Author Topic: Velobuild VB-R-168 Frame  (Read 269378 times)

wijmaar

Re: Velobuild VB-R-168 Frame
« Reply #240 on: July 07, 2021, 02:02:32 AM »
I don't know about the decals, I explicitly asked to only follow the color scheme and not add the decals as I don't want it to be a fake s-works.

fcs01

Re: Velobuild VB-R-168 Frame
« Reply #241 on: July 07, 2021, 03:00:16 AM »
In other news, it seems that VB bumped their shipping costs. It was $80 and now it is $112 for US, and from $64 or something to $95 to my country. That's pretty steep.

I noticed VAT collection also in Alix at checkout. (for IT and UK); so as EMS ships without pre-paid duties, it may be that they are now included, hence the increased cost. To be confirmed though

OlieSimpson

Re: Velobuild VB-R-168 Frame
« Reply #242 on: July 07, 2021, 03:18:54 AM »
Had confirmation from Chris this morning that the Chameleon paint colours are indeed pre-mixed and cannot be customised in the way I wanted. They are only available in Green, Red, Blue and Purple.

I'm a bit stumped with what I'd like now and might go the complete other end of the spectrum, and just get raw carbon with a high gloss clear coat like the Cervelo example below. Would expect this to also be a few grams lighter than a painted frame  ::)

I don't know about the decals, I explicitly asked to only follow the color scheme and not add the decals as I don't want it to be a fake s-works.

For the decals, I think it's just a flat fee of $30. I have only asked for 1x small sticker near the head tube and also paid $30.

jokage

Re: Velobuild VB-R-168 Frame
« Reply #243 on: July 07, 2021, 04:17:08 AM »
I'm a bit stumped with what I'd like now and might go the complete other end of the spectrum, and just get raw carbon with a high gloss clear coat like the Cervelo example below. Would expect this to also be a few grams lighter than a painted frame  ::)

The bonus point is that you will be able to inspect the layups.

vasnd

Re: Velobuild VB-R-168 Frame
« Reply #244 on: July 07, 2021, 09:58:45 AM »
Nah, iirc they always put on some sort of finishing coat. Haven't seen a bare frame yet.

OlieSimpson

Re: Velobuild VB-R-168 Frame
« Reply #245 on: July 08, 2021, 02:36:58 AM »
Nah, iirc they always put on some sort of finishing coat. Haven't seen a bare frame yet.

Correct, they don't offer a completely raw carbon frame as they are all coated.

In the end I've gone with a very similar paint job to Wijmaar with chameleon purple fading down to gloss black. Should be receiving my mock-up of the paint job later today.

wijmaar

Re: Velobuild VB-R-168 Frame
« Reply #246 on: July 08, 2021, 03:05:30 AM »
Correct, they don't offer a completely raw carbon frame as they are all coated.

In the end I've gone with a very similar paint job to Wijmaar with chameleon purple fading down to gloss black. Should be receiving my mock-up of the paint job later today.

Nice! I will share some better pictures (in daylight :D) once I have received the frame.

I just stumbled upon these pictures on the Velobuild website, really like the look of the Chameleon frame in daylight! (Not so sure about the saddle and the pedals though  :-X)




Nickk2000

Re: Velobuild VB-R-168 Frame
« Reply #247 on: July 08, 2021, 01:49:19 PM »
Nice! I will share some better pictures (in daylight :D) once I have received the frame.

I just stumbled upon these pictures on the Velobuild website, really like the look of the Chameleon frame in daylight! (Not so sure about the saddle and the pedals though  :-X)





Now that is a sexy bike.

jokage

Re: Velobuild VB-R-168 Frame
« Reply #248 on: July 09, 2021, 06:07:18 AM »
Nice! I will share some better pictures (in daylight :D) once I have received the frame.

I just stumbled upon these pictures on the Velobuild website, really like the look of the Chameleon frame in daylight! (Not so sure about the saddle and the pedals though  :-X)

Ugh. The more I saw the builds, the more I can't wait for my frame which is... still awaiting shipping.
« Last Edit: July 09, 2021, 06:08:51 AM by jokage »

OlieSimpson

Re: Velobuild VB-R-168 Frame
« Reply #249 on: July 09, 2021, 02:04:54 PM »
Ugh. The more I saw the builds, the more I can't wait for my frame which is... still awaiting shipping.

Been waiting long?

jokage

Re: Velobuild VB-R-168 Frame
« Reply #250 on: July 10, 2021, 02:27:27 AM »
Been waiting long?
Not that long :D . prob it's just me getting impatient (and whinny). It' my first time ordering a frame.

Mattias

Re: Velobuild VB-R-168 Frame
« Reply #251 on: July 10, 2021, 12:11:19 PM »
Update from Chris:
Yes, We sent one frame, only via mistake, we will send another ASAP

I really do not understand how that company works, how is possible if you have a invoice indicating two frames you only send one by 'mistake'

Nickk2000

Re: Velobuild VB-R-168 Frame
« Reply #252 on: July 10, 2021, 01:32:09 PM »
So they sent two frames for the price of one?

vasnd

Re: Velobuild VB-R-168 Frame
« Reply #253 on: July 11, 2021, 03:04:55 AM »
Is anyone running 140mm on front? Looks like I need to use the 160mm adapter..

Edit: nvm my dumb ass probably overlooked the double orientation of the adapter
« Last Edit: July 11, 2021, 04:25:47 AM by vasnd »

jokage

Re: Velobuild VB-R-168 Frame
« Reply #254 on: July 11, 2021, 05:48:01 AM »
I read that the bars that come with R-099 (mold 268) are not that stiff. How's 168's bars?