share about these bars. Do they have a standard sweep angle (~9°)? How do they look (finish, quality, etc.)? Did you get weights on them?

They look like a standard sweep - I didn't measure them at all, but they look like what I'd have expected.

Didn't weigh the B4 bars before I cut them down to 680mm - and have since cut them down to 660mm, as they're for my wife's bike, who has been running 580mm bars for a good long time.

The finish looks really good, zero complaints there, nice and understated.

Here are the bars installed on her bike (at 680mm width) with her old Easton EC90 580mm bars on top for reference. :)



I'll be able to weigh and get some photos of the B7 bars soon - they're at home and I'm not... Don't know what I think of the divots on the front of the bars, we'll see about that.

cmh

Re: Seat Post and handlebars
« Reply #13 on: September 17, 2015, 10:42:29 PM »
Sorry, haven't really followed up on this.

Not sure I love the B7 bar, the things on the front are strange. It is light, for sure, confirmed ~140g just like it says on the site.




One thing - the angle isn't nearly as much as the bars that came on my Epic... lining up the clamp area, you can see how much of a difference this is at the end of the bars:



That's a pretty big difference, you'd need a significantly different stem length to account for it. (yes, the photo isn't lined up perfectly)

Nothing wrong with the bars, but I much prefer the more understated look of the B4 bar, which was $5 less.

TedS123

Re: Seat Post and handlebars
« Reply #14 on: September 19, 2015, 07:47:19 AM »
Thanks for the report, cmh!

That's really good to know about the angle.  When I was ordering my CS-041 frame from Peter I almost ordered one of those bars, but decided not to because he didn't know the sweep angle.  I like a sweep of at least 9 degrees.  It's surprising how many of the chinese carbon dealers don't have the sweep angle listed for their bars.  For now I'll keep looking on ebay and Pinkbike for used carbon bars from known manufacturers.

Ted