Author Topic: Lightcarbon LCFS937 Build  (Read 91874 times)

mtbluvr68

Re: Lightcarbon LCFS937 Build
« Reply #165 on: April 28, 2021, 01:25:21 PM »
2 michaeldepeza:
I see pic of RxR chinese wheelset even though it's not on the list. So, DON'T. EVAR.
Used this 29" shit on my carbon rigid mtb to run roads,

If you're going to use Chinese wheelsets get a decent set from light-bicycle , or ican or yoleo or nextie.  I have light bicycle built wheels on XC bike, Road bike and Gravel bike, they are very well built very strong wheels, but they cost about 700-900 a set .  My XC are hope pro2 evo hubs and dt swiss spokes and the road/gravel are novatect 791/792 hubs with pillar 1420 spokes.  From experience the $300-500 sets are sketchy as hell. 
2021 Tan Tan Seraph FM027  w/Light Bicycle wheels(XC)
2022 Marin Rift Zone 3 w/ elite wheels (trail)
2021 Tideace FMR185 w/Light Bicycle Wheels (road)
2023  Chasing Wind w/ elite wheels (Gravel)

Akerman

Re: Lightcarbon LCFS937 Build
« Reply #166 on: April 28, 2021, 01:58:32 PM »
Hey Bro and Guys im trying to choose ideal size....my present bike matched to this frame would put me in 19" frame choice however i initially was gonna order the 20.5 frame...my thinking now is that's too large as my Trek Superfly was extra large at 21"...a 2012 model....

i'm 5'10"
I'm 6' with short legs and could JUST fit the 150 mm Reverb B, the hose does a very sharp corner though. Would not work if it was a bowden...
I have a 19" frame, I think it fits me perfectly.

michaeldepeza

Re: Lightcarbon LCFS937 Build
« Reply #167 on: May 24, 2021, 06:54:39 PM »
Hey Guys,

So My Frame is done. just to get it shipped out now....My Country is still under lockdowns due to COVID19 so im gonna have enough time to build this baby before her unveiling and unleashing on my Trail Network.....

So Been through the chats regarding this frame....Wendy told me ill have to get all my shock mounting hardware online...



 
Question -Where can i buy a proper fit of shock hardware?
               
              -Which travel is the ideal one for rear shock?


michaeldepeza

Re: Lightcarbon LCFS937 Build
« Reply #168 on: May 28, 2021, 05:26:21 PM »
i just assumed that you were supposed to pick the 30x8mm set from that amazon link. i'll measure my frame when it arrives and report back.


Hey man...did you get through with your shock bushing issue and how far along are you on build?

michaeldepeza

Re: Lightcarbon LCFS937 Build
« Reply #169 on: June 19, 2021, 11:12:56 AM »
Hey Guys my frame arrived...

michaeldepeza

Re: Lightcarbon LCFS937 Build
« Reply #170 on: June 21, 2021, 03:16:14 PM »
test

StefanB

Re: Lightcarbon LCFS937 Build
« Reply #171 on: August 07, 2021, 01:21:00 AM »
Two new i mages of this amazing bike (LCFS958) I Named in Ahkalis with is the Sampi name of Akkelis. Here is the Akkebike Ahkalis with the mountain Akkelis in the background :-)


And another image from the top of another mountain.

michaeldepeza

Re: Lightcarbon LCFS937 Build
« Reply #172 on: August 20, 2021, 09:36:27 PM »
Hey guys is it just me or are others unable to get pg 12 to load?

StefanB

Re: Lightcarbon LCFS958 Build
« Reply #173 on: January 02, 2022, 02:58:44 PM »
I just have to say that the LCFS958 is still a great bike, love riding it. Maybe in todays tounge its more downcountry than trail, with 130/140 mm travel (?) But it climbs well, descends well, is easy to handle quite light, a great bike :-)

And after the issues with the AM831 I must say that Light Carbon frames fell very thought through and well made.

zilcho

Re: Lightcarbon LCFS937 Build
« Reply #174 on: April 18, 2024, 07:00:19 PM »
bump

zilcho

Re: Lightcarbon LCFS937 Build
« Reply #175 on: April 18, 2024, 07:00:47 PM »
bump

zilcho

Re: Lightcarbon LCFS937 Build
« Reply #176 on: April 18, 2024, 07:00:58 PM »
bump

zilcho

Re: Lightcarbon LCFS937 Build
« Reply #177 on: April 18, 2024, 07:01:18 PM »
dump

zilcho

Re: Lightcarbon LCFS937 Build
« Reply #178 on: April 18, 2024, 07:01:33 PM »
bump

zilcho

Re: Lightcarbon LCFS937 Build
« Reply #179 on: April 18, 2024, 07:01:46 PM »
bump