29er XC Hardtail - Boost - Modern Geometry

[T715]

I did order two M29 from Haideli, 69ºHA and 425mm chainstay in size M.
With a more reasonable and usual price for a HT: $350, then with accessories, paint and shipping to Europe at about $1400 for both.

How are your bikes coming along? hoping for some feedback....
Cheers

[carbonazza]

How are your bikes coming along? hoping for some feedback....
Cheers

They are in transit, I'll let you know.

[Arno Knell]

I did order two Spcycle SP-M05 Frame and two Spcycle MTB Fork.

https://a.aliexpress.com/_mLsDCEy
https://a.aliexpress.com/_mtAqdbS
Using Sellers Shipping Method (door to door).
Complete amount 1075,00 USD.
Also still in transit.
.

[carbonazza]

I did order two Spcycle SP-M05 Frame and two Spcycle MTB Fork.
...

They look great! I look forward for your feedback.

[bortoluca]

I'm looking for a HT carbon frame with a geometry like Banshee Paradox or Devinci Kobain

https://bike-stats.de/en/geometrie_vergleich?Bike1=BMC_TWOSTROKE%20AL%20SIX_2022_L&Bike2=Banshee_Paradox%20V3_2021_L&Bike3=Devinci_Kobain_2021_L

Anyone have any suggestions?

Thanks

[Arno Knell]

The SP-M05 Frame and the Spcycle MTB Fork are delivered.
All parts looks great.
The First Bike is assembled.
7,9 Kilogramm including Pedals.
Sorry for my poor english

[Seba MTB]

The SP-M05 Frame and the Spcycle MTB Fork are delivered.
All parts looks great.
The First Bike is assembled.
7,9 Kilogramm including Pedals.
Sorry for my poor english

Nice! What company is the cassette?

[Arno Knell]

Nice! What company is the cassette?

The cassette ist from garburak 10/50

[damianpia]

Any new HTs with modern geometry? I'm looking for something like BMC twostroke

[lilbigmacky]

The only thing I know of is the bxt-mtb-056. It has a 67.2 degree hta with 120mm fork and a 76-77 degree seat tube angle.

[damianpia]

Yeah, but saw one cracked here on forums, also it's ugly

[Spoker]

I have the bxt 056 and have ridden it hard over last month. Love it! The compliance out back is a little worrisome, but carbon is an amazing material. I feel post insertion is important .
Ps knobbie 2.6" without problem.

[pressedvinegar]

I ended up getting the Trifox. It does have 3 ports in the headtube, allowing for the internal dropper cable.

Overall, the quality is v good. I weighted the bare large frame at 912 grms.

Supplied seatpost is rubbish, a good bit less than 30.9, so loose in the frame and slipped during 1st ride. Dropper in there now.
The rear brake threads were tight, and I needed to add washers to the caliper bolt as the hole in the frame was not that deep.
The rear derailleur exit port was poor. I needed to dremel out the insert so I could feed in the outer casing.
I got the 740mm trifox flat bars, seem good quality and I weighed them at 152 grms.
Threaded BB is nice, 73mm so no spacers required.
2.35 maxxis tyres fit fine with good clearance.
The rest of the build was XT/SLX mix. Wheels are ztto
microspline hubs with carbonbearm rims. 1450 grms. Snail china xtr chainring copy is nice.

The Trifox sdy20 is 73mm bb?  Site has it listed as BSA 68mm.  Can you confirm?

[carbonazza]

The Trifox sdy20 is 73mm bb?  Site has it listed as BSA 68mm.  Can you confirm?

I found Trifox frames to be a little too expensive, for nothing great in return.
Carbonda just released one hardtail again with an interesting geometry: http://chinertown.com/index.php/topic,3800.0.html
I will probably build 2 of them in the coming weeks, to test.

[damianpia]

Sorry but 69 HA angle is nothing near "modern" or "progressive" geometry