Author Topic: New CarbonSpeed 27.5+/29+ Frame (CS-496)  (Read 27029 times)

circoloco

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #45 on: December 13, 2016, 01:54:36 AM »
A BB92 BB takes any standard crankset (the same as BSA 68 and 73 mm), it's just that with BB92 the bearings are inside the frame when they are outside for 68/73mm BB.
I finally got it, BB92. I'll only need a pressfit BB. Very good. So the Q factor is within a standard range (3,25 tires -> wider chainstays?), no fatsize crank spindles needed?

Once you'll get into the + size you'll just stick to it, trust me. Pick whatever rims width you want but not for such a wrong reason.
Ok, you're right. It's stupid to consider options that will never happen. This bike will be a 29+, basta.
BUT: I couldn't find any 29+ carbon wheelsets with 50mm on aliexpress or alibaba other than the ICAN wheelset for 590EUR with Powerway hubs (ICAN website) or Novatec hubs (ebay), Peter as well only lists the 40mm wheelset. I'm not capable of building wheels myself. Any recommendations?

bxcc

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #46 on: December 13, 2016, 06:12:12 AM »
A BB92 BB takes any standard crankset (the same as BSA 68 and 73 mm), it's just that with BB92 the bearings are inside the frame when they are outside for 68/73mm BB.
I finally got it, BB92. I'll only need a pressfit BB. Very good. So the Q factor is within a standard range (3,25 tires -> wider chainstays?), no fatsize crank spindles needed?

Once you'll get into the + size you'll just stick to it, trust me. Pick whatever rims width you want but not for such a wrong reason.
Ok, you're right. It's stupid to consider options that will never happen. This bike will be a 29+, basta.
BUT: I couldn't find any 29+ carbon wheelsets with 50mm on aliexpress or alibaba other than the ICAN wheelset for 590EUR with Powerway hubs (ICAN website) or Novatec hubs (ebay), Peter as well only lists the 40mm wheelset. I'm not capable of building wheels myself. Any recommendations?

Crankset - Standard 68/73 cranksets work fine. Yes you just need a BB92 bottom bracket. A longer spindle crankset will NOT work with the bottom bracket.

Wheels - It's good to consider it if you think it will definitely happen. But in reality, swapping tires is a pain in the but and probably won't happen after the first time or two. Peter may not list the wheels on the site but he can build any of the rims to the hubs he has listed.

Carbon_Dude

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #47 on: December 31, 2016, 08:50:55 PM »
Love my 29+ bikes, Trek put 50mm wide Sun-Ringle Mulefut SL aluminum rims on the Stache 7 and 9, but went do 40mm wide carbon rims for the Stache 9.8.  Both seem to work well with the Bontrager Chupacabra 29x3.0 tires (which are very good tires BTW).
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

Luke.moore

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #48 on: January 20, 2017, 08:40:35 PM »
Does anyone know which chris king headset works in this frame? For the king bottom bracket, I'm guessing the press fit 24 with kit #6 is what would work on this frame. Its what i've got in my Stache 9.

SportingGoods

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #49 on: January 23, 2017, 03:35:28 AM »
I don't know. I just bought the headset from CS. That's what I did with all my Chinese frames. Then I just replace the bearings, not the entire headset, (reading the reference on the bearings) with high quality (SKF, Enduro) when I need to replace (not often!).

carbonazza

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #50 on: January 23, 2017, 11:39:54 AM »
I don't know. I just bought the headset from CS. That's what I did with all my Chinese frames. Then I just replace the bearings, not the entire headset, (reading the reference on the bearings) with high quality (SKF, Enduro) when I need to replace (not often!).

I'm from another school :)
They are disposable parts to me. Especially the bottom bearing.
I buy cheap bearings from Aliexpress, or even the full headset for about $10 to $15

seat_boy

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #51 on: September 02, 2017, 04:48:52 PM »
Has anyone tried to fit a 29+ wheel in the forward (420mm) position on the chainstays on this frame? If the Stache can do it...
My blog, some of it about China Carbon stuff:
http://www.bikingtoplay.blogspot.com/

John75

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #52 on: March 28, 2018, 08:55:48 AM »
Hello Does anyone know if C496 frame can accommodate a single front chainring 38T?

tripleDot

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #53 on: April 02, 2018, 02:18:43 AM »
Hello Does anyone know if C496 frame can accommodate a single front chainring 38T?

38T chainring fits with lots of room in CS-496.
« Last Edit: April 02, 2018, 07:30:31 AM by tripleDot »
July 2020 - Custom Waltly Ti 29er
Nov 2018 - Custom Waltly Ti Gravel
Apr 2018 - CS-496 29x3.0 - stripped
Feb 2018 - CS-RB01 (SS Road)
Sep 2016 - CS-RB01 (road sold)
Jun 2016 - Chinese CF XC - stripped
Mar 2016 - Haro Projekt (sold)
Feb 2008 - Jamis Durango 29 (sold)
Mar 2001 - Scott Scale (sold)

ottoreni

Re: New CarbonSpeed 27.5+/29+ Frame (CS-496)
« Reply #54 on: April 05, 2018, 10:56:46 AM »
I just picked up one of the variations of this frame from AirWolf thru AlieExpress.  AirWolf was having their anniversary sale.   

It shipped out yesterday.  Should be here in about a week.

Even though I am excited, I will most likely not be able to build it up until summer.