Tideace 2022 29er Boost 12*148mm New Mold MTB029

[Eddy-haideli]

Anyone looking for the carbon boost 29er frame?
Our new mold MTB029 12*148mm being done, the sample would be available next month.
Any interesting, feel free to contact me via email.

Eddy@haidelibicycle.com

Best regards
Eddy

[swatracing]

What ist the weight of the Medium Frame?

[Sahalee]

What is the effective seat angle on this?

[RobertRinAustin]

What is the effective seat angle on this?

75° according to the chart above.

[WASHOUT]

Am I correct in reading axle to crown measurement is 597 to 616mm depending on frame size?

[emu26]

Am I correct in reading axle to crown measurement is 597 to 616mm depending on frame size?

No, what the have called "shock" on the green table is actually "Stack" height. If you look at the geo chart and the table below it, you'll see the stack heights correlate with the "shock" size in the green table.

I tried to see what size fork it is for but can't work it out on any of the docs and I don't think Eddie has said yet what travel fork it is designed around.

[Sahalee]

The drawing shows two seat tube angles. The one to the bottom bracket is the effective seat tube angle. The one over the seat post is usually called the seat tube angle. The effective seat tube angle is generally steeper than the seat tube angle. It may be that the 75 degrees is the effective measure, but it is not clear.

[emu26]

The drawing shows two seat tube angles. The one to the bottom bracket is the effective seat tube angle. The one over the seat post is usually called the seat tube angle. The effective seat tube angle is generally steeper than the seat tube angle. It may be that the 75 degrees is the effective measure, but it is not clear.

It shows that it is to the effective saet tube angle (the line through the bb).  Click on the geo chart and it will enlarge showing what two lines the angle is measured between.

[Sahalee]

Awesome, thanks for the clarification!

[Sahalee]

Yup, I totally missed the letter E next to that angle…

[carbonazza]

Is this exclusively for a 100mm fork, or a slacker 120mm could work without trouble ?

[adriaanm]

Out of curiosity, I drew up the geometry for the medium frame. (EDIT: geo is very close to the 2021 chisel, albeit 1 deg less slack)

I might consider this frame at some point next year for my entry into the mtb world. I was severely underbiked on my gravel bike on the trails in the Ardèche a few weeks ago :-)

[Appendage]

The geo chart shows fork offset of 45.  Seems like most frames have gone to 51.  Your thoughts?

[cybrsrce]

The geo chart shows fork offset of 45.  Seems like most frames have gone to 51.  Your thoughts?

That is actually the other way around.  51mm has been the mainstay for a long time and many now are going 46,44, or even 42mm.

[Appendage]

Shows what I know.