Is this a Transition clone?

[scourge]

https://www.alibaba.com/product-detail/2020-new-coming-full-suspension-29er_1600078214479.html?spm=a2700.details.deiletai6.4.31ca82ebBXHMnB

Looks a lot like the outgoing Transitions. Could be another interesting option.

[scourge]

Sorry about the misspell in the title

[Sitar_Ned]

Fixed it for you.

[endo.alley]

What is the head tube angle?

[scourge]

Thanks, Ned.

The Geo chart doesn't show the head angle. But man, it looks like a Transition to me. That linkage  style is dead on. Hopefully it has the Transition geometry. Could be another contender with the Hightower clone and the Firebird clone.

[Jotegr]

Could be another contender with the Hightower clone and the Firebird clone.

Ah yes, another contender with non-existent, maybe medium only bikes 

[endo.alley]

Looks like an updated P-9 to me. Similar frame. Similar linkage.  But maybe slacker head tube angle and steeper seat tube angle. Which could be a good thing.

[Verbl Kint]

Images above from the alibaba link from OP.

[Verbl Kint]

Here's the closest I could find for a geo comparo:


I'm a bit surprised it doesn't follow metric sizing (Alibaba chart shows 153mm, aka 6inches, of travel). No idea what the head angle could be, but I hope it's below 65 degrees.

Pasted the above images from the Alibaba link.

Pasting the 2018 Transition Sentinal geo below for comparison:

[endo.alley]

The transition appears to be a little slacker HTA. Although 551mm Axle to Crown seems pretty small. A 160Lyric is 571mm. So a 160 fork would slacken HTA.

[Verbl Kint]

The transition appears to be a little slacker HTA. Although 551mm Axle to Crown seems pretty small. A 160Lyric is 571mm. So a 160 fork would slacken HTA.

551 mm is, if I recall correctly, the A2C measurement for a 160mm 27.5 Rockshox fork.  That being said, a 160mm 29" fork would slacken it by half a degree, in a mullet setup, you slacken it up by 3/4 of a degree, at least.

[endo.alley]

This is a 29er right? If so 27.5" measurements shouldn't apply.

[Bajker]

Ah yes, another contender with non-existent, maybe medium only bikes 

So true lol

This is a 29er right? If so 27.5" measurements shouldn't apply.

If its 29er (probably is), then the travel is 140mm.

551 mm is, if I recall correctly, the A2C measurement for a 160mm 27.5 Rockshox fork.  That being said, a 160mm 29" fork would slacken it by half a degree, in a mullet setup, you slacken it up by 3/4 of a degree, at least.

27.5 Fox36 160mm is 549.1mm

I measured the drawing and headtube angle is ~67 degrees, stack ~626mm and reach is ~471mm (difficult to measure the pic is too pixelated).
And its 100 pieces min order, atm atleast.

[Denis]

Looks like Transition Smuggler clone )

But not 100% copy )

[CrownPerformance]

I enquired about ordering one. Frames are not available to purchase from the manufacturer until March 2021.