Hygge Aero Carbon Frame

[ByAliTR]

Hello.

I also bought a hygge cadre set. yet at the shipping stage. it is generally mentioned that the cadre is hard.

I ordered by trusting the comments. I hope it is a very hard frame.

[landy88]

32 front and back is possible with conti GP 5000. Front has very litte clearance. i am now running 28 front and 30 rear, what looks better in my opinion.

for the frame holes with di2 i was searching quite a bit and used the following:
https://r2-bike.com/SRAM-Rahmenstopfen-Frame-Plug-63-mm-65-mm-1-Stueck

modified with hole for cable, they fit perfekt front and rear.

[AbsolutKen]

Here is some of my photos just to share around l.
Have not build it yet.

Want to check with you guys how you all stuff the DI2 battery at the seat post and make it stay?

This is my first time building a bike

[hahel]

Here is some of my photos just to share around l.
Have not build it yet.

Want to check with you guys how you all stuff the DI2 battery at the seat post and make it stay?

This is my first time building a bike

Lacking a dedicated batteryholder, iv'e used some of the foam material that the frame usually is wrapped with.
Wrap around the battery to get a snug/press fit in the seatpost.

[Xelge]

Hi guys,

I ordered the Hygge frame a month ago and yesterday it already arrived in Germany, although it was expected to arrive beginning of February. At first glance all looks pretty good, no obvious defects.
One small issue I came across…I tried to mount the bottom bracket as a small test but could not screw it in at first try (it’s a token triple8 for SRAM GXP). Anyone of you had problems with the BSA threads?
Will try it again when I come back home from Christmas holiday

[Fleckinger]

I didn't have any issues with bottom bracket thread. Everything was nice and smooth.

[TidyDinosaur]

I didn't have any issues with bottom bracket thread. Everything was nice and smooth.

Same here

[Xelge]

 Thanks for the info guys.
Had a quick look in the morning, tried it again and now it works smoothly

Will build it up throughout January. I already got most of the parts, only one important thing is missing…the groupset. I want to stay 11 speed so I can swap wheels easily from my other bike plus I already got the 11 speed sram red crankset. Probably going to buy the er9 but I am still wondering if I should maybe wait a little and see if the wheeltop group will be officially launched soon…

[AbsolutKen]

Hello newbie here, wanna check with you guys how much gap is needed between the top of the stem and expander plug? Wanna confirm this before I cut my fork

[Xelge]

I haven’t cut mine yet but maybe check henrychungs build on YT. I think he shows the way how he cut the fork.

Anyone replaced most of the standard screws with titanium screws and can provide an overview of the screw types, especially for stem and saddle?

[Eddy_Twerckx]

I am confused by your statement about the cockpit being flexible.
People write a fair amount of positive feedback on the "the one pro", kecevlo, etc. handlebars which are all the same as the one you got.

Maybe the Lack of siffness correlates with your headset Player issue and your high spacer stack.


Do the others have some additional feedback on the handlebars? I am thinking about getting a set.

I have the Kocevlo cockpit (40cm width, 120 stem) and it's super stiff. I raced crits on it all year. And I have a pretty decent sprint around 1,600W and weigh 85kg. Zero concerns about stiffness.

For the owners of the Hygge frame, how stiff is it? I'm looking for something super stiff.

[laktattausch]

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

[KalviDj]

Speedplay Comp pedals + Titanium upgrade kit (
https://a.aliexpress.com/_EG9zrtj) ~150g
Which carbon clamp did you get? I bought this one but the bottom part don't fit properly the gap of the seatpost

[laktattausch]

I had to combine 2 clamps.

Buttom of this: https://de.aliexpress.com/item/1005005134477962.html?spm=a2g0o.order_list.order_list_main.29.37295c5f1YBCFA&gatewayAdapt=glo2deu
Top of this: https://de.aliexpress.com/item/1005005284645155.html?spm=a2g0o.order_list.order_list_main.23.37295c5f1YBCFA&gatewayAdapt=glo2deu

[hahel]

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

For weightsaving a SROAD Monoblock cassette, if you can find one
That's 60gr off on paper, i have one on my bike it shifts ok, haven't compared shift quality with Ultegra though.

SROAD12 Speed Road Bicycle Cassette CNC 11-32T Freeewheel Fits Shimano Hub Super Light CNC 230g 12S Road Bike Casstte

MODEL:  WSD-8012-1132-A1
SPEED:  12S
SIZE:  131*44MM
TEETH: 11-32T (11-12-13-14-15-16-18-20-22-25-28-32)
WEIGHT:  230G
MATERIAL:  Chrome Molybdenum Vanadium Steel   Aviation aluminum alloy
CASSETTE: Fit Shimano Hub body
COLOR: SILVER, RAINBOW, GOLDEN, DARK GRAY.
CHAIN: BLACK COLOR SUMC 12 SPEED 12SL 126 LINKS WITH LOCK.