Author Topic: cklein FM-M009 build  (Read 32337 times)

cklein

Re: cklein FM-M009 build
« Reply #15 on: July 19, 2016, 08:50:38 AM »
Ok, the first order is at home and I show you some pictures :D






Jar_head

Re: cklein FM-M009 build
« Reply #16 on: July 19, 2016, 09:09:29 AM »
That's frame is light  :o Looks good so far! What seatpost and saddle do you have there?
Workswell WCB-M-062: 7905 grams
Focus Cayo Evo 2.0: 6260 grams

For sale: http://bikemarkt.mtb-news.de/user/193302

cklein

Re: cklein FM-M009 build
« Reply #17 on: July 19, 2016, 03:04:17 PM »
It's an old seat post from china. Diameter is to small so the post doesn't fit. And the saddle is also from china and an older one. It's just in the frame for building. The new is on the way.

SportingGoods

Re: cklein FM-M009 build
« Reply #18 on: July 20, 2016, 03:06:55 AM »
Agreed, that frame is extremely light. The bars too (hopefully not too much).

Do you have multiple dropouts for the frame? I see the fork is through axle but the frame is QR.

cklein

Re: cklein FM-M009 build
« Reply #19 on: July 20, 2016, 12:48:00 PM »
Yes, there are also axle dropouts for the frame.
I have the first problem. Today I was looking for the hole where the brake cable comes out.

sorry for the bad quality.

I need a bigger hole for the cable. What can I do. Can I make with a drill a bigger hole? (the hole in the middle of the picture, where the cable comes out of the frame)
« Last Edit: July 20, 2016, 12:49:48 PM by cklein »

Jar_head

Re: cklein FM-M009 build
« Reply #20 on: July 20, 2016, 04:18:32 PM »
The brake hose really doesn't fit in the hole? Or is there any plug at the end of the hose? If so, I would remove this instead of drilling the hole wider. But that should work as well...
Workswell WCB-M-062: 7905 grams
Focus Cayo Evo 2.0: 6260 grams

For sale: http://bikemarkt.mtb-news.de/user/193302

cklein

Re: cklein FM-M009 build
« Reply #21 on: July 20, 2016, 04:42:31 PM »
There is no plug.  Tomorrow I'll show you the problem with another picture.

Carbon_Dude

Re: cklein FM-M009 build
« Reply #22 on: July 21, 2016, 06:39:35 AM »
Is there just a bit of material that needs to be cleaned out at the entrance/exit of the hole?  It's very rare for the brake line not to fit in the intended internal brake routing passage.  Make sure you feed the line from the caliper end up to the top tube.
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

cklein

Re: cklein FM-M009 build
« Reply #23 on: July 21, 2016, 11:26:15 AM »



So, on this pictures you can see what I mean. The hose you see is from a normal brake without fluid
« Last Edit: July 21, 2016, 11:29:16 AM by cklein »

SportingGoods

Re: cklein FM-M009 build
« Reply #24 on: July 22, 2016, 03:15:26 AM »
I can't see any problem from this picture. Well, maybe you feed the hose at an angle. I feed mine straight along the chainstay.

Would a smaller tube go through?
Have you tried to blow compressed air into the hole? Is there something stuck in there? Blow 8 bars into it, from the opposite side. Another option is to feed a cable, from the opposite side as well, to push anything that would be in the line.

cklein

Re: cklein FM-M009 build
« Reply #25 on: July 22, 2016, 03:40:59 AM »
Sorry, my english is not the best so I have to describe in my own words.

There is no way to put the hose into the hole. The angle is not the problem, the hole is to small. In the afternoon I´ll try it again.

SportingGoods

Re: cklein FM-M009 build
« Reply #26 on: July 22, 2016, 04:20:40 AM »
It really doesn't look like there is much missing to go through. It's probably just the entrance. I would gently drill, at slow speed, as straight as possible, the first 2 cm.

cklein

Re: cklein FM-M009 build
« Reply #27 on: July 23, 2016, 11:53:25 AM »
Ok, today I spend some time in the garage.
The hose from the shifters to the derailleurs are installed.
My "mechanic" helps me in with the cable for the brake.
No I have the problem that the switching eye don't work with the XT m8000 derailleur :(
I'll ask the Chinese dealer to help me. Maybe he knows which I need.

cklein

Re: cklein FM-M009 build
« Reply #28 on: July 23, 2016, 11:58:04 AM »

This is  screenshot from the workswell thread. This switching eye looks like there is an adaptation. I think I need this. What is it?





This is my derailleur. Looks different and I think that's the problem.
« Last Edit: July 23, 2016, 12:43:59 PM by cklein »